Standard atmosphere (unit): Difference between revisions
Content deleted Content added
Citation for 1 atm at sea level |
m →Pressure units and equivalencies: Avoid bad line breaks |
||
| (34 intermediate revisions by 17 users not shown) | |||
| Line 18: | Line 18: | ||
| inunits3 = {{convert|1|atm|bar|sigfig=7|disp=out}} |
| inunits3 = {{convert|1|atm|bar|sigfig=7|disp=out}} |
||
}} |
}} |
||
[[File:Wohnzimmerbarometer.jpg | thumb | 220x124px | right | Aneroid barometer for household use from {{Circa|1925}}]] |
|||
The '''standard atmosphere''' (symbol: '''atm''') is a [[measurement unit|unit]] of [[pressure]] defined as {{val|101325}} [[pascal (unit)|Pa]]. It is sometimes used as a ''reference pressure'' or ''standard pressure''. It is approximately equal to [[Earth]]'s average [[atmospheric pressure]] at [[sea level]]<ref>{{Cite web |title=Water Pressures at Ocean Depths |url=https://www.pmel.noaa.gov/eoi/nemo1998/education/pressure.html |access-date=11 October 2022 |website=NOAA Pacific Marine Environmental Laboratory}}</ref> |
The '''standard atmosphere''' (symbol: '''atm''') is a [[measurement unit|unit]] of [[pressure]] defined as {{val|101325}} [[pascal (unit)|Pa]]. It is sometimes used as a ''reference pressure'' or ''standard pressure''. It is approximately equal to [[Earth]]'s average [[atmospheric pressure]] at [[sea level]].<ref>{{Cite web |title=Water Pressures at Ocean Depths |url=https://www.pmel.noaa.gov/eoi/nemo1998/education/pressure.html |access-date=11 October 2022 |website=NOAA Pacific Marine Environmental Laboratory}}</ref> |
||
==History== |
==History== |
||
The standard atmosphere was originally defined as the pressure exerted by 760 mm of [[Mercury (element)|mercury]] at {{Convert|0|C|F|abbr=|sp=us}} and standard gravity (''g''<sub>n</sub> = {{val|9.80665|u=m/s2}}).<ref name=Resnick>{{cite book |last1=Resnick |first1=Robert |last2=Halliday |first2=David |date=1960 |title=Physics for Students of Science and Engineering Part 1 |location=New York |publisher=Wiley |page=364 }}</ref> It was used as a reference condition for physical and chemical properties, and |
The standard atmosphere was originally defined as the pressure exerted by a 760 mm column of [[Mercury (element)|mercury]] at {{Convert|0|C|F|abbr=|sp=us}} and standard gravity (''g''<sub>n</sub> = {{val|9.80665|u=m/s2}}).<ref name=Resnick>{{cite book |last1=Resnick |first1=Robert |last2=Halliday |first2=David |date=1960 |title=Physics for Students of Science and Engineering Part 1 |location=New York |publisher=Wiley |page=364 }}</ref> It was used as a reference condition for physical and chemical properties, and the definition of the [[Celsius|centigrade]] temperature scale set 100 °C as the boiling point of water at this pressure. In 1954, the 10th [[General Conference on Weights and Measures]] (CGPM) adopted ''standard atmosphere'' for general use and affirmed its definition of being precisely equal to {{val|1013250}} [[dyne]]s per [[square centimetre]] ({{val|101325|ul=Pa}})<!-- {{convert|1,013,250|dyn/cm2|Pa|lk=on}} -->.<ref name=BIPM>{{Cite web|url=https://www.bipm.org/en/committees/cg/cgpm/10-1954/resolution-4|title=BIPM - Resolution 4 of the 10th CGPM|website=www.bipm.org}}</ref> This defined pressure in a way that is independent of the properties of any particular substance. In addition, the CGPM noted that there had been some misapprehension that the previous definition (from the 9th CGPM) "led some physicists to believe that this definition of the standard atmosphere was valid only for accurate work in [[thermometry]]."<ref name=BIPM/> |
||
In [[chemistry]] and in various industries, the reference pressure referred to in ''[[standard temperature and pressure]]'' was commonly {{convert|101.325|kPa|atm|0|abbr=on|order=flip}} but standards have since diverged; in 1982, the [[International Union of Pure and Applied Chemistry]] recommended that for the purposes of specifying the physical properties of substances, ''standard pressure'' should be precisely {{convert|100|kPa|bar|0|abbr=on|lk=on}}.<ref>IUPAC.org, Gold Book, ''[http://goldbook.iupac.org/S05921.html Standard Pressure]''</ref> |
In [[chemistry]] and in various industries, the reference pressure referred to in ''[[standard temperature and pressure]]'' was commonly {{convert|101.325|kPa|atm|0|abbr=on|order=flip}} prior to 1982, but standards have since diverged; in 1982, the [[International Union of Pure and Applied Chemistry]] recommended that for the purposes of specifying the physical properties of substances, ''standard pressure'' should be precisely {{convert|100|kPa|bar|0|abbr=on|lk=on}}.<ref>IUPAC.org, Gold Book, ''[http://goldbook.iupac.org/S05921.html Standard Pressure]''</ref> |
||
==Pressure units and equivalencies == |
==Pressure units and equivalencies == |
||
| Line 31: | Line 32: | ||
A pressure of 1 atm can also be stated as: |
A pressure of 1 atm can also be stated as: |
||
:≡ {{val|101325}} [[Pascal (unit)|pascals]] (Pa) |
|||
:≡ {{val|1.01325}} [[bar (unit)|bar]] |
|||
:≈ {{val|1.033}} [[Kilogram-force|kgf]]/cm<sup>2</sup> |
:≈ {{val|1.033}} [[Kilogram-force|kgf]]/cm<sup>2</sup> |
||
:≈ {{val|10.33}} [[Centimetre of water|m H<sub>2</sub>O]]<ref name="H2O">As a unit of measurement, the conventional metre of water (mH<sub>2</sub>O) is defined as an ideal column of water with density of 1000 kg/m<sup>3</sup> under standard gravity g<sub>n</sub> of 9.80665 m/s<sup>2</sup> i.e. 1 m × 1000 kg/m<sup>3</sup> × 9.80665 m/s<sup>2</sup> = 9806.65 Pa (though in practice the density of pure water is always less). 1 cmH<sub>2</sub>O = 0.01 mH<sub>2</sub>O and 1 inH<sub>2</sub>O = 0.0254 mH<sub>2</sub>O. {{Cite book |title=BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors |publisher=British Standards Institution |year=1974 |page=49}}</ref> |
|||
:≈ {{val|1.033}} [[technical atmosphere]] |
|||
:≈ {{val|760}} [[millimetre of mercury|mmHg]]<ref name="Hg">As a unit of measurement, the conventional millimetre of mercury (mmHg) is defined as an ideal column of mercury with density of {{val|13595.1|u=kg/m<sup>3</sup>}} under standard gravity g<sub>n</sub> of 9.80665 m/s<sup>2</sup> i.e. 0.001 m × {{val|13595.1|u=kg/m<sup>3</sup>}} × 9.80665 m/s<sup>2</sup> ≈ 133.322 Pa. 1 inHg = 25.4 mmHg. {{Cite book |title=BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors |publisher=British Standards Institution |year=1974 |page=49}}</ref> |
|||
:≈ {{val|10.33}} [[Centimetre of water|m H<sub>2</sub>O]], 4 °C<ref group="n" name="n2">This is the customarily accepted value for cm–H<sub>2</sub>O, 4 °C. It is precisely the product of 1 kg-force per square centimeter (one technical atmosphere) times 1.013 25 (bar/atmosphere) divided by 0.980 665 (one gram-force). It is not accepted practice to define the value for water column based on a true physical realization of water (which would be 99.997 495% of this value because the true maximum density of [[Vienna Standard Mean Ocean Water]] is 0.999 974 95 kg/L at 3.984 °C). Also, this "physical realization" would ''still'' ignore the 8.285 cm–H<sub>2</sub>O reduction that would actually occur in a true physical realization due to the vapor pressure over water at 3.984 °C.</ref> |
|||
: |
|||
:≈ {{val| |
:≈ {{val|29.92}} [[inch of mercury|inHg]]<ref name="Hg" /> |
||
| ⚫ | |||
:≡ {{val|760}} [[torr]] (Torr)<ref group="n">Torr and mm-Hg, 0°C are often taken to be identical. For most practical purposes (to 5 significant digits), they are interchangeable.</ref> |
|||
:≈ {{val|29.92}} [[inch of mercury|inHg]], 0 °C, subject to revision as more precise measurements of mercury's density become available<ref group="n" name="n3">[[NIST]] value of 13.595 078(5) g/mL assumed for the density of Hg at 0 °C</ref> |
|||
| ⚫ | |||
:≈ {{val|14.6959}} [[pounds per square inch|pounds-force per square inch]] (lbf/in<sup>2</sup>) |
|||
:≈ {{val|2116.22}} [[pounds per square foot|pounds-force per square foot]] (lbf/ft<sup>2</sup>) |
:≈ {{val|2116.22}} [[pounds per square foot|pounds-force per square foot]] (lbf/ft<sup>2</sup>) |
||
:= 1 ata (atmosphere absolute). |
|||
| ⚫ | The '''ata''' |
||
| ⚫ | The notation '''ata''' has been used to indicate an [[absolute pressure]] measured in either standard atmospheres (atm)<ref>{{cite web |website=Scuba Diving & Other Fun Activities |url=http://scubadoobydoo.blogspot.com.br/2008/03/difference-between-atm-ata.html |title=The Difference Between An ATM & An ATA |date=March 2, 2008}}</ref>{{better source needed|reason=blog entry posted by "Anonymous"|date=October 2024}} or [[technical atmosphere]]s (at).<ref>{{Cite book |title=BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors |publisher=British Standards Institution |year=1974 |page=50}}</ref> |
||
==Notes== |
|||
<references group="n"/> |
|||
==See also== |
==See also== |
||
*[[Standard conditions for temperature and pressure]] |
|||
*[[Atmospheric pressure]] |
|||
*[[International Standard Atmosphere]] |
*[[International Standard Atmosphere]] |
||
| Line 62: | Line 51: | ||
[[Category:Units of pressure]] |
[[Category:Units of pressure]] |
||
[[Category: |
[[Category:Atmospheric pressure]] |
||
Latest revision as of 19:31, 10 October 2024
| Atmosphere | |
|---|---|
| Unit of | Pressure |
| Symbol | atm |
| Conversions | |
| 1 atm in ... | ... is equal to ... |
| SI units | 101.325 kPa |
| US customary units | 14.69595 psi |
| other metric units | 1.013250 bar |
The standard atmosphere (symbol: atm) is a unit of pressure defined as 101325 Pa. It is sometimes used as a reference pressure or standard pressure. It is approximately equal to Earth's average atmospheric pressure at sea level.[1]
History
[edit]The standard atmosphere was originally defined as the pressure exerted by a 760 mm column of mercury at 0 °C (32 °F) and standard gravity (gn = 9.80665 m/s2).[2] It was used as a reference condition for physical and chemical properties, and the definition of the centigrade temperature scale set 100 °C as the boiling point of water at this pressure. In 1954, the 10th General Conference on Weights and Measures (CGPM) adopted standard atmosphere for general use and affirmed its definition of being precisely equal to 1013250 dynes per square centimetre (101325 Pa).[3] This defined pressure in a way that is independent of the properties of any particular substance. In addition, the CGPM noted that there had been some misapprehension that the previous definition (from the 9th CGPM) "led some physicists to believe that this definition of the standard atmosphere was valid only for accurate work in thermometry."[3]
In chemistry and in various industries, the reference pressure referred to in standard temperature and pressure was commonly 1 atm (101.325 kPa) prior to 1982, but standards have since diverged; in 1982, the International Union of Pure and Applied Chemistry recommended that for the purposes of specifying the physical properties of substances, standard pressure should be precisely 100 kPa (1 bar).[4]
Pressure units and equivalencies
[edit]| Pascal | Bar | Technical atmosphere | Standard atmosphere | Torr | Pound per square inch | |
|---|---|---|---|---|---|---|
| (Pa) | (bar) | (at) | (atm) | (Torr) | (lbf/in2) | |
| 1 Pa | — | 1 Pa = 10−5 bar | 1 Pa = 1.0197×10−5 at | 1 Pa = 9.8692×10−6 atm | 1 Pa = 7.5006×10−3 Torr | 1 Pa = 0.000145037737730 lbf/in2 |
| 1 bar | 105 | — | = 1.0197 | = 0.98692 | = 750.06 | = 14.503773773022 |
| 1 at | 98066.5 | 0.980665 | — | 0.9678411053541 | 735.5592401 | 14.2233433071203 |
| 1 atm | ≡ 101325 | ≡ 1.01325 | 1.0332 | — | 760 | 14.6959487755142 |
| 1 Torr | 133.322368421 | 0.001333224 | 0.00135951 | 1/760 ≈ 0.001315789 | — | 0.019336775 |
| 1 lbf/in2 | 6894.757293168 | 0.068947573 | 0.070306958 | 0.068045964 | 51.714932572 | — |
A pressure of 1 atm can also be stated as:
- ≈ 1.033 kgf/cm2
- ≈ 10.33 m H2O[5]
- ≈ 760 mmHg[6]
- ≈ 29.92 inHg[6]
- ≈ 406.782 in H2O[5]
- ≈ 2116.22 pounds-force per square foot (lbf/ft2)
The notation ata has been used to indicate an absolute pressure measured in either standard atmospheres (atm)[7][better source needed] or technical atmospheres (at).[8]
See also
[edit]References
[edit]- ^ "Water Pressures at Ocean Depths". NOAA Pacific Marine Environmental Laboratory. Retrieved 11 October 2022.
- ^ Resnick, Robert; Halliday, David (1960). Physics for Students of Science and Engineering Part 1. New York: Wiley. p. 364.
- ^ a b "BIPM - Resolution 4 of the 10th CGPM". www.bipm.org.
- ^ IUPAC.org, Gold Book, Standard Pressure
- ^ a b As a unit of measurement, the conventional metre of water (mH2O) is defined as an ideal column of water with density of 1000 kg/m3 under standard gravity gn of 9.80665 m/s2 i.e. 1 m × 1000 kg/m3 × 9.80665 m/s2 = 9806.65 Pa (though in practice the density of pure water is always less). 1 cmH2O = 0.01 mH2O and 1 inH2O = 0.0254 mH2O. BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 49.
- ^ a b As a unit of measurement, the conventional millimetre of mercury (mmHg) is defined as an ideal column of mercury with density of 13595.1 kg/m3 under standard gravity gn of 9.80665 m/s2 i.e. 0.001 m × 13595.1 kg/m3 × 9.80665 m/s2 ≈ 133.322 Pa. 1 inHg = 25.4 mmHg. BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 49.
- ^ "The Difference Between An ATM & An ATA". Scuba Diving & Other Fun Activities. March 2, 2008.
- ^ BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 50.