Plankton net: Difference between revisions
Warichrb29 (talk | contribs) No edit summary |
Tags: Mobile edit Mobile web edit Advanced mobile edit |
||
(43 intermediate revisions by 24 users not shown) | |||
Line 1: | Line 1: | ||
{{refimprove|date=January 2017}} |
|||
[[File:The upper part of plankton net.jpg|thumb|The upper part of plankton net consisting of (1) towing line connected to (2) three-point bridle, which are responsible for holding the plankton net]] |
[[File:The upper part of plankton net.jpg|thumb|The upper part of a plankton net consisting of (1) towing line connected to (2) three-point bridle, which are responsible for holding the plankton net]] |
||
⚫ | ''' |
||
⚫ | A '''plankton net''' is equipment used for collecting [[Sampling method|samples]] of [[plankton]] in standing bodies of water. It consists of a towing line and bridles, [[nylon]] [[mesh]] net, and a cod end. Plankton nets are considered one of the oldest, simplest and least expensive methods of sampling plankton.<ref name="Gutkowska">{{cite journal|last1=Gutkowska|first1=Agnieszka|last2=Paturej|first2=Ewa|last3=Kowalska|first3=Ewa|title=Qualitative and quantitative methods for sampling zooplankton in shallow coastal estuaries|journal= Ecohydrology & Hydrobiology|date=2012|volume=12|issue=3|pages=253–263|doi=10.1016/s1642-3593(12)70208-2|url=http://ecohydro.pl/files/archieves/2012_3/EH2012-3_252-263_Gutkowska.pdf}}</ref> The plankton net can be used for both vertical and horizontal sampling.<ref name="Gutkowska" /> It allows researchers to analyse plankton both [[quantitative research|quantitatively]] (cell density, cell colony or biomass) and [[qualitative property|qualitatively]] (e.g. Chlorophyll-a as a primary production of phytoplankton) in water samples from the environment. |
||
[[File:A simple plankton net.jpg|thumb|A simple plankton net]] |
[[File:A simple plankton net.jpg|thumb|A simple plankton net]] |
||
[[File:An outlet valve with bucket of the plankton net.jpg|thumb|Cod |
[[File:An outlet valve with bucket of the plankton net.jpg|thumb|Cod end—an outlet valve with collecting cylinder]] |
||
[[File:Plankton net casting at BLB.jpg|thumb|Aquatic scientist casting a plankton net in [[Brown's Lake Bog]].]] |
|||
⚫ | |||
The components of plankton nets could be separated into three common parts, which are towing line and bridles, nylon mesh net and cod end. |
|||
⚫ | |||
⚫ | |||
⚫ | |||
: The towing line and bridle is the upper part of a plankton net and used to hold it. The towing lines connected to the triangle bridles are made of [[nylon]] [[rope]] and can be adjust to a level suitable for the user. |
|||
⚫ | |||
⚫ | : The nylon mesh [[net (device)|net]] is the middle part of the plankton net and is used to [[filter feeder|filter]] the plankton in the water sample in accordance with the size of the mesh. In addition, its [[funnel]] shape makes it possible to effectively capture plankton of various sizes.<ref>{{cite web|last1=Office of Marine Programs|title=Plankton nets|url=http://www.coml.org/edu/tech/collect/planktonnets.htm|website=Census of Marine Life|publisher=University of Rhode Island}}</ref> There are various mesh sizes for nets, depending on the target [[microorganism]] to be collected and the condition of the [[water body]]. The narrower the mesh size, the smaller the plankton in the water sample.{{pb}} For example, in order to obtain small [[invertebrates]] measuring 50 to 1500 [[μm]], a net mesh size between 25 and 50 [[μm]] [[diameter]] should be selected, which is sufficient to effectively [[filter feeder|filter]] only the target [[organism]].<ref>{{cite web|last1=Valdecasas|first1=Antonio G.|last2=Aboal|first2=Marina|last3=Cirujano|first3=Santos|last4=Iepure|first4=Sanda|last5=Jaume|first5=Damia|last6=Proctor|first6=Heather|last7=Velasco|first7=Jose Luis|title=Sampling continental freshwater|url=http://imedea.uib-csic.es/damiajaume/DamiaJaumewebpage_archivos/PDFs/Sampling%20methods.pdf|publisher=The Mediterranean Institute for Advanced Studies (IMEDEA)}}</ref> However, in a [[eutrophic]] water condition, a plankton net with a mesh larger than 100 [[μm]] should be chosen to avoid clogging the net. |
||
⚫ | |||
⚫ | |||
==Use== |
|||
⚫ | |||
One common method for collecting a [[plankton]] sample is to tow the net horizontally using a low-speed boat. Before collecting the plankton, the net should be rinsed with the sample water. The user should ensure that the cod end is completely closed by turning the valve into a vertical position. Then the plankton net is then lowered horizontal to the water surface at the side of the slowly moving [[boat]]. Sampling is done for 1.5 minutes.<ref>{{cite web|last1=Tuney|first1=Inci|last2=Maroulakis|first2=Michalis|title=Technical assistance for capacity building on water quality monitoring-Phytoplankton sampling methods|url=http://www.suyonetimi.gov.tr/Libraries/su/Training_on_Phytoplankton_sampling_methods_-_EN.sflb.ashx|publisher=The European Union and the Republic of Turkey|accessdate=23 November 2016}}</ref> After this time, the plankton sample is collected in a sample bottle by opening the cod end above it by turning the valve horizontally. |
|||
When the sample is collected it can be analyzed using a [[microscope]] to identify the type of [[zooplankton]] or [[phytoplankton]], or a [[cell count]] can be undertaken to determine the plankton cell density of the water source. |
|||
Nylon mesh net is the middle part of the plankton net component, which can be used to [[filter]] the plankton in the water sample according to the size of the mesh net. In addition its [[funnel]] shape provide more possibility for the net to narrow down and catch the plankton net in varied size more effectively.<ref>{{cite web|last1=Office of Marine Programs|title=Plankton nets|url=http://www.coml.org/edu/tech/collect/planktonnets.htm|website=Census of Marine Life|publisher=University of Rhode Island}}</ref> There are various size of the mesh [[net]] varied by the target types of the [[microorganism]] that the researcher wants to collect and the condition of the [[water body]]. The narrower the mesh size is, the size of the plankton in the water sample would be smaller. |
|||
==History== |
|||
⚫ | |||
[[John Vaughan Thompson]] developed a plankton net during his return voyage from Mauritius, which reached the UK in 1816. Impressed by marine [[bioluminescence]] in small crustacea he later named ''[[Sapphirina]]'', he felt "under great obligations to this beautiful little animal, which by its splendid appearance in the water induced me to commence the use of a muslin hoop-net, which when it failed to procure me a specimen, brought up such a profusion of other marine animals altogether invisible while in the sea, as to induce a continued use of it on every favourable opportunity." He published his research in a series of six memoirs from 1828 to 1834.<ref name="1927 bio">{{cite web | title=John Vaughan Thompson (1779 - 1847) | date=30 January 1927 | url=http://www.bellsite.id.au/gdbtree/HTMLFiles/HTMLFiles_60/P11242.html | accessdate=20 November 2016 | archive-url=https://web.archive.org/web/20160706081556/http://bellsite.id.au/gdbtree/HTMLFiles/HTMLFiles_60/P11242.html | archive-date=6 July 2016 | url-status=dead }}</ref> |
|||
The second recorded use of a plankton net was by [[Charles Darwin]] on 10 January 1832, during the [[Second voyage of HMS Beagle#Atlantic islands|''Beagle'' survey voyage]]. His diary included a sketch of the net, which appears to have been based on a trawl net described by [[John Coldstream]] in a letter to Darwin. It is possible that Thompson's idea had earlier been drawn to Darwin's attention by [[Robert Edmond Grant]] in Edinburgh. Darwin describes this "contrivance" as "a bag four feet deep, made of bunting, & attached to [a] semicircular bow this by lines is kept upright, & dragged behind the vessel". The next day he remarked that "The number of animals that the net collects is very great & fully explains the manner so many animals of a large size live so far from land. — Many of these creatures so low in the scale of nature are most exquisite in their forms & rich colours. — It creates a feeling of wonder that so much beauty should be apparently created for such little purpose."<ref>{{Citation |
|||
⚫ | |||
| last= Keynes |
|||
| first= Richard |
|||
| author-link = Richard Keynes |
|||
| year= 2001 |
|||
| title=Charles Darwin's Beagle Diary |
|||
| publisher=Cambridge University Press |
|||
| pages =[http://darwin-online.org.uk/content/frameset?pageseq=53&itemID=F1925&viewtype=text 21–22] |
|||
}}</ref> |
|||
==See also== |
|||
⚫ | |||
* [[Ichthyoplankton#Sampling methods|Ichthyoplankton sampling methods]] |
|||
* [[Continuous Plankton Recorder]] |
|||
* [[Video plankton recorder]] |
|||
==References== |
==References== |
Latest revision as of 16:19, 12 June 2022
This article needs additional citations for verification. (January 2017) |
A plankton net is equipment used for collecting samples of plankton in standing bodies of water. It consists of a towing line and bridles, nylon mesh net, and a cod end. Plankton nets are considered one of the oldest, simplest and least expensive methods of sampling plankton.[1] The plankton net can be used for both vertical and horizontal sampling.[1] It allows researchers to analyse plankton both quantitatively (cell density, cell colony or biomass) and qualitatively (e.g. Chlorophyll-a as a primary production of phytoplankton) in water samples from the environment.
Components
[edit]- Towing line and bridle
- The towing line and bridle is the upper part of a plankton net and used to hold it. The towing lines connected to the triangle bridles are made of nylon rope and can be adjust to a level suitable for the user.
- Nylon mesh net
- The nylon mesh net is the middle part of the plankton net and is used to filter the plankton in the water sample in accordance with the size of the mesh. In addition, its funnel shape makes it possible to effectively capture plankton of various sizes.[2] There are various mesh sizes for nets, depending on the target microorganism to be collected and the condition of the water body. The narrower the mesh size, the smaller the plankton in the water sample. For example, in order to obtain small invertebrates measuring 50 to 1500 μm, a net mesh size between 25 and 50 μm diameter should be selected, which is sufficient to effectively filter only the target organism.[3] However, in a eutrophic water condition, a plankton net with a mesh larger than 100 μm should be chosen to avoid clogging the net.
- Cod end
- The cod end is located in the lower part of the plankton net at the end of the funnel. It has a collecting cylinder and a valve for opening and closing it.
Use
[edit]One common method for collecting a plankton sample is to tow the net horizontally using a low-speed boat. Before collecting the plankton, the net should be rinsed with the sample water. The user should ensure that the cod end is completely closed by turning the valve into a vertical position. Then the plankton net is then lowered horizontal to the water surface at the side of the slowly moving boat. Sampling is done for 1.5 minutes.[4] After this time, the plankton sample is collected in a sample bottle by opening the cod end above it by turning the valve horizontally.
When the sample is collected it can be analyzed using a microscope to identify the type of zooplankton or phytoplankton, or a cell count can be undertaken to determine the plankton cell density of the water source.
History
[edit]John Vaughan Thompson developed a plankton net during his return voyage from Mauritius, which reached the UK in 1816. Impressed by marine bioluminescence in small crustacea he later named Sapphirina, he felt "under great obligations to this beautiful little animal, which by its splendid appearance in the water induced me to commence the use of a muslin hoop-net, which when it failed to procure me a specimen, brought up such a profusion of other marine animals altogether invisible while in the sea, as to induce a continued use of it on every favourable opportunity." He published his research in a series of six memoirs from 1828 to 1834.[5]
The second recorded use of a plankton net was by Charles Darwin on 10 January 1832, during the Beagle survey voyage. His diary included a sketch of the net, which appears to have been based on a trawl net described by John Coldstream in a letter to Darwin. It is possible that Thompson's idea had earlier been drawn to Darwin's attention by Robert Edmond Grant in Edinburgh. Darwin describes this "contrivance" as "a bag four feet deep, made of bunting, & attached to [a] semicircular bow this by lines is kept upright, & dragged behind the vessel". The next day he remarked that "The number of animals that the net collects is very great & fully explains the manner so many animals of a large size live so far from land. — Many of these creatures so low in the scale of nature are most exquisite in their forms & rich colours. — It creates a feeling of wonder that so much beauty should be apparently created for such little purpose."[6]
See also
[edit]References
[edit]- ^ a b Gutkowska, Agnieszka; Paturej, Ewa; Kowalska, Ewa (2012). "Qualitative and quantitative methods for sampling zooplankton in shallow coastal estuaries" (PDF). Ecohydrology & Hydrobiology. 12 (3): 253–263. doi:10.1016/s1642-3593(12)70208-2.
- ^ Office of Marine Programs. "Plankton nets". Census of Marine Life. University of Rhode Island.
- ^ Valdecasas, Antonio G.; Aboal, Marina; Cirujano, Santos; Iepure, Sanda; Jaume, Damia; Proctor, Heather; Velasco, Jose Luis. "Sampling continental freshwater" (PDF). The Mediterranean Institute for Advanced Studies (IMEDEA).
- ^ Tuney, Inci; Maroulakis, Michalis. "Technical assistance for capacity building on water quality monitoring-Phytoplankton sampling methods". The European Union and the Republic of Turkey. Retrieved 23 November 2016.
- ^ "John Vaughan Thompson (1779 - 1847)". 30 January 1927. Archived from the original on 6 July 2016. Retrieved 20 November 2016.
- ^ Keynes, Richard (2001), Charles Darwin's Beagle Diary, Cambridge University Press, pp. 21–22