Fuel polishing: Difference between revisions
Content deleted Content added
m Grammar adjustments |
removed section which this applied to |
||
| (26 intermediate revisions by 12 users not shown) | |||
| Line 1: | Line 1: | ||
{{Short description|Cleaning process of stored oil and hydrocarbon fuel}} |
|||
{{multiple issues| |
|||
{{ |
{{Refimprove|date=May 2015}} |
||
{{Orphan|date=May 2015}} |
|||
{{Refimprove|date=May 2015}}}} |
|||
'''Fuel polishing''' is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage. |
'''Fuel polishing''' is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage. It is essentially the removal of water, sediment and [[microbial contamination of diesel fuel|microbial contamination]] from such fuels as [[Diesel fuel|diesel]], [[red diesel]] and [[biodiesel]]. This fuel contamination, also known as 'fuel bugs', or 'diesel bugs', or 'so-called algae' build up over time in stored fuels if they aren't tested and treated on a regular basis. Fuel analysis should be undertaken before fuel polishing is commenced so that the exact contamination problem can be rectified with a targeted solution. A second fuel test should be performed after the fuel polishing has been completed to confirm the problem has been fixed. |
||
[[File:Diesel Contamination.jpg|thumb|]] |
[[File:Diesel Contamination.jpg|thumb|]] |
||
==Sources of contamination== |
==Sources of contamination== |
||
<ref>https://www.fuelscreeningaustralia.com.au/blogs/news/stored-fuel-for-back-up-generators</ref>Diesel Fuel will become contaminated by 3 main types of contaminates |
|||
* '''Water''' |
* '''Water''' |
||
| Line 14: | Line 12: | ||
** Emulsified Water |
** Emulsified Water |
||
** Free Water |
** Free Water |
||
* '''Microbial Growth''' (AKA Diesel Bug) |
* [[Microbial contamination of diesel fuel|'''Microbial Growth''' (AKA Diesel Bug)]] |
||
** Bacteria |
** Bacteria |
||
** Yeast |
** Yeast |
||
| Line 31: | Line 29: | ||
These types of contamination can be introduced from many different sources throughout the supply chain of the diesel fuel as well as within the storage tank itself. Any one of these contaminants can cause complete engine failure. |
These types of contamination can be introduced from many different sources throughout the supply chain of the diesel fuel as well as within the storage tank itself. Any one of these contaminants can cause complete engine failure. |
||
In April 2010, [[Cathay Pacific Flight 780]], an aircraft carrying over 300 passengers, had a close call when fuel contaminated with spherical particles damaged the aircraft's engines, resulting in 57 passenger injuries as the pilots had to land the aircraft at twice the normal landing speed.<ref>[[ |
In April 2010, [[Cathay Pacific Flight 780]], an aircraft carrying over 300 passengers, had a close call when fuel contaminated with spherical particles damaged the aircraft's engines, resulting in 57 passenger injuries as the pilots had to land the aircraft at twice the normal landing speed.<ref>{{cite web |last=Ranter |first=Harro |url=https://news.aviation-safety.net/2013/09/17/report-contaminated-fuel-causes-a330-engine-problems-and-emergency-landing-at-hong-kong/ |title=Report: contaminated fuel causes A330 engine control problems and emergency landing at Hong Kong |work=[[Aviation Safety Network]] |date=17 September 2013 |access-date=2 April 2021 |archive-date=21 April 2021 |archive-url=https://web.archive.org/web/20210421025720/https://news.aviation-safety.net/2013/09/17/report-contaminated-fuel-causes-a330-engine-problems-and-emergency-landing-at-hong-kong/ |url-status=live }}</ref> |
||
== Symptoms of 'diesel bugs' == |
== Symptoms of 'diesel bugs' == |
||
| Line 49: | Line 47: | ||
* '''Dissolved''' - Dissolved water in oil is the presence of water but, unnoticeable to the eye. The water continues to develop until saturation point where water visibility begins. |
* '''Dissolved''' - Dissolved water in oil is the presence of water but, unnoticeable to the eye. The water continues to develop until saturation point where water visibility begins. |
||
* '''Emulsified''' - At the point of saturation, a cloudy appearance will be the tell-tale sign that the water/oil mixture has become emulsified. |
* '''Emulsified''' - At the point of saturation, a cloudy appearance will be the tell-tale sign that the water/oil mixture has become emulsified. |
||
* '''Free''' - The most developed stage of fuel contamination is when free |
* '''Free''' - The most developed stage of fuel contamination is when free-flowing puddles of water appear within stored oil. At this point, bacterial contamination and growth is boosted. |
||
== Microbial contamination == |
== Microbial contamination == |
||
The contaminants found in fuel can be made up of a number of |
The contaminants found in fuel can be made up of a number of organisms, predominantly ''[[Hormoconis resinae]]'', which is typically the main contaminant when microbial contamination is present, along with bacteria ''[[Pseudomonas aeruginosa]]'', and fungi such as yeasts and moulds like ''[[Yarrowia tropicalis]]''.<ref>{{cite web|url=http://msdssearch.dow.com/PublishedLiteratureDOWCOM/dh_053e/0901b8038053e609.pdf?filepath=microbial/pdfs/noreg/253-02788.pdf&fromPage=GetDoc |format=PDF |title=Correct Biocide Dosing is Critical for Effective Protection of Fuels |publisher=Msdresearch.dow.com |accessdate=2015-05-22}}</ref> |
||
[[File:Diesel Bug.jpg|thumb|Diesel bug (microbial infections) can and often has the appearance of sludge. To the layman this could simply be dirt and sand, but is in fact a living organism. This sample was incubated over three months in a 1-litre jar of clean diesel.]] |
[[File:Diesel Bug.jpg|thumb|Diesel bug (microbial infections) can and often has the appearance of sludge. To the layman this could simply be dirt and sand, but is in fact a living organism. This sample was incubated over three months in a 1-litre jar of clean diesel.]] |
||
[[File:Mobile Fuel Polisher 50 lpm - 5 micron.jpg|alt=Mobile Fuel Polisher|thumb|Mobile Fuel Polisher 50 litres per minute & 5 micron filtration]] |
|||
==See also== |
|||
==Fuel polishing process== |
|||
*[[Particle counter]] |
|||
{{unreferenced|section|date=October 2017}} |
|||
In essence "polishing" is an advanced level filtration of the fuel, monitored and controlled via a central processing unit. Its application ensures the need for fuel additives is either massively reduced or totally removed. A typical process involves a single pass of the fuel through different apparatus, removing increasingly finer contaminant in each stage. The application of different filter technologies is vital; a single process is not sufficient to extract the different forms of water and matter found in fuel. |
|||
<gallery> |
|||
File:W-PFS-010-W-220vac 2014 small.png|Typical advanced fuel polishing system (W-PFS) |
|||
File:50 litre per minute Fuel Polishing System at a UK NHS Hospital.jpg|This 50 litre per minute fuel polishing system is fitted to a 10,000 litre holding tank of diesel fuel at a UK Hospital. |
|||
File:600 litre per minute Fuel Polishing Station.jpg|600 litre per minute Fuel Polishing System |
|||
</gallery> |
|||
During the fuel polishing process, multiple stages are required to effectively remove the solid particulates, wet foreign matter and water from the fuel. This multi-stage process ensures the high efficiency of the process; however, ensuring dense matter removal first is key, as is the removal of large matter on the suction side of the internal pumping stage. High pressurization of fuel contamination is notoriously dangerous and as such the majority of the polishing process should be carried out on the suction side. The pressure side process is often referred to as the final or finishing stage, where 2 micron particulate<ref>{{Cite web|title = W-PFS Range Systems|url = http://www.wasp-pfs.com/products/w-pfs|website = www.wasp-pfs.com|access-date = 2016-02-04}}</ref> is removed and the fuel's final water content is extracted to within the efficiency of the filter stages. |
|||
The amount of time required to complete the fuel polishing process depends on several factors. One of the most important is the specific fuel polishing machine used. Fuel cleaning machines can polish at rates from 8 litres per minute to upwards of 400 litres per minute, however the factors which govern the process are about more than just flow rate. In fact a high flow rate can be detrimental to the overall effect due to increased pressures in the filter stages and adverse disturbance in the fuel tank. Another factor can be the quality of the fuel. If the fuel is highly contaminated it will typically take longer to clean than a batch of cleaner fuel of the same volume. The third factor to take into account is the volume of fuel to be processed. It may seem obvious but the larger the volume of fuel that requires polishing, the longer it will take to complete the cleaning process. |
|||
{{cite web |url=http://www.filtersolutions.co.uk/fuel-polishing |title=Manufacturers of Fuel Polishing Systems since 2005 |website=Filter Solutions Ltd |access-date=23 May 2018}} |
|||
<ref>{{Cite web | url=http://www.filtersolutions.co.uk/diesel-fuel-polishing/ | title=Manufacturers of Diesel Fuel Polishing Systems since 2005 Filter Solutions | Experts in Oil and Fuel Purification}}</ref> |
|||
<ref>{{Cite web | url=https://www.mycleanfuel.com/category-s/199.htm |title = Principles of Fuel Filtration}}</ref> |
|||
==References== |
==References== |
||
| Line 81: | Line 65: | ||
[[Category:Petroleum products]] |
[[Category:Petroleum products]] |
||
[[Category:Filtration]] |
[[Category:Filtration]] |
||
[[Category:Diesel]] |
[[Category:Diesel fuel]] |
||
Latest revision as of 16:07, 12 March 2024
 | This article needs additional citations for verification. (May 2015) |
Fuel polishing is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage. It is essentially the removal of water, sediment and microbial contamination from such fuels as diesel, red diesel and biodiesel. This fuel contamination, also known as 'fuel bugs', or 'diesel bugs', or 'so-called algae' build up over time in stored fuels if they aren't tested and treated on a regular basis. Fuel analysis should be undertaken before fuel polishing is commenced so that the exact contamination problem can be rectified with a targeted solution. A second fuel test should be performed after the fuel polishing has been completed to confirm the problem has been fixed.
Sources of contamination
[edit]- Water
- Dissolved Water
- Emulsified Water
- Free Water
- Microbial Growth (AKA Diesel Bug)
- Bacteria
- Yeast
- Mold
- Bio-films
- Solid Particle Contamination
- Rust
- Dirt
- Gums
- Wax
- Soot
- Organic Compounds
Any and all of these contaminants will eventually lead to break downs or engine failure.
These types of contamination can be introduced from many different sources throughout the supply chain of the diesel fuel as well as within the storage tank itself. Any one of these contaminants can cause complete engine failure.
In April 2010, Cathay Pacific Flight 780, an aircraft carrying over 300 passengers, had a close call when fuel contaminated with spherical particles damaged the aircraft's engines, resulting in 57 passenger injuries as the pilots had to land the aircraft at twice the normal landing speed.[1]
Symptoms of 'diesel bugs'
[edit]The symptoms of diesel bugs are easy to find. Important things to check over and look out for are:
- Blocked Filters
- Fuel System Failure
- Worn Fuel Injectors
- Corroded Tanks
- Engine Failure
Microbial contamination is significantly accelerated when higher biodiesel content occurs along with lower sulphur content.
Water in oil
[edit]Almost everything on Earth contains elements of water; oil and fuel are no exceptions. While very small amounts exist in fuels to start with, stored fuel will become a breeding ground for the microbial bacteria and over time, the levels of damage change from dissolved to emulsified and finally free.
- Dissolved - Dissolved water in oil is the presence of water but, unnoticeable to the eye. The water continues to develop until saturation point where water visibility begins.
- Emulsified - At the point of saturation, a cloudy appearance will be the tell-tale sign that the water/oil mixture has become emulsified.
- Free - The most developed stage of fuel contamination is when free-flowing puddles of water appear within stored oil. At this point, bacterial contamination and growth is boosted.
Microbial contamination
[edit]The contaminants found in fuel can be made up of a number of organisms, predominantly Hormoconis resinae, which is typically the main contaminant when microbial contamination is present, along with bacteria Pseudomonas aeruginosa, and fungi such as yeasts and moulds like Yarrowia tropicalis.[2]
See also
[edit]References
[edit]- ^ Ranter, Harro (17 September 2013). "Report: contaminated fuel causes A330 engine control problems and emergency landing at Hong Kong". Aviation Safety Network. Archived from the original on 21 April 2021. Retrieved 2 April 2021.
- ^ "Correct Biocide Dosing is Critical for Effective Protection of Fuels" (PDF). Msdresearch.dow.com. Retrieved 2015-05-22.