Jump to content

Selective surface: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
wiki
Added free to read link in citations with OAbot #oabot
 
(42 intermediate revisions by 25 users not shown)
Line 1: Line 1:
{{Short description|Ordinary surfaces re-radiate heat they absorb. Selective ones re-radiate only a little.}}
In [[solar thermal collector]]s, a '''selective surface''' or '''selective absorber''' is a means of increasing its operation temperature and/or efficiency. The selectivity is defined as the [[ratio]] of [[solar radiation]]-[[absorption (electromagnetic radiation)|absorption]] (''alpha'') - to [[thermal infrared]] radiation-[[Emission (electromagnetic radiation)|emission]] (''epsilon'').
{{More citations needed|date=July 2014}}
[[Image:Col·lectors solars de tub de buit.JPG|right|thumb|Solar thermal collector system based on evacuated glass tubes. Sunlight is absorbed by a special material at the center of each tube that has a selective surface. The surface absorbs sunlight nearly completely, and emits very little of the solar heat as thermal radiation. Ordinary black surfaces are also efficient absorbers, but they emit thermal radiation copiously.]]


In [[solar thermal collector]]s, a '''selective surface''' or '''selective [[Absorption (electromagnetic radiation)|absorber]]''' is a means of increasing its operation temperature and/or efficiency. The selectivity is defined as the [[ratio]] of [[solar radiation]] [[absorption (electromagnetic radiation)|absorption]] (α<sub>sol</sub>) to [[thermal infrared radiation]] [[emission (electromagnetic radiation)|emission]] (ε<sub>therm</sub>).
<!-- Materials that exhibit this combination of characteristics do not, however, exist in nature. -->Selective surfaces take advantage of the differing wavelengths of incident solar radiation and the emissive radiation from the absorbing surface:
* Solar radiation covers approximately the wavelengths 350&nbsp;nm...4.000&nbsp;nm; [[UV-A]], [[Visible light|visible]] and [[near infrared]]&nbsp;([[Near infrared|NIR]] - or [[IR-A]] plus [[IR-B]])).
* Thermal infrared radiation covers approximately the wavelengths 4.000&nbsp;nm...40.000&nbsp;nm =&nbsp;4&nbsp;um...40&nbsp;um; The thermal infrared radiation interval being named or covered by: [[Mid-infrared|MIR]], [[LWIR]] or [[IR-C]]..


<!-- Materials that exhibit this combination of characteristics do not, however, exist in nature. -->Selective surfaces take advantage of the differing wavelengths of incident solar radiation and the emissive radiation from the absorbing surface:<ref>{{Cite web|last=|first=|date=|title=Absorbing Surfaces|url=https://www.impact-absorbing-surfaces.co.uk/|archive-url=|archive-date=|access-date=2020-11-26|website=www.impact-absorbing-surfaces.co.uk}}</ref>
Normally, a combination of materials is used. One of the first selective surfaces investigated was simply [[copper]] with a layer of black [[cupric oxide]]. [[Black]] [[chromium]] ("black chrome") [[nickel]]-plated [[copper]] is another selective surface that is very durable, highly resistant to [[humidity]] or [[oxidizing]] atmospheres and extreme [[temperature]]s while being able to retain its selective properties - but expensive. Another combination consists of [[steel]] plated with [[gold]], [[silicon]], and [[silicon dioxide]].
* Solar radiation covers approximately the wavelengths 350&nbsp;nm to 4000&nbsp;nm; [[UV-A]], [[Visible light|visible]] and [[near infrared]]&nbsp;([[Near infrared|NIR]], or [[IR-A]] plus [[IR-B]]).
* Thermal [[infrared radiation]], from materials with temperatures approximately in the interval -40 to 100&nbsp;°C, covers approximately the wavelengths 4000&nbsp;nm to 40,000&nbsp;nm =&nbsp;4&nbsp;um to 40&nbsp;um; The thermal infrared radiation interval being named or covered by: [[Mid-infrared|MIR]], [[LWIR]] or [[IR-C]].


== Materials ==
Although ordinary black paint has high solar absorption, it also has high thermal emissivity, and thus its selectivity is low. So it is not considered to be a true "selective surface".
Normally, a combination of materials is used. One of the first selective surfaces investigated was a semiconductor-metal tandem<ref name=":0">{{Cite web|url=https://www.nrel.gov/docs/fy02osti/31267.pdf|title=Review of Mid- to High-Temperature Solar Selective Absorber Materials|last=Kennedy|first=Cheryl|date=2002|website=NREL|accessdate=21 February 2018}}</ref> – simply [[copper]] with a layer of black [[cupric oxide]]. Silicon on metal is also another example.<ref name=":0" /> A different design has ceramic–metal composites ([[cermet]]s) on metal substrates.<ref name=":0" /><ref>{{Cite journal|last1=Tesfamichael|first1=Tuquabo|last2=Wäckelgård|first2=Ewa|date=1999-07-01|title=Angular solar absorptance of absorbers used in solar thermal collectors|url=https://www.osapublishing.org/abstract.cfm?uri=ao-38-19-4189|journal=Applied Optics|language=EN|volume=38|issue=19|pages=4189–4197|doi=10.1364/AO.38.004189|pmid=18323901 |issn=2155-3165|bibcode=1999ApOpt..38.4189T|url-access=subscription}}</ref> [[Black]] [[chromium]] ("black chrome") and [[nickel]]-plated anodized aluminum is another selective surface that is very durable, highly resistant to [[humidity]] or [[oxidizing]] atmospheres and extreme [[temperature]]s, while being able to retain its selective properties, but expensive. One of the more popular designs – a multi-layer broadband solar absorber – consists of a metal substrate coated with multiple layers of metal and dielectric materials. While those have to be vacuum-deposited, they have been widely adopted due to their suitability for vacuum tubes.<ref>{{Cite web|url=http://www.almecogroup.com/en/pagina/53-tinox-energy-cu|title=TiNOX energy|last=|first=|date=2018|website=Alemco|accessdate=21 February 2018}}</ref><ref name=":0" /><ref>[https://supergreensolutions.com Renewable Clean Energy], 23 January 2023</ref>


Although ordinary black paint has high solar absorption, it also has high thermal emissivity, and thus it is not a selective surface.
Typical values for a selective surface might be 0.90 solar absorption and 0.10 thermal emissivity. but can range from 0.8/0.3 for paints on metal to 0.96/0.05 for commercial surfaces - and thermal emissivities as low as 0.02 have been obtained in laboratories.

Typical values for a selective surface might be 0.90 solar absorption and 0.10 thermal emissivity, but can range from 0.8/0.3 for paints on metal to 0.96/0.05 for commercial surfaces. Thermal emissivities as low as 0.02 have been obtained in laboratories.<ref name=":0" />

== Other applications ==
Selective surfaces are used for other applications than solar thermal collectors, such as [[low emissivity]] surfaces used in [[Window#Glazing and filling|window]] glasses, which reflect thermal radiation and have high [[transmittance]] factors (being [[Transparency and translucency|transparent]]) for [[visible light|visible sunlight]].


==See also==
==See also==
*[[Insulated glazing]]
*[[Insulated glazing]]
*[[Solar box cooker]]
*[[Solar cooker]]
*[[Solar collector]]
*[[Solar oven]]
*[[Solar power]]
*[[Solar power]]
*[[Solar thermal collector]]
*[[Trombe wall]]
*[[Trombe wall]]

==References==
{{reflist}}


==External links==
==External links==
*[http://web.archive.org/web/20110616122534/www.bcas.net/Publication/EnergyNewsletter/Document/2003-5.PDF Selective Surface for efficient Solar Thermal Conversion]
*[https://web.archive.org/web/20110616122534/http://www.bcas.net/Publication/EnergyNewsletter/Document/2003-5.PDF Selective Surface for efficient Solar Thermal Conversion]
*[http://www.redrok.com/concept.htm#absorptivity Table of absorption and emissivity for various materials]
*[http://www.redrok.com/concept.htm#absorptivity Table of absorption and emissivity for various materials]



Latest revision as of 08:53, 31 December 2023

Solar thermal collector system based on evacuated glass tubes. Sunlight is absorbed by a special material at the center of each tube that has a selective surface. The surface absorbs sunlight nearly completely, and emits very little of the solar heat as thermal radiation. Ordinary black surfaces are also efficient absorbers, but they emit thermal radiation copiously.

In solar thermal collectors, a selective surface or selective absorber is a means of increasing its operation temperature and/or efficiency. The selectivity is defined as the ratio of solar radiation absorptionsol) to thermal infrared radiation emissiontherm).

Selective surfaces take advantage of the differing wavelengths of incident solar radiation and the emissive radiation from the absorbing surface:[1]

  • Solar radiation covers approximately the wavelengths 350 nm to 4000 nm; UV-A, visible and near infrared (NIR, or IR-A plus IR-B).
  • Thermal infrared radiation, from materials with temperatures approximately in the interval -40 to 100 °C, covers approximately the wavelengths 4000 nm to 40,000 nm = 4 um to 40 um; The thermal infrared radiation interval being named or covered by: MIR, LWIR or IR-C.

Materials

[edit]

Normally, a combination of materials is used. One of the first selective surfaces investigated was a semiconductor-metal tandem[2] – simply copper with a layer of black cupric oxide. Silicon on metal is also another example.[2] A different design has ceramic–metal composites (cermets) on metal substrates.[2][3] Black chromium ("black chrome") and nickel-plated anodized aluminum is another selective surface that is very durable, highly resistant to humidity or oxidizing atmospheres and extreme temperatures, while being able to retain its selective properties, but expensive. One of the more popular designs – a multi-layer broadband solar absorber – consists of a metal substrate coated with multiple layers of metal and dielectric materials. While those have to be vacuum-deposited, they have been widely adopted due to their suitability for vacuum tubes.[4][2][5]

Although ordinary black paint has high solar absorption, it also has high thermal emissivity, and thus it is not a selective surface.

Typical values for a selective surface might be 0.90 solar absorption and 0.10 thermal emissivity, but can range from 0.8/0.3 for paints on metal to 0.96/0.05 for commercial surfaces. Thermal emissivities as low as 0.02 have been obtained in laboratories.[2]

Other applications

[edit]

Selective surfaces are used for other applications than solar thermal collectors, such as low emissivity surfaces used in window glasses, which reflect thermal radiation and have high transmittance factors (being transparent) for visible sunlight.

See also

[edit]

References

[edit]
  1. ^ "Absorbing Surfaces". www.impact-absorbing-surfaces.co.uk. Retrieved 2020-11-26.
  2. ^ a b c d e Kennedy, Cheryl (2002). "Review of Mid- to High-Temperature Solar Selective Absorber Materials" (PDF). NREL. Retrieved 21 February 2018.
  3. ^ Tesfamichael, Tuquabo; Wäckelgård, Ewa (1999-07-01). "Angular solar absorptance of absorbers used in solar thermal collectors". Applied Optics. 38 (19): 4189–4197. Bibcode:1999ApOpt..38.4189T. doi:10.1364/AO.38.004189. ISSN 2155-3165. PMID 18323901.
  4. ^ "TiNOX energy". Alemco. 2018. Retrieved 21 February 2018.
  5. ^ Renewable Clean Energy, 23 January 2023
[edit]