Jump to content

Trailer brake controller: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
m Hydraulic Over Electric Controller: Cleanup/Typo fixing, typo(s) fixed: with it's → with its using AWB
Types: Change to def list
 
(27 intermediate revisions by 23 users not shown)
Line 1: Line 1:
A [[brake]] controller is usually an [[Original equipment manufacturer|OEM]] or aftermarket installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer’s electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a [[Trailer (vehicle)|trailer]] surge braking system unless using modern electric over hydraulic devices. The trailer in this case usually has either [[electric friction brake]]s or Electric-Hydraulic Trailer Brake Actuators.
A [[brake]] controller is usually an [[original equipment manufacturer]] or aftermarket-installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer's electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a [[Trailer (vehicle)|trailer]] [[Overrun brake|surge braking system]] unless using modern electric over hydraulic devices. The trailer in this case usually has either [[electric friction brake]]s or electric-hydraulic trailer brake actuators.


Most basic brake controllers will generally have a +/- gain adjustment. The tow vehicle operator would set the gain as high as possible but without the trailer brakes locking-up after making a few test stops. The heavier the trailer, the higher the gain adjustment would be set and therefore the less chances of wheel lock-up.<ref name="Hurricane">{{cite web|url=http://www.hurricanecargo.com/index.php/default/Blog/brakecontroller/|title=How to adjust a trailer brake controller}}</ref>
Most basic brake controllers will generally have a plus-minus gain adjustment. The tow vehicle operator sets the gain as high as possible but without the trailer brakes locking up after making a few test stops. The heavier the trailer, the higher the gain adjustment is set and therefore the less chances of wheel lock-up.<ref name="Hurricane">{{cite web|url=http://www.bestelectricbrakecontrollers.com/trailer-brake-controllers-the-complete-guide/|title=Trailer Brake Controllers-The Complete Guide}}</ref>


A wide range of trailers will contain trailer brakes (for example; larger boat trailers, [[horse trailer]]s, covered utility trailers, [http://www.hurricanecargo.com enclosed trailers], travel trailers including small 10-foot and longer tent trailers and car carriers). Smaller trailers may not contain trailer brakes (for example; basic 4'x8' utility trailers). It is highly recommended that, if the total trailer weight is over a couple thousand pounds, the trailer have some sort of braking system, and the tow vehicle be equipped with a brake controller.<ref name="PS1951">{{cite book|url=http://books.google.com/books?id=0SADAAAAMBAJ&pg=PA103&dq=popular+science+1951+how+your+train+stops&hl=en&ei=k4S-TLmzA5WlngeQ7diJDg&sa=X&oi=book_result&ct=result&resnum=1&ved=0CC8Q6AEwAA#v=onepage&q&f=true|title=''What You Should Know About Trailer Brakes'' 1951 Popular Science article that covers the basics very well}}</ref><ref name="PS2">{{cite book|url=http://books.google.com/books?id=FyoDAAAAMBAJ&pg=PA111&dq=popular+science+1930&hl=en&sa=X&ei=4EH4TvrBEcbEgQfxu5ykAg&ved=0CDMQ6AEwADhu#v=onepage&q&f=true|title=What You Should Know About Trailer Brakes, Popular Science, July 1969, pp. 111-113, an update of the 1951 article.}}</ref>
A wide range of trailers contain trailer brakes (for example, larger boat trailers, [[horse trailer]]s, covered utility trailers, enclosed trailers, travel trailers including small {{convert|10|ft|disp=or|adj=on}} and longer tent trailers and car carriers). Smaller trailers may not contain trailer brakes (for example, basic {{convert|4|x|8|ft|m|disp=or|adj=on}} utility trailers). It is recommended that, if the total trailer weight is over a couple thousand kilograms, the trailer have some sort of braking system, and the tow vehicle be equipped with a brake controller.<ref name="PS1951">{{cite book|url=https://books.google.com/books?id=0SADAAAAMBAJ&dq=popular+science+1951+how+your+train+stops&pg=PA103|title=''What You Should Know About Trailer Brakes'' 1951 Popular Science article that covers the basics very well|date=July 1951}}</ref><ref name="PS2">{{cite book|url=https://books.google.com/books?id=FyoDAAAAMBAJ&dq=popular+science+1930&pg=PA111|title=What You Should Know About Trailer Brakes, Popular Science, July 1969, pp. 111-113, an update of the 1951 article.|date=July 1969}}</ref>


== Controller Types ==
== Types ==
There are a few different types of brake controllers that are currently or previously on the market.
There are different types of brake controllers currently or previously on the market.


; Air-actuated electric brake controller
No actual brand preference is intended here, just be aware that the sooner the trailer brakes are applied after the pedal is pressed the shorter the braking distance will be.
: This controller uses the air pressure of the brake system on a vehicle with [[Air brake (road vehicle)|pneumatic brakes]] to provide a current to control the electric brakes of a trailer.<ref name="Hayes Air Actuated">{{cite web|url=http://www.hayesbc.com/?page_id=1065|title=Hayes Air Actuated brake controller|url-status=dead|archiveurl=https://archive.today/20131002201404/http://www.hayesbc.com/?page_id=1065|archivedate=2013-10-02}}</ref>

; Hydraulic-actuated electric controller
=== Air Actuated Electric Brake Controller ===
This controller uses the air pressure of the brake system on a vehicle with [[Air brake (road vehicle)|pneumatic brakes]] to provide a current to control the electric brakes of a trailer.<ref name="Hayes Air Actuated">{{cite web|url=http://www.hayesbc.com/?page_id=1065|title=Hayes Air Actuated brake controller}}</ref>
: This controller uses the hydraulic pressure of the brake system on a vehicle with [[hydraulic brake]]s to provide a current to control the electric brakes of a trailer.<ref name="Maxbrake">{{cite web|url=http://www.plugitright.com/MaxBrakeController.html|title=Maxbrake controller|url-status=dead|archiveurl=https://web.archive.org/web/20091226182121/http://www.plugitright.com/MaxBrakeController.html|archivedate=2009-12-26}}</ref> Some truck manufacturers offers this as an OEM option, like Ford with its [[Ford TowCommand]].
; Pedal-mounted pressure pad proportional controller;

: A separate sensor is mounted on the brake pedal to connect to the controller.<ref name="Sensabrake">{{cite web|url=http://www.alko.com.au/vehicle-technology/sensabrake/|title=AL-KO Sensabrake controller}}</ref>
=== Hydraulic Over Electric Controller ===
; Proportional brake controller
This controller uses the hydraulic pressure of the brake system on a vehicle with [[hydraulic brake]]s to provide a current to control the electric brakes of a trailer.<ref name="Maxbrake">{{cite web|url=http://www.plugitright.com/MaxBrakeController.html|title=Maxbrake controller}}</ref> Some truck manufacturers offers this as an OEM option, like Ford with its [[Ford TowCommand]].
: Senses the deceleration of the vehicle through a pendulum or similar device to apply a suitable current for braking of the trailer.<ref name="Tekonsha">{{cite web|url=http://www.tekonsha.com/content/products.aspx?lvl=2&parentid=1400&catID=1435&part=0|title=Tekonsha proportional brake controllers}}</ref><ref name="Curt">{{cite web|url=http://www.curtmfg.com/Category/200/Brake%20Controllers|title=Curt brake controllers}}</ref><ref name="Draw-Tite Proportional">{{cite web|url=http://www.draw-tite.com/content/products.aspx?lvl=2&parentid=1400&catID=1435&part=0|title=Draw-Tite Proportional brake controllers}}</ref>

; [[Overrun brake|Surge brake]]
=== Pedal mounted pressure pad proportional controller ===
: When the tow vehicle slows down the trailer pushes against it, an actuator applies force to its master cylinder and the hydraulic pressure is transferred to the brakes<ref Name="NAME">{{cite web | title = Hydraulic Surge Trailer Brake Actuators | url = http://www.easternmarine.com/Hydraulic-Surge-Brake-Actuators/
A separate sensor is mounted on the brake pad to connect to the controller.<ref name="Sensabrake">{{cite web|url=http://www.alko.com.au/vehicle-technology/sensabrake/|title=AL-KO Sensabrake controller}}</ref>
| accessdate = 2014-11-21 }}</ref>

; Time-delayed brake controller
=== Proportional Brake Controller ===
Senses the deceleration of the vehicle through a pendulum or similar device to apply a suitable current for braking of the trailer.<ref name="Tekonsha">{{cite web|url=http://www.tekonsha.com/content/products.aspx?lvl=2&parentid=1400&catID=1435&part=0|title=Tekonsha proportional brake controllers}}</ref><ref name="Curt">{{cite web|url=http://www.curtmfg.com/Category/200/Brake%20Controllers|title=Curt brake controllers}}</ref><ref name="Draw-Tite Proportional">{{cite web|url=http://www.draw-tite.com/content/products.aspx?lvl=2&parentid=1400&catID=1435&part=0|title=Draw-Tite Proportional brake controllers}}</ref>
: Applies brake current with a ramp-up over time to a certain level set by the driver.<ref name="Curt">{{cite web|url=http://www.curtmfg.com/Category/200/Brake%20Controllers|title=Curt brake controllers}}</ref><ref name="Draw-Tite Proportional" /><ref name="Hopkins">{{cite web|url=http://www.hopkinstowingsolutions.com/products/brake-controllers/brake-controllers.html|title=Hopkins brake controllers}}</ref>

=== Time Delayed Brake Controller ===
Applies brake current with a ramp-up over time to a certain level set by the driver.<ref name="Curt">{{cite web|url=http://www.curtmfg.com/Category/200/Brake%20Controllers|title=Curt brake controllers}}</ref><ref name="Draw-Tite Proportional">{{cite web|url=http://www.draw-tite.com/content/products.aspx?lvl=2&parentid=1400&catID=1405&part=0|title=Draw-Tite Time Based brake controllers}}</ref><ref name="Hopkins">{{cite web|url=http://www.hopkinstowingsolutions.com/products/brake-controllers/brake-controllers.html|title=Hopkins brake controllers}}</ref>


==References==
==References==
Line 31: Line 28:
[[Category:Vehicle braking technologies]]
[[Category:Vehicle braking technologies]]
[[Category:Automotive accessories]]
[[Category:Automotive accessories]]
[[Category:Vehicle modification]]
[[Category:Vehicle modifications]]

Latest revision as of 15:40, 21 August 2023

A brake controller is usually an original equipment manufacturer or aftermarket-installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer's electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a trailer surge braking system unless using modern electric over hydraulic devices. The trailer in this case usually has either electric friction brakes or electric-hydraulic trailer brake actuators.

Most basic brake controllers will generally have a plus-minus gain adjustment. The tow vehicle operator sets the gain as high as possible but without the trailer brakes locking up after making a few test stops. The heavier the trailer, the higher the gain adjustment is set and therefore the less chances of wheel lock-up.[1]

A wide range of trailers contain trailer brakes (for example, larger boat trailers, horse trailers, covered utility trailers, enclosed trailers, travel trailers including small 10-foot or 3.0-metre and longer tent trailers and car carriers). Smaller trailers may not contain trailer brakes (for example, basic 4-by-8-foot or 1.2-by-2.4-metre utility trailers). It is recommended that, if the total trailer weight is over a couple thousand kilograms, the trailer have some sort of braking system, and the tow vehicle be equipped with a brake controller.[2][3]

Types

[edit]

There are different types of brake controllers currently or previously on the market.

Air-actuated electric brake controller
This controller uses the air pressure of the brake system on a vehicle with pneumatic brakes to provide a current to control the electric brakes of a trailer.[4]
Hydraulic-actuated electric controller
This controller uses the hydraulic pressure of the brake system on a vehicle with hydraulic brakes to provide a current to control the electric brakes of a trailer.[5] Some truck manufacturers offers this as an OEM option, like Ford with its Ford TowCommand.
Pedal-mounted pressure pad proportional controller;
A separate sensor is mounted on the brake pedal to connect to the controller.[6]
Proportional brake controller
Senses the deceleration of the vehicle through a pendulum or similar device to apply a suitable current for braking of the trailer.[7][8][9]
Surge brake
When the tow vehicle slows down the trailer pushes against it, an actuator applies force to its master cylinder and the hydraulic pressure is transferred to the brakes[10]
Time-delayed brake controller
Applies brake current with a ramp-up over time to a certain level set by the driver.[8][9][11]

References

[edit]
  1. ^ "Trailer Brake Controllers-The Complete Guide".
  2. ^ What You Should Know About Trailer Brakes 1951 Popular Science article that covers the basics very well. July 1951.
  3. ^ What You Should Know About Trailer Brakes, Popular Science, July 1969, pp. 111-113, an update of the 1951 article. July 1969.
  4. ^ "Hayes Air Actuated brake controller". Archived from the original on 2013-10-02.
  5. ^ "Maxbrake controller". Archived from the original on 2009-12-26.
  6. ^ "AL-KO Sensabrake controller".
  7. ^ "Tekonsha proportional brake controllers".
  8. ^ a b "Curt brake controllers".
  9. ^ a b "Draw-Tite Proportional brake controllers".
  10. ^ "Hydraulic Surge Trailer Brake Actuators". Retrieved 2014-11-21.
  11. ^ "Hopkins brake controllers".