Jump to content

MasterFormat: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous edit
Content deleted Content added
VisualWikitext
Zippydo121 (talk | contribs)
252 edits
m minor copy edits
 
(12 intermediate revisions by 12 users not shown)
Line 1: Line 1:
{{Short description|System for organizing construction project manuals}}
'''MasterFormat''' is a standard for organizing [[specification]]s and other written information for commercial and institutional [[building]] projects in the U.S. and Canada.<ref>Mowrer, F. "[http://www.fire.nist.gov/bfrlpubs/fire94/PDF/f94029.pdf Development of the fire Data Management System]" Department of Fire Protection and Engineering, NIST-GCR-94-693, August 1993.</ref> Sometimes referred to as the "Dewey Decimal System" of building construction, MasterFormat is a product of the [[Construction Specifications Institute]] (CSI) and [http://www.csc-dcc.ca/ Construction Specifications Canada] (CSC). It provides a master list of Divisions, and Section numbers with associated titles within each Division, to organize information about a facility’s [[construction]] requirements and associated activities.<ref>Charette, R. and Marshall, A. "[http://www.fire.nist.gov/bfrlpubs/build99/PDF/b99080.pdf Uniformat II Elemental classification for Building Specifications, Cost Estimating, and Cost Analysis]," NIST BFRL Office of applied Economics, NISTIR6389, October 1999.</ref>
'''MasterFormat''' is a standard for organizing [[specification]]s and other written information for commercial and institutional [[building]] projects in the U.S. and Canada.<ref>Mowrer, F. "[http://www.fire.nist.gov/bfrlpubs/fire94/PDF/f94029.pdf Development of the fire Data Management System] {{Webarchive|url=https://web.archive.org/web/20170125170557/http://fire.nist.gov/bfrlpubs//fire94/PDF/f94029.pdf |date=2017-01-25 }}" Department of Fire Protection and Engineering, NIST-GCR-94-693, August 1993.</ref> Sometimes referred to as the "Dewey Decimal System" of building construction, MasterFormat is a product of the [[Construction Specifications Institute]] (CSI) and [http://www.csc-dcc.ca/ Construction Specifications Canada] (CSC). It provides a master list of Divisions, and Section numbers with associated titles within each Division, to organize information about a facility’s [[construction]] requirements and associated activities.<ref>Charette, R. and Marshall, A. "[http://www.fire.nist.gov/bfrlpubs/build99/PDF/b99080.pdf Uniformat II Elemental classification for Building Specifications, Cost Estimating, and Cost Analysis]," NIST BFRL Office of applied Economics, NISTIR6389, October 1999.</ref>


MasterFormat is used throughout the construction industry to format specifications for construction contract documents. The purpose of this format is to assist the user in organizing information into distinct groups when creating contract documents, and to assist the user searching for specific information in consistent locations. The information contained in MasterFormat is organized in a standardized outline format within [[50 Divisions]] ([[16 Divisions]] pre-2004). Each Division is subdivided into a number of Sections.<ref>Ross Spiegel and Dru Meadows, Green Building Materials: A Guide to Product Selection and Specification, John Wiley & Sons, Inc., New York, 1999.</ref>
MasterFormat is used throughout the construction industry to format specifications for construction contract documents. The purpose of this format is to assist the user in organizing information into distinct groups when creating contract documents, and to assist the user searching for specific information in consistent locations. The information contained in MasterFormat is organized in a standardized outline format within [[50 Divisions]] ([[16 Divisions]] pre-2004). Each Division is subdivided into a number of Sections.<ref>Ross Spiegel and Dru Meadows, Green Building Materials: A Guide to Product Selection and Specification, John Wiley & Sons, Inc., New York, 1999.</ref>


==History==
==History==
After World War II, building construction specifications began to expand, as more advanced materials and choices were made available.<ref name="history">{{cite web|last1=Clendining |first1=Warren |title=History of Specifications |url=http://www.technical-expressions.com:80/mf/spec-history/index.html |website=Technical Expressions |accessdate=28 May 2017 |archiveurl=https://web.archive.org/web/20130322234436/http://www.technical-expressions.com/mf/spec-history/index.html |archivedate=22 March 2013 |date=2009 |url-status=dead }}</ref> The [[Construction Specifications Institute]] (CSI) was founded in 1948 and began to address the organization of specifications into a numbering system. In 1963, they published a format for construction specifications, with 16 major divisions of work. A 1975 CSI publication used the term MasterFormat. The last CSI MasterFormat publication to use the 16 divisions was in 1995, and this is no longer supported by CSI. In November 2004, MasterFormat expanded from [[16 Divisions]] to [[50 Divisions]], reflecting innovations in the construction industry and expanding the coverage to a larger part of the construction industry.<ref name="whatnumber">{{cite web|title=What's My MasterFormat Number?|url=https://www.csiresources.org/practice/standards/masterformat/masterformat-number|website=CSI|accessdate=28 May 2017}}</ref> Revised editions were published in 2010, 2011, 2012, 2014, 2016, and 2018.<ref name="whatnumber" />
After World War II, building construction specifications began to expand, as more advanced materials and choices were made available.<ref name="history">{{cite web|last1=Clendining |first1=Warren |title=History of Specifications |url=http://www.technical-expressions.com:80/mf/spec-history/index.html |website=Technical Expressions |accessdate=28 May 2017 |archiveurl=https://web.archive.org/web/20130322234436/http://www.technical-expressions.com/mf/spec-history/index.html |archivedate=22 March 2013 |date=2009 |url-status=dead }}</ref> The [[Construction Specifications Institute]] (CSI) was founded in 1948 and began to address the organization of specifications into a numbering system. In 1963, they published a format for construction specifications, with 16 major divisions of work. A 1975 CSI publication used the term MasterFormat. The last CSI MasterFormat publication to use the 16 divisions was in 1995, and this is no longer supported by CSI. In November 2004, MasterFormat expanded from [[16 Divisions]] to [[50 Divisions]], reflecting innovations in the construction industry and expanding the coverage to a larger part of the construction industry.<ref name="whatnumber">{{cite web|title=What's My MasterFormat Number?|url=https://www.csiresources.org/practice/standards/masterformat/masterformat-number|website=CSI|accessdate=28 May 2017}}</ref> Revised editions were published in 2010, 2011, 2012, 2014, 2016, 2018, and 2020.<ref name="whatnumber" />


=== Timeline ===
=== Timeline ===
Line 10: Line 11:
* 1966: CSC produced '''The Building Construction Index''' with similar data
* 1966: CSC produced '''The Building Construction Index''' with similar data
* 1972: CSI and CSC merge their systems and publish as '''Uniform Construction Index'''
* 1972: CSI and CSC merge their systems and publish as '''Uniform Construction Index'''
*1978: First published under the name MasterFormat
* 1995: Extensive public review with industry users
* 1995: Extensive public review with industry users
* 2004: Major expansion to address overcrowded divisions. Additional divisions added to include infrastructure and process equipment divisions.
* 2004: Major expansion to address overcrowded divisions. Additional divisions added to include infrastructure and process equipment divisions.


==Advantages==
==Advantages==
Standardizing the presentation of such information improves communication among all parties involved in construction projects, which helps the project team deliver structures to owners according to their requirements, timelines, and budgets. The [[ASTM International|ASTM]] standard for sustainability assessment of building products relies on MasterFormat to organize the data.<ref>ASTM Standard E2129-05, 2005, "[http://www.astm.org/Standards/E2129.htm Standard Practice for Data Collection for Sustainability Assessment of Building Products]", [[ASTM International]], West Conshohocken, PA, 2005, {{doi|10.1520/E2129-05}}</ref> MasterFormat is an organizational component of [[MasterSpec]], SpecText, National Master Specification (NMS), Building Systems Design [https://bsdspeclink.com/speclink/ (SpecLink)], and SpecsIntact systems. Manufactures will often publish specifications for their products based on MasterFormat. Design teams may maintain office master section based on MasterFormat and pull specifications from multiple sources. MasterFormat provides the overall organizational structure that makes pulling sections from different sources possible.
Standardizing the presentation of such information improves communication among all parties involved in construction projects, which helps the project team deliver structures to owners according to their requirements, timelines, and budgets. The [[ASTM International|ASTM]] standard for sustainability assessment of building products relies on MasterFormat to organize the data.<ref>ASTM Standard E2129-05, 2005, "[http://www.astm.org/Standards/E2129.htm Standard Practice for Data Collection for Sustainability Assessment of Building Products]", [[ASTM International]], West Conshohocken, PA, 2005, {{doi|10.1520/E2129-05}}</ref> MasterFormat is an organizational component of [https://bsdspeclink.com/speclink/ Building Systems Design - SpecLink], [[MasterSpec]], SpecText, National Master Specification (NMS), and SpecsIntact systems. Manufacturers will often publish specifications for their products based on MasterFormat. Design teams may maintain office master section based on MasterFormat and pull specifications from multiple sources. MasterFormat provides the overall organizational structure that makes pulling sections from different sources possible.


MasterSpec and SpecText are specifications targeted to construction projects in the [[United States]]. NMS is targeted to construction projects in [[Canada]]. SpecsIntact is a specification processing system for preparing Unified Facilities Guide Specifications (UFGS)<ref>{{cite web |title=Unified Facilities Guide Specifications (UFGS) |url=https://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs |accessdate=18 December 2019}}</ref>. UFGS is required for design teams to use on [[United States Department of Defense]] and [[NASA]] construction projects. Using MasterFormat provides the design and construction teams a familiar organizational structure.
MasterSpec and SpecText are specifications targeted to construction projects in the [[United States]]. NMS is targeted to construction projects in [[Canada]]. SpecsIntact is a specification processing system for preparing Unified Facilities Guide Specifications (UFGS).<ref>{{cite web |title=Unified Facilities Guide Specifications (UFGS) |url=https://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs |accessdate=18 December 2019}}</ref> UFGS is required for design teams to use on [[United States Department of Defense]] and [[NASA]] construction projects. Using MasterFormat provides the design and construction teams a familiar organizational structure.


==Current Divisions (June 2018)==
==Current Divisions (August 2020)==
The current MasterFormat Divisions<ref>{{cite web |title=NMS Table of Contents |url=https://nrc.canada.ca/en/certifications-evaluations-standards/canadian-national-master-construction-specification/nms-table-contents |accessdate=20 December 2019}}</ref><ref>{{cite web |title=SpecText Table of Contents |url=https://avitru.com/wp-content/uploads/2019/10/ST-TOC-Comprehensive.pdf |accessdate=20 December 2019}}</ref> are:
The current MasterFormat Divisions<ref>{{cite web |title=NMS Table of Contents |date=25 March 2019 |url=https://nrc.canada.ca/en/certifications-evaluations-standards/canadian-national-master-construction-specification/nms-table-contents |accessdate=20 December 2019}}</ref><ref>{{cite web |title=SpecText Table of Contents |url=https://avitru.com/wp-content/uploads/2019/10/ST-TOC-Comprehensive.pdf |accessdate=20 December 2019}}</ref> are:


'''PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP'''
'''PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP'''
Line 70: Line 72:
*Division 48 &mdash; Electrical Power Generation
*Division 48 &mdash; Electrical Power Generation


==Pre-2012 Divisions==
==Pre-2020 Divisions==

'''MASTERFORMAT 2018 EDITION'''

⚫
Same as MasterFormat 2016.

'''MASTERFORMAT 2016 EDITION'''

Same as MasterFormat 2014.

'''MASTERFORMAT 2014 EDITION'''

Same as MasterFormat 2012, except the following:
⚫
*Division 40 &mdash; Process Interconnections (changed title)

'''MASTERFORMAT 2012 EDITION'''

Same as MasterFormat 2010.

'''MASTERFORMAT 2010 EDITION'''

Same as MasterFormat 2004, except the following:
*Division 46 &mdash; Water and Wastewater Equipment (added)


'''MASTERFORMAT 2004 EDITION'''
'''MASTERFORMAT 2004 EDITION'''


Changed to 50 Divisions. All divisions were revised.
⚫
Same as MasterFormat 2014, except the following:
⚫
*Division 40 &mdash; Process Integration


'''MASTERFORMAT 1995 EDITION'''
'''MASTERFORMAT 1995 EDITION'''
Line 106: Line 129:
*PageFormat<ref>{{cite web |title=SectionFormat/PageFormat |url=https://www.csiresources.org/standards/sectionformat-pageformat |accessdate=18 December 2019}}</ref> is a standard for formatting text within a section. Like MasterFormat, PageFormat is a joint publication of the [[Construction Specifications Institute]] (CSI) and [http://www.csc-dcc.ca/ Construction Specifications Canada] (CSC). It is used by [[MasterSpec]], SpecText, and NMS. Design firms often use a modified version of PageFormat. SpecsIntact does not use PageFormat.
*PageFormat<ref>{{cite web |title=SectionFormat/PageFormat |url=https://www.csiresources.org/standards/sectionformat-pageformat |accessdate=18 December 2019}}</ref> is a standard for formatting text within a section. Like MasterFormat, PageFormat is a joint publication of the [[Construction Specifications Institute]] (CSI) and [http://www.csc-dcc.ca/ Construction Specifications Canada] (CSC). It is used by [[MasterSpec]], SpecText, and NMS. Design firms often use a modified version of PageFormat. SpecsIntact does not use PageFormat.
*A relatively new strategy to classify the built environment, named OmniClass,<ref>{{cite web|title=OmniClass|url=http://www.omniclass.org/|website=OmniClass|publisher=OCCS Development Committee Secretariat|accessdate=28 May 2017}}</ref> incorporates the work results classification in its Table 22 Work Results.
*A relatively new strategy to classify the built environment, named OmniClass,<ref>{{cite web|title=OmniClass|url=http://www.omniclass.org/|website=OmniClass|publisher=OCCS Development Committee Secretariat|accessdate=28 May 2017}}</ref> incorporates the work results classification in its Table 22 Work Results.
*The [[National Building Specification]] is a British specification standard.


==References==
==References==

Latest revision as of 23:34, 20 November 2023

MasterFormat is a standard for organizing specifications and other written information for commercial and institutional building projects in the U.S. and Canada.[1] Sometimes referred to as the "Dewey Decimal System" of building construction, MasterFormat is a product of the Construction Specifications Institute (CSI) and Construction Specifications Canada (CSC). It provides a master list of Divisions, and Section numbers with associated titles within each Division, to organize information about a facility’s construction requirements and associated activities.[2]

MasterFormat is used throughout the construction industry to format specifications for construction contract documents. The purpose of this format is to assist the user in organizing information into distinct groups when creating contract documents, and to assist the user searching for specific information in consistent locations. The information contained in MasterFormat is organized in a standardized outline format within 50 Divisions (16 Divisions pre-2004). Each Division is subdivided into a number of Sections.[3]

History

[edit]

After World War II, building construction specifications began to expand, as more advanced materials and choices were made available.[4] The Construction Specifications Institute (CSI) was founded in 1948 and began to address the organization of specifications into a numbering system. In 1963, they published a format for construction specifications, with 16 major divisions of work. A 1975 CSI publication used the term MasterFormat. The last CSI MasterFormat publication to use the 16 divisions was in 1995, and this is no longer supported by CSI. In November 2004, MasterFormat expanded from 16 Divisions to 50 Divisions, reflecting innovations in the construction industry and expanding the coverage to a larger part of the construction industry.[5] Revised editions were published in 2010, 2011, 2012, 2014, 2016, 2018, and 2020.[5]

Timeline

[edit]
  • 1963: CSI introduces MasterFormat data as part of CSI Format for Construction Specifications
  • 1966: CSC produced The Building Construction Index with similar data
  • 1972: CSI and CSC merge their systems and publish as Uniform Construction Index
  • 1978: First published under the name MasterFormat
  • 1995: Extensive public review with industry users
  • 2004: Major expansion to address overcrowded divisions. Additional divisions added to include infrastructure and process equipment divisions.

Advantages

[edit]

Standardizing the presentation of such information improves communication among all parties involved in construction projects, which helps the project team deliver structures to owners according to their requirements, timelines, and budgets. The ASTM standard for sustainability assessment of building products relies on MasterFormat to organize the data.[6] MasterFormat is an organizational component of Building Systems Design - SpecLink, MasterSpec, SpecText, National Master Specification (NMS), and SpecsIntact systems. Manufacturers will often publish specifications for their products based on MasterFormat. Design teams may maintain office master section based on MasterFormat and pull specifications from multiple sources. MasterFormat provides the overall organizational structure that makes pulling sections from different sources possible.

MasterSpec and SpecText are specifications targeted to construction projects in the United States. NMS is targeted to construction projects in Canada. SpecsIntact is a specification processing system for preparing Unified Facilities Guide Specifications (UFGS).[7] UFGS is required for design teams to use on United States Department of Defense and NASA construction projects. Using MasterFormat provides the design and construction teams a familiar organizational structure.

Current Divisions (August 2020)

[edit]

The current MasterFormat Divisions[8][9] are:

PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP

  • Division 00 — Procurement and Contracting Requirements

SPECIFICATIONS GROUP

General Requirements Subgroup

  • Division 01 — General Requirements

Facility Construction Subgroup

  • Division 02 — Existing Conditions
  • Division 03 — Concrete
  • Division 04 — Masonry
  • Division 05 — Metals
  • Division 06 — Wood, Plastics, and Composites
  • Division 07 — Thermal and Moisture Protection
  • Division 08 — Openings
  • Division 09 — Finishes
  • Division 10 — Specialties
  • Division 11 — Equipment
  • Division 12 — Furnishings
  • Division 13 — Special Construction
  • Division 14 — Conveying Equipment

Facility Services Subgroup:

  • Division 21 — Fire Suppression
  • Division 22 — Plumbing
  • Division 23 — Heating, Ventilating, and Air Conditioning (HVAC)
  • Division 25 — Integrated Automation
  • Division 26 — Electrical
  • Division 27 — Communications
  • Division 28 — Electronic Safety and Security

Site and Infrastructure Subgroup:

  • Division 31 — Earthwork
  • Division 32 — Exterior Improvements
  • Division 33 — Utilities
  • Division 34 — Transportation
  • Division 35 — Waterway and Marine Construction

Process Equipment Subgroup:

  • Division 40 — Process Interconnections
  • Division 41 — Material Processing and Handling Equipment
  • Division 42 — Process Heating, Cooling, and Drying Equipment
  • Division 43 — Process Gas and Liquid Handling, Purification and Storage Equipment
  • Division 44 — Pollution and Waste Control Equipment
  • Division 45 — Industry-Specific Manufacturing Equipment
  • Division 46 — Water and Wastewater Equipment
  • Division 48 — Electrical Power Generation

Pre-2020 Divisions

[edit]

MASTERFORMAT 2018 EDITION

Same as MasterFormat 2016.

MASTERFORMAT 2016 EDITION

Same as MasterFormat 2014.

MASTERFORMAT 2014 EDITION

Same as MasterFormat 2012, except the following:

  • Division 40 — Process Interconnections (changed title)

MASTERFORMAT 2012 EDITION

Same as MasterFormat 2010.

MASTERFORMAT 2010 EDITION

Same as MasterFormat 2004, except the following:

  • Division 46 — Water and Wastewater Equipment (added)

MASTERFORMAT 2004 EDITION

Changed to 50 Divisions. All divisions were revised.

MASTERFORMAT 1995 EDITION

Same as MasterFormat 1988 except the following:

  • Division 2 — Site Construction

MASTERFORMAT 1988 EDITION

Before November 2004, MasterFormat was composed of 16 Divisions:

  • Division 1 — General Requirements
  • Division 2 — Sitework
  • Division 3 — Concrete
  • Division 4 — Masonry
  • Division 5 — Metals
  • Division 6 — Wood and Plastics
  • Division 7 — Thermal and Moisture Protection
  • Division 8 — Doors and Windows
  • Division 9 — Finishes
  • Division 10 — Specialties
  • Division 11 — Equipment
  • Division 12 — Furnishings
  • Division 13 — Special Construction
  • Division 14 — Conveying Systems
  • Division 15 — Mechanical (Ex. Plumbing and HVAC)
  • Division 16 — Electrical
[edit]
  • SectionFormat[10] is a standard for organizing information within each Section. Like MasterFormat, SectionFormat is a joint publication of the Construction Specifications Institute (CSI) and Construction Specifications Canada (CSC). It is used by MasterSpec, SpecText, NMS, and SpecsIntact systems. It is also common among manufacture specifications and design firm office masters. A Section is divided into three Parts; "Part 1 - General," "Part 2 - Products," and "Part 3 - Execution." Each Part is further organized into a system of Articles and Paragraphs. MasterFormat's Division 01 is extensively coordinated with SectionFormat's Part 1 to reduce duplication of requirements common to multiple sections.
  • PageFormat[11] is a standard for formatting text within a section. Like MasterFormat, PageFormat is a joint publication of the Construction Specifications Institute (CSI) and Construction Specifications Canada (CSC). It is used by MasterSpec, SpecText, and NMS. Design firms often use a modified version of PageFormat. SpecsIntact does not use PageFormat.
  • A relatively new strategy to classify the built environment, named OmniClass,[12] incorporates the work results classification in its Table 22 Work Results.
  • The National Building Specification is a British specification standard.

References

[edit]
  1. ^ Mowrer, F. "Development of the fire Data Management System Archived 2017-01-25 at the Wayback Machine" Department of Fire Protection and Engineering, NIST-GCR-94-693, August 1993.
  2. ^ Charette, R. and Marshall, A. "Uniformat II Elemental classification for Building Specifications, Cost Estimating, and Cost Analysis," NIST BFRL Office of applied Economics, NISTIR6389, October 1999.
  3. ^ Ross Spiegel and Dru Meadows, Green Building Materials: A Guide to Product Selection and Specification, John Wiley & Sons, Inc., New York, 1999.
  4. ^ Clendining, Warren (2009). "History of Specifications". Technical Expressions. Archived from the original on 22 March 2013. Retrieved 28 May 2017.
  5. ^ a b "What's My MasterFormat Number?". CSI. Retrieved 28 May 2017.
  6. ^ ASTM Standard E2129-05, 2005, "Standard Practice for Data Collection for Sustainability Assessment of Building Products", ASTM International, West Conshohocken, PA, 2005, doi:10.1520/E2129-05
  7. ^ "Unified Facilities Guide Specifications (UFGS)". Retrieved 18 December 2019.
  8. ^ "NMS Table of Contents". 25 March 2019. Retrieved 20 December 2019.
  9. ^ "SpecText Table of Contents" (PDF). Retrieved 20 December 2019.
  10. ^ "SectionFormat/PageFormat". Retrieved 18 December 2019.
  11. ^ "SectionFormat/PageFormat". Retrieved 18 December 2019.
  12. ^ "OmniClass". OmniClass. OCCS Development Committee Secretariat. Retrieved 28 May 2017.
[edit]
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=MasterFormat&oldid=1186105693"