Jump to content

User talk:Chjoaygame: Difference between revisions

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
Browse history interactively
← Previous edit
Content deleted Content added
VisualWikitext
→History of the Wikipedia article on heat: dated initial sentences or definitions
→Thermal energy: Reply to Chjoaygame.
 
(28 intermediate revisions by 6 users not shown)
Line 19: Line 19:
______________________________
______________________________


== the Editor of Superior Knowledge ==
== thanks, Ancheta Wis ==


At 18:41 on 2 June 2023, the Editor of Superior Knowledge demonstrated his superior knowledge by correcting
@[[User:Ancheta Wis|Ancheta Wis]]. Thank you. Yes, that's what I intended. Somehow I messed it up![[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 13:00, 28 February 2023 (UTC)
:::::"Another kind of heat transfer is by radiation."
into
:::::"Another kind of energy transfer is by radiation, performing work on the system."


This was done in the article [[Work (thermodynamics)]], not the article [[Heat]]. The edit was here https://en.wikipedia.org/enwiki/w/index.php?title=Work_%28thermodynamics%29&diff=1158226314&oldid=1158070006
== the editor of superior knowledge ==


{{ping|Dirac66}}. As you may have noticed, the editor of superior knowledge has endorsed the definition of heat as energy transferred because of temperature difference. That may be good enough for the Encyclopaedia Britannica, but surely Wikipedia should do better. Today the editor of superior knowledge demonstrated his superior knowledge by correcting "Another kind of heat transfer is by radiation" into "Another kind of energy transfer is by radiation, performing work on the system." I am inclined to guess that laser light could be made to perform work directly in transfer, but not ordinary light from thermal sources; I am not sure about this. I think that Planck would say that the temperature of laser light is higher than the thermal temperature of the body that emits it. I do not try to do anything in response to the works of the editor of superior knowledge, because I am inclined to see him as likely to respond further.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 22:27, 2 June 2023 (UTC)
There are two problems with this edit, the second of them characteristic of the Editor of Superior Knowledge. First, so far as I know, all reliable sources consider radiation to be a form of heat transfer, not of work. I find the edit to verge on the preposterous, but I didn't try to correct it because I have found it dangerous to try to correct the Editor of Superior Knowledge. Second, the edit left intact the source of the previous statement, Prevost, who thought in terms of radiation as heat transfer; he called radiation "free heat". This is characteristic of the editor of superior knowledge, not to bother to check references, but just to copy them, apparently unread. Yet the Editor of Superior Knowledge seems generally accepted as authoritative in these pages. Challenging him is often met savagely.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 01:33, 8 July 2023 (UTC)


==unresolved anaphora==
:I presume that you are referring to the editor who made 3 edits yesterday on the Heat article? I believe that the definition as energy transferred due to T difference is the usual introductory definition in textbooks. If you want to go further, then you will need references to support any more advanced definiton. [[User:Dirac66|Dirac66]] ([[User talk:Dirac66|talk]]) 00:42, 3 June 2023 (UTC)
Hi Editor @Nishidani ! I have marked the article https://en.wikipedia.org/wiki/Mbabaram_people with a query. You wrote "according to them". I am not quite sure whether "them" is the writers Windschuttle and Gittin, or whether it is the activists. I don't have an easy way to find out. I would be glad to learn which you meant.


Do you, perchance, have a reference for the proposition that Windschuttle and Gittins made that claim (In 2002, it was revived when Keith Windschuttle and Tom Gittin accused modern scholars in Australia of having suppressed the evidence)?[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 11:35, 23 August 2023 (UTC)
::Thank you for that clarification.


== Too complex for the lead ==
::I am coming from a long-standing Wikipedia tradition of definition of heat. That definition was established by a lot of work by many editors on the article on heat and on its talk page. Nearly all of the Wikipedia editors who worked on it now seem to have retired or moved to other parts of Wikipedia. The work on it was based on careful selection of the best reliable sources. It was loosely agreed that perhaps the most standard source was F. Reif (''Fundamentals of statistical and thermal physics'', 1965, McGraw-Hill). Since you don't recognize that, I can see that, at least for the present, that tradition is abandoned. I don't have the strength of motivation to try to resurrect it all on my own. I will just observe that one of the new edits we are talking about, in the article on [[Work (thermodynamics)]] ("Another kind of energy transfer is by radiation, performing work on the system."), as I read it, seems to express the idea that radiative transfer is work, not heat. Do you read it that way too?


While I do not disagree with the sense of your recent edit to the [[Friction]] page, I think the words used are far too complex for a lead, which should be at the level for a novice. I've worked in nanotribology for ~15 years, but would myself need to look up the exact words. Please rephrase in words a high-school student, for instance, will understand. [[User:Ldm1954|Ldm1954]] ([[User talk:Ldm1954|talk]]) 16:48, 30 August 2023
::A primary motive of the Wikipedia traditional definition was to have a rigorously logical development of thermodynamics. That meant defining heat purely through the first law before stating the thermodynamic definition of temperature in the context of the second law, basing the definition on a relationship of heat and thermodynamic work. The present Wikipedia definition of heat defies that. Thermodynamics regards the current SI definition of temperature as a theory-based definition of an empirical temperature, not as a definition of thermodynamic absolute temperature as per Kelvin.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 09:39, 3 June 2023 (UTC)
(UTC)


:Thank you for your comment. I will think about it.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 18:37, 30 August 2023 (UTC)
::I thought I would try to consider your above remark "I believe that the definition as energy transferred due to T difference is the usual introductory definition in textbooks." So I have started to look alphabetically at my textbooks. I am not clear about the difference between an "introductory definition" and a definition proper. Howsoever, in looking through my alphabetically first textbook (Adkins, C.J., 1983, ''Equilibrium Thermodynamics'', 3rd edition, Cambridge University Press), I came across the following. I thought that it might be useful to quote it here. There are various approaches to thermodynamics, and I know that some Wikipedia editors and other physicists disagree with Adkins.
:How about that?[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 18:44, 30 August 2023 (UTC)


== Definition of isentropic process ==
:::::It is perhaps because thermodynamics is not concerned with fundamentals in the microscopic sense that it sometimes does not appeal readily to the physicist; but he will disregard it at his peril. It is precisely because it avoids microscopic theories that it is so valuable. It often yields answers to problems where an understanding of the fundamental processes involved might be difficult or impossible. It also helps to prevent mistakes; for any result which does not satisfy the requirements of thermodynamics must be wrong. But, perhaps more important, a physicist's training is not only concerned with learning fundamental theories but also with developing a sensibility to the way in which physical systems behave, and here thermodynamics has a peculiar contribution to make by providing a very general framework of ideas from which the understanding of particular systems may more readily be achieved.


Your input would be greatly appreciated at [[Talk:Isentropic process#Definition of isentropic fundamentally wrong]]. [[User:Dolphin51|<i style="color: green;">''Dolphin''</i>]] ''([[User talk:Dolphin51|<span style="color: blue;">t</span>]])'' 05:52, 12 October 2023 (UTC)
::end of part comment.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 01:10, 4 June 2023 (UTC)


:Thank you for your kind invitation. I will try to think about it. It needs some searching for reliable sources. At present, there are some monstrous errors in this area, but I avoid trying to correct them because such an action seems only to make matters worse !! [[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 14:53, 13 October 2023 (UTC)
::I should clarify one of my above remarks as follows. I wrote
:::::Today the editor of superior knowledge demonstrated his superior knowledge by correcting "Another kind of heat transfer is by radiation" into "Another kind of energy transfer is by radiation, performing work on the system."
::This was done in the article [[Work (thermodynamics)]], not the article [[Heat]]. The edit was here https://en.wikipedia.org/enwiki/w/index.php?title=Work_%28thermodynamics%29&diff=1158226314&oldid=1158070006


==First law of thermodynamics==
::There are two problems with this edit, one of them characteristic of the editor of superior knowledge. First, so far as I know, all reliable sources consider radiation to be a form of heat transfer, not of work. I find the edit to verge on the preposterous, but I didn't try to correct it because I have found it dangerous to try to correct the editor of superior knowledge. Second, the edit left intact the source of the previous statement, Prevost, who thought in terms of radiation as heat transfer; this is characteristic of the editor of superior knowledge, not to bother to check references, but just to copy them, apparently unread. Yet the editor of superior knowledge seems generally accepted as authoritative in these pages. Challenging him is often met savagely.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 12:17, 30 June 2023 (UTC)
{{ping|Dolphin51}} Dear Dolphin51. Thank you for your attention to the article. There is a logical problem with the article on heat.


The current Wikpedia definition of heat is a reversal of decades of wikiconsensus. The current definition assumes temperature as defined before heat is defined. The more orthodox thermodynamic view is that thermodynamic temperature is defined in terms of the second law and entropy, after the first law definition of heat has been established without reference to temperature. The former wikiconsensus was that heat transfer is defined as the residual after thermodynamic work and matter transfer, for the first law. It is true and important that heat transfer is by "molecular" modes, but, from the point of view of thermodynamics, that is explanatory rather than fundamental, because thermodynamics is a macroscopic topic. It is also true that the current SI definition of temperature is not the same as the thermodynamic definition.
==Simply irreversible heat production==


The present Wikipedia definition of heat is in terms of the eighteenth century caloric theory, and ignores that heat is generated by friction, such as in Thompson's cannon boring experiment and Joule's paddlewheel experiment, as well as being transferred by conduction and radiation. It isn't too easy to gather a massive majority of reliable sources on this point: only the better sources do it properly. I want to avoid rocking the boat on the topic, but I also don't want to just forget it.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 17:33, 31 January 2024 (UTC)
Friction, in rubbing, in viscosity, in electrical conduction, and in hammering, is simply irreversible; one cannot undo friction. It was the turning point in physicists' escape from the caloric theory.


:Thanks for your message. I see you have a problem with the science embedded in the article on [[First law of thermodynamics]].
In friction, there is conversion of work into heat. The process is a transformation of energy as well as a transfer of energy. The arriving form of energy, in the body or thermodynamic system, is different from the departing form of energy, in the surroundings.
:I don't have a problem with the science, but I do have a problem with some of the language used. Some of it looks like a PhD thesis or technical writing for a peer-reviewed journal. It appears inappropriate for an encyclopaedia with a very broad audience. It is a technical article so is expected to conform to the principles in [[WP:Make technical articles understandable]]. An example of this is the following sentence which I amended but you restored. It is found in [[First law of thermodynamics#Original statements: the "thermodynamic approach"|Original statements: the "thermodynamic approach"]]:
::{{tq|The primitive notion of heat was taken as empirically established, especially through calorimetry regarded as a subject in its own right, logically prior to thermodynamics.}}
:If this sentence simply said "The primitive notion of heat was taken as empirically established prior to thermodynamics" I would understand it, and I would say it was well written. However, the sentence has an additional twelve words. Do these twelve words add a proportionate amount of information, meaning or value to the sentence? I must say no.
:Consider the clause "especially through calorimetry regarded as a subject in its own right". What is a non-expert reader to make of this clause? I think a non-expert reader would go elsewhere at this point. It reminds me of early attempts at technical writing by PhD candidates who are still labouring under the misconception that the best sentences are long, convoluted and complex.
:If the clause "especially ... in its own right" is genuinely relevant and important at this point in the paragraph, and if it reflects an idea found in reliable published sources, it can best be presented in its own sentence rather than clumsily inserted into an otherwise legitimate sentence about the early empirical origins of the concept of heat. Best wishes! [[User:Dolphin51|<i style="color: green;">''Dolphin''</i>]] ''([[User talk:Dolphin51|<span style="color: blue;">t</span>]])'' 13:14, 1 February 2024 (UTC)


::Thank you for your thoughtful comments. I didn't exactly restore the former version. I put in the word 'logically', because, as you noted, there was a gap in intelligibilty. But I agree that the wording is clumsy, and that the information perhaps needs two sentences. I agree that shorter sentences are better. I will have another try.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 01:48, 2 February 2024 (UTC)
Some of the heat generated by friction can be recovered as work, but not by simple reversal of friction.


== Invitation to participate in a research ==
===Adkins===


Hello,
Adkins starts with a definition of temperature, partly based on the zeroth law. He uses the ideal gas scale, calling it 'thermodynamic temperature'. I wonder how Kelvin would feel about that? Buchdahl would call it an 'empirical temperature'.


The Wikimedia Foundation is conducting a survey of Wikipedians to better understand what draws administrators to contribute to Wikipedia, and what affects administrator retention. We will use this research to improve experiences for Wikipedians, and address common problems and needs. We have identified you as a good candidate for this research, and would greatly appreciate your participation in this '''[https://wikimediafoundation.limesurvey.net/962595?lang=en anonymous survey]'''.
Now, as to heat in Adkins, I didn't find what I could recognize as an explicitly 'introductory' definition. I found a general exposition of the move from the Laplace–Lavoisier doctrine of caloric to the current thermodynamical theory of heat.


You do not have to be an Administrator to participate.
One of the factors in the move was the cannon boring experiment of https://en.wikipedia.org/wiki/Benjamin_Thompson, in his article https://en.wikipedia.org/wiki/An_Experimental_Enquiry_Concerning_the_Source_of_the_Heat_which_is_Excited_by_Friction.


The survey should take around 10-15 minutes to complete. You may read more about the study on its [[m:Special:MyLanguage/Research:Wikipedia Administrator Recruitment, Retention, and Attrition|Meta page]] and view its [[wmf:Special:MyLanguage/Legal:Administrator Experiences 2024 Survey Privacy Statement|privacy statement]] .
Thompson's idea was accepted by https://en.wikipedia.org/wiki/Julius_von_Mayer in 1842, as follows:
:::::Without recognizing the causal connection between motion and heat, it is just as difficult to explain the production of heat by friction as it is to give any account of the motion that disappears.
Mayer gave a calculation of the mechanical equivalent of heat, relying on frictional generation of heat in paper pulp, and on calorimetry.


Please find our contact on the project Meta page if you have any questions or concerns.
A further factor in the move to the current theory was the water paddle experiment of https://en.wikipedia.org/wiki/James_Prescott_Joule, another version of heat generation by friction. Another form of heat generation was examined by Joule, and described in his 'first law', https://en.wikipedia.org/wiki/Joule_heating.


Kind Regards,
Explicitly defining heat, Adkins writes on page 32:
:::::... We call it the ''internal energy'', <math>U.</math> Thus, when a change of state is brought about by the performance of work alone, the work done ''on'' the system is simply the change in the internal energy in going from the initial to the final state:
:::::::<math> \Delta U=W.</math> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(3.1)


[[mw:Special:MyLanguage/Wikimedia Research|WMF Research Team]]
:::::U is a function of state because W is independent of path.


<bdi lang="en" dir="ltr">[[User:BGerdemann (WMF)|BGerdemann (WMF)]] ([[User talk:BGerdemann (WMF)|talk]]) 19:27, 23 October 2024 (UTC) </bdi>
:::::'''3.4.&nbsp;&nbsp;&nbsp; Heat '''
<!-- Message sent by User:UOzurumba (WMF)@metawiki using the list at https://meta.wikimedia.org/enwiki/w/index.php?title=UOzurumba_(WMF)/sandbox_Research_announcement_list_for_enwiki_Potential_Admins&oldid=27650229 -->
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Equation (3.1) applies to a thermally isolated system. However, we know that it is also possible to change the state of a system without doing work on it. We may use heat alone, or any combination of heat and work. Thus, when a system is not thermally isolated equation (3.1) is no longer valid. It must now be modified to
:::::::<math> \Delta U=Q+W</math> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(3.2)
:::::We have thus defined heat as a form of energy entirely equivalent in its effect on the total energy of a system to energy communicated by the performance of some kind of work.


== Reminder to participate in Wikipedia research ==
No mention of temperature here.


Hello,
Eventually, Adkins is not quite clear about the definition of heat. He writes:


I recently invited you to take a survey about administration on Wikipedia. If you haven’t yet had a chance, there is still time to participate– we’d truly appreciate your feedback. The survey is anonymous and should take about 10-15 minutes to complete. You may read more about the study on its [[m:Special:MyLanguage/Research:Wikipedia Administrator Recruitment, Retention, and Attrition|Meta page]] and view its [[wmf:Special:MyLanguage/Legal:Administrator Experiences 2024 Survey Privacy Statement|privacy statement]].
:::::We have thus defined heat as a form of energy entirely equivalent in its effect on the total energy of a system to energy communicated by the performance of some kind of work. The distinction between heat and work is not always clear-cut in the sense that it is not always easy to decide whether a particular energy contribution should be classed as heat or work.


Take the survey '''[https://wikimediafoundation.limesurvey.net/962595?lang=en here]'''.
I think his unease in decision is due to his apparent failure to be clear, for a closed system, about the difference between work defined solely in the surroundings, and thermodynamic work defined by changes in the thermodynamic system's state variables other than temperature or entropy. An energy transfer as thermodynamic work done by the system on its surroundings is defined by both the changes in its state variables other than temperature and entropy, and the ordinary physically defined force × distance work. Apart from the idealization of an infinitely slow process, an energy transfer as work done by the surroundings on the system, defined through ordinary physical work in the surroundings, involves friction in the system, and is not identical with the associated thermodynamic work.


Kind Regards,
At this stage, Adkins is not considering transfer of matter.


[[mw:Special:MyLanguage/Wikimedia Research|WMF Research Team]]
Enough on Adkins for the moment.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 01:10, 4 June 2023 (UTC)


<bdi lang="en" dir="ltr">[[User:BGerdemann (WMF)|BGerdemann (WMF)]] ([[User talk:BGerdemann (WMF)|talk]]) 00:41, 13 November 2024 (UTC) </bdi>
===Anderson===
<!-- Message sent by User:UOzurumba (WMF)@metawiki using the list at https://meta.wikimedia.org/enwiki/w/index.php?title=UOzurumba_(WMF)/sandbox_Research_announcement_list_for_enwiki_Potential_Admins_(reminders)&oldid=27744489 -->


== ArbCom 2024 Elections voter message ==
Anderson, G., 2005, ''Thermodynamics of Natural Systems'', Cambridge University Press, is rather chatty in his introductory chapters. He writes:


<div class="ivmbox " style="margin-bottom: 1em; border: 1px solid #a2a9b1; background-color: #fdf2d5; padding: 0.5em; display: flex; align-items: center; ">
:::::A chemical reaction involves the rearrangement of atoms from one structure or configuration to another, normally accompanied by an energy change.
<div class="ivmbox-image noresize" style="padding-left:1px; padding-right:0.5em;">[[File:Scale of justice 2.svg|40px]]</div>
:::::....
<div class="ivmbox-text">
:::::It was discovered quite early that most chemical reactions are accompanied by an energy transfer either to or from the reacting substances. In other words, chemical reactions usually either liberate heat or absorb heat.
Hello! Voting in the '''[[WP:ACE2024|2024 Arbitration Committee elections]]''' is now open until 23:59 (UTC) on {{#time:l, j F Y|{{Arbitration Committee candidate/data|2024|end}}-1 day}}. All '''[[Wikipedia:Arbitration Committee Elections December 2024#Election timeline|eligible users]]''' are allowed to vote. Users with alternate accounts may only vote once.
:::::....
:::::To change the temperature of the crystal, heat must be applied to it. This sets up a temperature gradient between the inside and the outside of the crystal, and heat travels into the crystal, raising its temperature.
:::::....
:::::In everyday conversation we use words like heat, work, and energy quite frequently, and everyone has a sufficiently good idea of their meaning for our ideas to be communicated. Unfortunately, this type of understanding is not sufficient for the construction of a quantitative model of energy relationships like thermodynamics. To get quantitative about anything, or, in other words, to devise equations relating measurements of real quantities, you must first be quite sure what it is you are measuring. This is not too difficult if you are measuring the weight of potatoes and carrots; it is a more subtle problem when you are measuring heat, work, and energy. Historically, it took several decades of effort by many investigators in the nineteenth century to sort out the difficulties that you are expected to understand by reading this chapter!
:::::....
:::::• Heat (q) is the energy that flows across a system boundary in response to a temperature gradient.
:::::• Work (w) is the energy that flows across a system boundary in response to a force moving through a distance (such as happens when a system changes volume).


The [[WP:ARBCOM|Arbitration Committee]] is the panel of editors responsible for conducting the [[Wikipedia:Arbitration|Wikipedia arbitration process]]. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose [[WP:BAN|site bans]], [[WP:TBAN|topic bans]], editing restrictions, and other measures needed to maintain our editing environment. The [[Wikipedia:Arbitration/Policy|arbitration policy]] describes the Committee's roles and responsibilities in greater detail.
Apparently, Anderson, despite all his care, has forgotten about friction as a source of heat. Also, he is rather vague about what he means by "in response to a force moving through a distance." What is the cause of the force? It makes a difference whether the force is generated by the system in a process of spontaneous expansion, or by some factor in the surroundings. The force itself passes the work energy, which is therefore not a response to the force but is an aspect of the force itself.


If you wish to participate in the 2024 election, please review [[Wikipedia:Arbitration Committee Elections December 2024/Candidates|the candidates]] and submit your choices on the '''[[Special:SecurePoll/vote/{{Arbitration Committee candidate/data|2024|poll}}|voting page]]'''. If you no longer wish to receive these messages, you may add {{tlx|NoACEMM}} to your user talk page. <small>[[User:MediaWiki message delivery|MediaWiki message delivery]] ([[User talk:MediaWiki message delivery|talk]]) 00:24, 19 November 2024 (UTC)</small>
In his next chapter, about the first law of thermodynamics, Anderson goes on to talk about water entering and leaving a pond, in an analogy that is almost shamelessly chatty, and lacking in thermodynamic insight. He goes on to say:


</div>
:::::For “real” work processes, the work done is invariably less than the reversible work (Equation 3.7), usually much less, and usually of more interest to engineers than to geochemists.
</div>
<!-- Message sent by User:Cyberpower678@enwiki using the list at https://en.wikipedia.org/enwiki/w/index.php?title=Wikipedia:Arbitration_Committee_Elections_December_2024/Coordination/MM/03&oldid=1258243506 -->


== Thermal energy ==
:::::Planck divided processes into natural, ideal, and unnatural: For him, natural processes can actually occur, and I guess correspond with Anderson's “real” work processes. Ideal processes occur in the notebooks of physicists. Unnatural processes violate the second law and do not occur.


Greetings Chjoaygame. In your recent edit at [[Thermal energy]] you inserted text saying that internal energy is {{tq|The energy contained within a body of matter or radiation, specified by its entropy, volume and chemical constitution ...}}
:::::... such as work done by frictional forces, that you can review in a physics text.


Your explanation/definition implies that for a reader to comprehend the concept of internal energy, that reader must first understand the concepts of entropy and chemical composition!
Anderson goes on to talk about temperature without having given a thermodynamic definition of it. What he says is pretty much covered by what Buchdahl calls 'empirical temperature', and makes sense in that light. Anderson is largely concerned with chemical reactions and enthalpy. He is aiming to define "chemical energy". His actual words are in the first paragraph of his chapter on the first law:


As you know, internal energy assists us to work with the first law of thermodynamics, and entropy assists us to work with the second law. Your recent edit implies that to understand the first law, readers must have a prior understanding of the second law! Clearly not.
:::::'''3.1.1 Temperature'''
:::::One of the early triumphs of the study of thermodynamics was the demonstration that there is an absolute zero of temperature. However, there are several different temperature scales, for historical reasons. All you need to know about this is that the kelvin scale (named after William Thompson, Lord Kelvin) has an absolute zero of 0&nbsp;K and a temperature of 273.16&nbsp;K at the triple point where water, ice, and water vapor are at equilibrium together. The melting point of ice at one atmosphere pressure is 0.01&nbsp;degrees less than this, at 273.15&nbsp;K (Figure 3.1).


Please revisit your edit and make some necessary adjustments. The guidance at [[WP:Make technical articles understandable]] is highly relevant in this situation. Thanks. [[User:Dolphin51|<i style="color: green;">''Dolphin''</i>]] ''([[User talk:Dolphin51|<span style="color: blue;">t</span>]])'' 23:32, 14 December 2024 (UTC)
That is perhaps all that Anderson thinks the student needs to know about thermodynamic temperature at that point. Anderson goes on to postulate a state variable called 'entropy'. He says of it:


:Thank you, Dolphin51. You are right, you make a good point. My definition of internal energy does indeed use the concept of entropy. Not a smart move for the context. I will revisit.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 14:17, 15 December 2024 (UTC)
:::::The central fact about entropy as used in science is that it involves the distribution of energy in a system. Energy tends to become “spread out,” or delocalized, if not prevented from doing so.


:I have removed the specifying parameters. I was moved to make the edit by the previous version's talk of "total" energy. Total energy includes the potential energy with respect to an external field and the kinetic energy of the system moving as a whole. Even Wikipedia editors who feel that they know a lot can forget the point.
Soon, Anderson says:
:The statement of the first law is a bit tricky. It is mainly about the distinction between heat and thermodynamic work, and was originally for a closed system without transfer of matter. For the present day, I agree with Münster that it needs a connection with transfer of matter, which he writes as <math>U_0=U_1+U_2</math> for the amalgamation of two isolated systems into one isolated system.

:Please let me know if my revision needs further revision.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 14:36, 15 December 2024 (UTC)
:::::... in fact the heat engine approach is very useful in the derivation of Equation (4.3), and also the kelvin temperature scale.
::Thanks Chjoaygame. I think your most recent edit has eliminated that particular problem.

::In [[WP:Make technical articles understandable#Lead section]] it is emphasised that the lead section should be readily understood by as broad an audience as possible. With this in mind, I suggest that the text {{tq|The energy contained within a body of matter or radiation, excluding the potential energy of the whole system with respect to an external force field, and excluding the kinetic energy of the system moving as a whole}} could be simplified by using a blue link to [[potential energy]] and omitting the expression “with respect to an external force field.” Similarly, a blue link could be used for [[kinetic energy]].
But he doesn't pursue this, saying that it is scarcely necessary for the purpose of his book.
::By using this approach, the lead section is accessible to the very large audience of readers for whom ''potential energy'' simply means gravitational potential energy. For example, science students at the secondary school and High School level are introduced to potential energy, but it is gravitational PE. This large audience can be expected to immediately understand {{tq|the potential energy of the whole system}}, but the extra words “with respect to an external force field” reduce the understandability for this audience rather than increase it. Considering we are referring to the lead section, I suggest these 7 extra words should be omitted. [[User:Dolphin51|<i style="color: green;">''Dolphin''</i>]] ''([[User talk:Dolphin51|<span style="color: blue;">t</span>]])'' 23:23, 15 December 2024 (UTC)

:::Thank you again, Dolphin51, for your thoughtful and helpful care and patience. Your advice accepted. Please let me know if my revision needs further revision.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 06:05, 16 December 2024 (UTC)
Later, Anderson remarks:
::::Thanks Chjoaygame. The current version of the lead looks fine to me. Your revisions have met the objective! [[User:Dolphin51|<i style="color: green;">''Dolphin''</i>]] ''([[User talk:Dolphin51|<span style="color: blue;">t</span>]])'' 08:18, 16 December 2024 (UTC)

:::::Heat flows can be measured in various ways. One way is to observe some process in which heat is liberated under controlled conditions, resulting in a rise in temperature, and then duplicate that temperature rise using an electrical heater. The energy used by the heater can be measured exactly, and will equal the energy released by the process considered.

Evidently, an electrical heater can be used to generate heat, as noted by Joule.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 09:15, 4 June 2023 (UTC)

===Ansermet & Brechet===
Now to look at ''Principles of Thermodynamics'' by J.-P. Ansermet and S.D. Brechet, 2019, Cambridge University Press. They start with a picture of Joule, with a caption that says "In 1840, he stated the law that bears his name on power dissipated by a current passing through a resistance." Their actual text begins with 1839 work by Marc Séguin on the heat engine. They go on to mention that in 1842 Julius Robert von Mayer, in a treatise, asked "what is the change in temperature of a stone when it hits the ground after falling from a given height?" They remark that Joule actually measured that in 1845. I would say that the rise in temperature was due to friction of impact within the stone.

On the first law of thermodynamics, they say

:::::• ''P''<sub>''Q''</sub> represents the thermal power associated with heat exchange with the environment through conduction.
:::::• ''P''<sub>''C''</sub> represents the chemical power associated with matter exchange with the environment through convection.

:::::Any physical process performing work is called a mechanical action. Any physical process in which heat is exchanged is called a heat transfer. A physical process in which matter is exchanged is called a matter transfer or mass transfer. When a heat transfer takes place through a matter transfer, it is called a heat transfer by convection. When a heat transfer occurs without matter transfer, it is called a heat transfer by conduction. In general, a matter transfer leads simultaneously to a mechanical action and to a heat transfer.

Perhaps following Prigogine and Defay, they are happy to talk of rates of energy flow, which does not respect the rule of classical thermodynamics, which refers situations of changes of state from one thermodynamic equilibrium to another. I do not like the confusion that is introduced by talking of heat transfer as well as of heat "exchange". I think that talk of heat "exchange" is slippery. Max Born is careful to say that the energy transfer that accompanies matter transfer in itself cannot be resolved into heat transfer and work. The two latter forms of transfer, if simultaneous with matter transfer, to be identified, must occur by pathways separate from matter transfer. For example, radiative transfer of heat can be distinguished from energy transfer accompanying matter transfer. Maxwell said that matter transfer by convection was not a form of heat transfer. There is no mention of radiative transfer nor of friction here.

Ansermet & Brechet go on to remark that

:::::The chemical work could also be called '''''convective chemical heat'''''.

Soon they remark that

:::::We consider two colliding object that remain attached after impact. It can be shown that this type of collision has the maximum kinetic energy change.

In such a collision, the colliding bodies exhibit conversion of the kinetic energy of their relative motion into internal energy. Since there is a temperature increase in the bodies, one might be tempted to say that this occurred due to the internal friction in the collision. One might even consider talking of generation of heat. But Ansermet & Brechet talk only of kinetic energy and of internal energy, not of friction, nor of heat in this process. To say that the product is internal energy is to avoid saying whether it is transferred as heat or as work; that is equivocation like that of Adkins.

Ansermet & Brechet consider a fan in a room. They consider a viscous frictional torque associated with the motion of the fan, and calculate it by considering entropy production, but do not mention heat in this scenario. Again, to say that the product is entropy is to avoid saying whether the energy transfer is as heat or as work; that is equivocation like that of Adkins.

They consider a damped harmonic oscillator, and ask the student to calculate the power ''P''(''t'') due to the friction force, but they do not use the word 'heat' in this scenario.

In a section on heat in their chapter on the second law, they write:

:::::Let us begin with our experience of everyday life to illustrates [''sic''] various forms of heat transfers. When a stone warms up because it is exposed to the sun, it receives ‘''heat''’ by a thermal process that occurs in the absence of any macroscopic external force. It is due to heat transfer by radiation. When two objects at different temperatures are connected to each other, heat transfer takes place by conduction until both objects reach the same temperature. A third type of heat transfer takes place through convection. It is due to matter transfer from one region of space to another, which is at a different temperature. It is clearly distinct from heat transfer by radiation or conduction, since in both of these no matter transfer occurs.

Maxwell and Born would have qualms about that. Benjamin Thompson and Planck would be unhappy that it does not mention friction or rubbing.

Ansermet & Brechet deal with what Benjamin Thompson and Planck would call generation of heat sometimes by talking of entropy production, other times of heat production. They write:

:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Simple experiments points [''sic''] to the existence of entropy production, no matter in which way the process is carried out. For instance, entropy is produced in a fire or by rubbing hands together. It is also produced by an electric current flowing through a resistance. Many historical experiments, such as that of Earl Rumford (hollowing out of canons) or that of Humphry Davy (two ice blocks rubbed against each other), led to the conclusion that there are processes which cause an entropy production.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;In an isolated system, entropy can increase, but it cannot decrease. All experiments lead to this conclusion. For instance, a drill produces heat while it is drilling.

Enough about Ansermet & Brechet for the moment.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 10:56, 4 June 2023 (UTC)

===Atkins===
Now to look at Atkins, P., de Paula, J., Keeler, J., 2018, ''Physical Chemistry'', eleventh edition, Oxford University Press.

Their first sentence, for closed systems, that could be considered as a start to defining heat reads:

:::::Experiments have shown that the energy of a system may be changed by means other than work itself.

This expresses the admirable ideas of Bryan (1907) and of Carathéodory (1909) that are prime ingredients of rigorous modern thermodynamics.

In my opinion, Atkins ''et al.'' then go overboard by writing:

:::::The distinction between work and heat is made in the surroundings. The fact that a falling weight may stimulate thermal motion in the system is irrelevant to the distinction between heat and work: work is identified as energy transfer making use of the organized motion of atoms in the surroundings, and heat is identified as energy transfer making use of thermal motion in the surroundings.

I agree that thermodynamic quantities are always measureable through the surroundings. But that includes the internal state variables of the system. Atkins ''et al.'' demand that all features of a process of transfer of energy are defined by considerations that exclude the externally measured internal state variables of the system. They dismiss friction and rubbing, which Planck considered important; sad to say, it isn't easy to find English translations of Planck saying so. Atkins ''et al.'' use the notion of 'organized motion of atoms in the surroundings'. That is a notion foreign to thermodynamics proper, and hard to define in simple terms. Pressure in the surroundings is easily thought of as a manifestation of disorganized motion of atoms or molecules, but is able to do work as defined in the surroundings. In a real process, however, it will cause friction within the system, so that not all that work as defined in the surroundings will reach the system as thermodynamic work, which, for its definition, requires consideration of the externally measured internal state variables of the system. This is an example of what Adkins means by loss of clarity of thought when he talks about thermodynamics as a strictly macroscopic theory, as in his above quote.

Atkins ''et al.'' go on to remark that

:::::... no work is done when a system expands freely. Expansion of this kind occurs when a gas expands into a vacuum.

When a gas expands into a vacuum, there is transfer of matter from the originally enclosed body of gas to the originally empty space. The process is set going by the thermodynamic operation of removal of the partition between the two spaces. In the view of Max Born, such a process does not allow a distinction between heat and work because it includes transfer of matter. This is one reason why the first law is mainly about closed systems. This seems to be forgotten by Atkins ''et al.''.

It is becoming evident that I am inclined to prefer the thinking of the best and most reliable sources, as distinct from less reliable sources.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 02:14, 5 June 2023 (UTC)

===Attard===
Attard, P., 2002, ''Thermodynamics and Statistical Mechanics: Equilibrium by Entropy Maximisation'', Elsevier, Academic Press.

:::::Because no dissipative mechanisms have been introduced to this stage, the simple harmonic motion of the piston continues forever, and one can only speak of the equilibrium state in a statistical sense as the average position of the piston. In practice energy is lost due to friction and to the internal viscosity of the system. Assuming that the latter dominates, then when the motion of the piston has died out, ''dK'' = 0 and ''dE''<sub>1</sub> = — ''dE''<sub>2</sub>, so that all of the previous equilibrium analysis holds. Effectively the system has been heated by internal motion even though it is enclosed in adiathermal walls.

Many texts tell this story of friction. There is no mention here of microscopic factors such as unorganised motion of molecules. No mention of temperature here. [[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 19:09, 6 June 2023 (UTC)

===Baierlein===
Baierlein, R., 1999/2005, ''Thermal Physics'', 6th printing, Cambridge University Press.

:::::What are the common characteristics of these diverse means of heating and cooling? The following provides a partial list.
:::::1. There is net transfer of energy (to or from the system, be it frying pan or muffin or soda).
:::::2. The amount of energy transferred may be controlled and known at the macroscopic level but not at the microscopic level.
:::::3. The transfer of energy does ''not'' require any change in the system's external parameters.

:::::....

:::::In a fundamental way, one distinguishes two modes of energy transfer to a physical system:
:::::1. by heating (or cooling);
:::::2. by changing one or more external parameters.
:::::To be sure, both kinds of transfer may occur simultaneously (for example, if one irradiates a sample at the same time that one changes the external magnetic field), but the distinction remains absolutely vital.
:::::Energy transfer produced by a change in external parameters is called ''work''.

:::::....

:::::Elementary physics often speaks of three ways of heating: conduction, convection, and radiation. You may wonder, why is convection not mentioned here? Convection is basically energy transport by the flow of some material, perhaps hot air, water, or liquid sodium. Such "transport" is distinct from the "transfer" of energy to a physical system from its environment.
:::::To summarize: think of "heating" as a process of energy transfer, a process accomplished by conduction or radiation.

Evidently, for Baierlein, thermodynamic work is defined in terms of the external parameters of the system itself, without mention of ordinary physical work in the surroundings. For a closed system, for Bairlein, heating is defined by exclusion of thermodynamic work. Baierlein here forgets Joule's experiments.

Later, talking about the Carnot engine, Baierlein mentions rubbing and friction, but doesn't mention hammering or heat when he does so:

:::::(b) No dissipative processes, such as frictional rubbing or viscous damping of fluid motion, accompany the process.

Conduction more or less implies that the source of the transferred heat has a temperature. Laser radiation is an example of heat transfer when the temperature of the source is not counted. Baierlein doesn't tell us whether frictional rubbing, viscous damping of fluid motion, or hammering, are counted as work or as heat.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 20:12, 6 June 2023 (UTC)

===Blundell===
Blundell, S.J., Blundell, K.M., 2006, ''Concepts in Thermal Physics'', Oxford University Press.
Introductory comment:

:::::• In Chapter 2 we explore the concept of ''heat'', defining it as “energy in transit”, and introduce the idea of a ''heat capacity''.

Formal definition:

:::::We therefore make the following definition:
::::::::::::'''heat''' is ''energy in transit''.

Heating by transfer of heat from one thermodynamic system to another, and heating by rubbing a thermodynamic system with something in the surroundings:

:::::To see this, consider your cold hands on a chilly winter day. You can increase the temperature of your hands in two different ways: (i) by adding heat, for example by putting your hands close to something hot, like a roaring fire; (ii) by rubbing your hands together. In one case you have added heat from the outside, in the other case you have not added any heat but have done some work. In both cases, you end up with the same final situation: hands which have increased in temperature. There is no physical difference between hands which have been warmed by heat and hands which have been warmed by work.
:::::....
:::::&nbsp;&nbsp;&nbsp;&nbsp;Notice in this last example that the power in the heater is supplied by electrical work. Thus it is possible to produce heat by doing work. We will return to the question of whether one can produce work from heat in Chapter 13.

The conversion of ordinary physical work into heat occurs in the process of transfer.

In the section on the first law, some historical information. Lavoisier's 1789 notion of caloric. Thompson's 1798 heating by friction. Mayer's 1842 frictional generation of heat in paper pulp. Joule's frictional paddle experiment (1840 to 1845).[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 06:14, 7 June 2023 (UTC)

===Bridgman===
Bridgman, P.W., 1943, ''The Nature of Thermodynamics'', Harvard University Press.
:::::.... the spontaneous appearance of temperature differences, as for example generation of heat by friction or collision, ...
:::::....
:::::When the bodies are thus in contact it is an experimental fact that there is a transfer of heat if there is a temperature gradient in the material of the two bodies in the directions normal to the surface of separation. This sort of heat transfer is said to be by conduction.
:::::....
:::::The second method by which heat transfer may take place occurs when two bodies are not in contact, but confront each other across a vacuous space, with their opposing surfaces at a difference of temperature; this method of transfer is "radiational" transfer.

Considering the first law, Bridgman analyzes heat production by friction:

:::::We have the paradoxical result that the work received by the block from the pavement across the surface of separation is not equal to the work done on the pavement by the block. This failure of equality of direct and reaction work always occurs at a surface where there is tangential slip and there are forces in the direction of slip. This sort of thing does not occur very often in the conventional thermodynamic analysis; I think that many physicists have a sort of instinctive feeling that direct and reaction work are always equal. Obviously this can be the case only when there is no discontinuity in the motion at the surface, as at a piston which is compressing a gas.

I suppose the last phrase refers to the interface between the piston and the gas, not to that between the piston and the cylinder where there is friction. The difference between work done on the system, and work received by the system, by such a thing as a rotating paddle, was observed long ago by Bryan to be due to friction, and is the basis of the original experiments, by Davey, Thompson, Mayer, and Joule, that blew away the caloric theory and measured the mechanical equivalent of heat, but Bridgman is right to remark that this sort of thing does not occur very often in the conventional thermodynamic analysis. Perhaps the reason for this is that friction is not quite so easy to account for mathematically? [[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 06:41, 7 June 2023 (UTC)

===Bryan===
Bryan, G.H., 1907, ''Thermodynamics: an Introductory Treatise dealing mainly with First Principles and their Direct Applications'', B.G. Teubner, Leipzig.

Bryan was writing when thermodynamics had been established empirically, but people were still interested to specify its logical structure. The work of Carathéodory also belongs to this historical era. Bryan was a physicist while Carathéodory was a mathematician.

Bryan started his treatise with an introductory chapter on the notions of heat and of temperature. He gives an example of where the notion of heating as raising a body's temperature contradicts the notion of heating as imparting a quantity of heat to that body.

He defined an adiabatic transformation as one in which the body neither gains nor loses heat. This is not quite the same as defining an adiabatic transformation as one that occurs to a body enclosed by walls impermeable to radiation and conduction.

He recognized calorimetry as a way of measuring quantity of heat. He recognized water as having a ''temperature of maximum density''. This makes water unsuitable as a thermometric substance around that temperature.

His second chapter started with the recognition of friction as a source of heat, by [[Benjamin Thompson]], by [[Humphry Davy]], by [[Julius Robert von Mayer|Robert Mayer]], and by [[James Prescott Joule]].

He stated the ''First Law of Thermodynamics'', or ''Mayer–Joule Principle'' as follows:
:::::''When heat is transformed into work or conversely work is transformed into heat, the quantity of heat gained or lost is proportional to the quantity of work lost or gained.''

He wrote:
:::::If heat be measured in dynamical units the mechanical equivalent becomes equal to unity, and the equations of thermodynamics assume a simpler and more symmetrical form.''

He explained how the caloric theory of Lavoisier and Laplace made sense in terms of pure calorimetry.

Having rationally defined quantity of heat, he went on to consider the second law, including the Kelvin definition of absolute thermodynamic temperature.

In section 41, he wrote:
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;'''41. Physical unreality of reversible processes.''' In Nature all phenomena are irreversible in a greater or less degree. The motions of celestial bodies afford the closest approximations to reversible motions, but motions which occur on this earth are largely retarded by friction, viscosity, electric and other resistances, and if the relative velocities of moving bodies were reversed, these resistances would still retard the relative motions and would not accelerate them as they should if the motions were perfectly reversible.

He then stated the principle of conservation of energy.

He then wrote:
:::::In connection with irreversible phenomena the following axioms have to be assumed.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(1) If a system can undergo an irreversible change it will do so.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(2) A perfectly reversible change cannot take place of itself; such a change can only be regarded as the limiting form of an irreversible change.

On page 46, thinking of closed systems in thermal connection, he wrote:
:::::We are thus led to postulate a system in which ''energy can pass from one element to another otherwise than by the performance of mechanical work.''

On page 47, he wrote:
:::::When energy flows from on system or part of a system to another otherwise than by the performance of work, the energy so transferred i[s] called ''heat''.

On page 48, he wrote:
:::::Another important exception occurs when sliding takes place between two rough bodies in contact. The algebraic sum of the works done is different from zero, because, although the action and reaction are equal and opposite the velocities of the parts of the bodies in contact are different. Moreover, the work lost in the process does not increase the mutual potential energy of the system and there is no intervening medium between the bodies. Unless the lost energy can be accounted for in other ways, (as when friction produces electrification), it follows from the Principle of Conservation of Energy that the algebraic sum of the quantities of heat gained by the two systems is equal to the quantity of work lost by friction.

I don't know whether Max Born knew of Bryan's work when he persuaded Carathéodory to undertake a mathematical investigation of the foundations of thermodynamics, or whether Carathéodory knew of Bryan's work, as he prepared his celebrated 1909 paper.

In my opinion, Bryan's definition of heat is the best available, and has been accepted by many thermodynamicists, and by the preponderance of past editors of this Wikpedia article. I regard Bryan's ''Treatise'' as a Wikipedia reliable source.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 04:48, 23 June 2023 (UTC)

===Callen===

Callen's first edition (1960), talking about closed systems (no transfer of matter), says on page 7:
:::::Energy can be transferred to a mechanical mode of a system, such a flux of energy being called ''mechanical work''. Similarly, energy can be transferred to an electrical mode of a system. ''Mechanical work'' is typified by the term <math>- P \ dV</math> (<math> P</math> is pressure, <math>V</math> is volume), and ''electrical work'' is typified by the term <math>- E \ d \mathcal P</math> (<math> E</math> is electric field, <math>\mathcal P</math> is electric dipole moment). These energy terms and various other mechanical and electrical work terms are treated fully in the standard mechanics and electricity references. ''But it is equally possible to transfer energy to the hidden atomic modes of motion as well as to those which happen to be macroscopically observable.'' An energy transfer to the hidden atomic modes is called ''heat''.

Callen's second edition (1985, with material about statistical mechanics) is practically the same here.

No mention of temperature there. He is talking about an energy transfer into the system from its surroundings.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 06:44, 22 June 2023 (UTC)

===Çengel===

Çengel, Y.A., Boles, M.A., Kanoğlu, M., ''Thermodynamics: An Engineering Approach'', 9th edition, 2019. Talking first about the zeroth law, on page 17:
:::::It is a common experience that a cup of hot coffee left on the table eventually cools off and a cold drink eventually warms up. That is, when a body is brought into contact with another body that is at a different temperature, heat is transferred from the body at higher temperature to the one at lower temperature until both bodies attain the same temperature (Fig. 1–34). At that point, the heat transfer stops, and the two bodies are said to have reached {{font color|red|'''thermal equilibrium'''}}. The equality of temperature is the only requirement for thermal equilibrium.

In my opinion, this really belongs to the preliminary statement that thermodynamics deals with bodies in their own states of internal thermodynamic equilibrium, and in equilibrium with connected bodies. The authors then proceed to talk about temperature, not waiting for the second law to tell them how to define thermodynamic temperature.

On page 56, the authors write:
:::::An energy interaction is heat transfer if its driving force is a temperature difference. Otherwise it is work, as explained in the next section.

On page 60, they write:
:::::{{font color|red|'''Heat'''}} is defined as the form of energy that is transferred between two systems (or a system and its surroundings) by virtue of a temperature difference (Fig. 2–15). That is, an energy interaction is heat only if it takes place because of a temperature difference. Then it follows that there cannot be any heat transfer between two systems that are at the same temperature.
:::::....
:::::Heat is energy in transition. It is recognized only as it crosses the boundary of a system.

On page 62, they write:
:::::Work, like heat, is an energy interaction between a system and its surroundings. As mentioned earlier, energy can cross the boundary of a closed system in the form of heat or work. Therefore, ''if the energy crossing the boundary of a closed system is not heat, it must be work''. ... More specifically, ''work is the energy transfer associated with a force acting through a distance''.

On page 65, they write:
:::::In an electric field, electrons in a wire move under the effect of electromotive forces, doing work.

They do not explain precisely how these electromotive forces act through a distance.

On page 66, they focus on mechanical work, writing:
:::::There are several different ways of doing work, each in some way related to a force acting through a distance (Fig. 2–28).
:::::...
:::::There are two requirements for a work interaction between a system and its surroundings to exist: (1) there must be a force acting on the boundary, and (2) the boundary must move. Therefore, the presence of forces on the boundary without any displacement of the boundary does not constitute a work interaction.

They apparently feel no need to remark that their aforementioned electrical work violates their second requirement for "work": the boundary doesn't move. This is, however, a mere pedagogical convenience, or perhaps oversight, for they subsequently treat electrical separately from mechanical work.

On page 66, they write:
:::::Energy transmission with a rotating shaft is very common in engineering practice (Fig. 2–29).

They do relate this to the distance moved by a point in the rotating parts, measuring distance moved in a suitable way. But the boundary of the system is not displaced and doesn't move.

No mention so far of friction, but on page 68, they write:
:::::This discussion together with the consideration for friction and other losses form the basis for determining the required power rating of motors used to drive devices such as elevators, escalators, conveyor belts, and ski lifts.

On page 70, they discuss other forms of work, including electrical work:
:::::Some work modes encountered in practice are not mechanical in nature. However, these nonmechanical work modes can be treated in a similar manner by identifying a ''generalized force'' <math>F</math> acting in the direction of a ''generalized displacement'' <math>x</math>.

These engineers have discarded the foundational idea that friction generates heat. Thus, they reverse the thermodynamic tradition expounded by Bryan and by Carathéodory of defining heat by its not occurring through thermodynamic work, nor through transfer of matter. These engineers define thermodynamic work by its not occurring through heat.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 13:16, 22 June 2023 (UTC)

The reversal of the orthodox thermodynamic tradition is an example of circular reasoning. Quantity of energy transferred as heat is defined in terms of "work", while "work" is defined in terms of heat. This might be resolved by giving "work" two distinct and logically unconnected definitions, committing an act of logical equivocation. Wikipedia should avoid logical equivocation in its presentations.

More should be said. While it is possible to define empirical temperatures and so to define quantity of energy transferred as heat when it is between two bodies that each possess its respective temperature, it is convoluted and undesirable to need to redefine thermodynamic temperature after the acceptance of the second law. One might argue that the second law precedes the first law in logic, though that would be a hard road to hoe: how to define entropy without a prior definition of the distinction between heat and work transfers. A further problem with defining heat in terms of temperature difference is that not all sources of radiation, nor all sources of conducted heat, have a definite and uniquely defined temperature, so that the two-body definition of heat transfer doesn't work. From the orthodox thermodynamic viewpoint, the two-body temperature difference definition is merely a special case of the proper general definition by exclusion of thermodynamic work. The solution to the latter problem is to stay with the traditional thermodynamic base case of a system and its surroundings: the system has properly and uniquely defined thermodynamic state variables; but the surroundings are not so constrained; in the surroundings, from the viewpoint of thermodynamics, anything goes.

These points were, over several years long ago, established in this talk page, but they seem to have been discarded recently. The article should perhaps thoroughly explain this logic.

For Wikipedia, a good resolution is to avoid circular and convoluted reasoning, and to stay with the orthodox thermodynamic position, and to declare, solely for this specific purpose, that Çengel, Boles, and Kanoğlu 9th edition is not a reliable source.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 03:16, 23 June 2023 (UTC)

===Denbigh===
Denbigh K., ''The Principles of Chemical Equilibrium: with Applications in Chemistry and Chemical Engineering'', 4th edition, 1981, Cambridge University Press.

On page 10, Denbigh wrote:
:::::... we shall speak of any change taking place inside an adiabatic wall as being an ''adiabatic process''.

This is thinking in terms of calorimetry, not so much in terms of the idea of Locke, Thompson, Mayer, and Joule, that friction generates heat.

On page 18, Denbigh wrote:
:::::In the discussion of Joule's experiments we were concerned with the change in state of a body contained within an adiabatic enclosure. It would have been wrong to have spoken of the temperature rise of the water as having been due to heat (although this is sometimes done in a loose way); what we were clearly concerned with were changes of state due only to work. However it is also known from experience that the same changes of state can be produced, without the expenditure of work, by putting the body into direct contact (or through a non-adiabatic wall) with something hotter than itself. That is to say the change of internal energy, <math>U_A-U_B</math> can be obtained without the performance of work. We are therefore led to postulate a mode of energy transfer between bodies different from work and it is this which may now be given the name heat. Our senses and instruments provide us with no direct knowledge of heat (which is quite distinct from hotness). The amount of heat transferred to a body can thus be determined, in mechanical units, only by measuring the amount of work which causes the same change of state.

Denbigh is thinking of heat as defined by calorimetry, relying on two bodies, each with a defined temperature. This thinking seems to show that, after all, Joule did not measure the mechanical equivalent heat, because he did not heat the water in the vat. Denbigh would perhaps reply that, nevertheless, the water changed its internal energy by the same amount as it would change if the process had been one of heating by conduction and radiation. That reply, however, relies on the Joule experiment having converted all the externally applied work into heat. If only some of the externally applied work were transformed into heat, more complicated reasoning would be necessary, as indicated by Bryant and by Bridgman. This may explain why Planck talks of surface rubbing as distinct from internal friction.

Denbigh on page 19 wrote:

:::::... it follows from the above definition of heat that the heat gain of the first body is equal to the heat loss of the second.

This might be called 'the principle of calorimetry', and is the main basis of the caloric theory of heat. Bryant and Bridgman would reply that they do not accept such an equality as a general principle. It does not cover friction in such processes as drilling, rubbing, grinding, or hammering.

Denbigh made some concessions to the idea of thermodynamic work as defined by changes of state variables other than thermal, ''i.e.'', other than entropy and temperature. For discussion of heat, the internal energy is always one such state variable. Denbigh mentioned Joule's measurements of the energy changes due to friction between iron blocks, but he did not elaborate. He also wrote the following:

:::::Similarly, in the irreversible process of friction, the kinetic energy of a body as a whole is converted into the random energy of its component molecules.

For example, in hammering. This didn't deal with rubbing. Apart from the latter two brief mentions, Denbigh conveniently ruled out discussion of friction.

For the definition of work, however, Denbigh wrote:

:::::Similar expressions may be obtained for the stretching of wires, the work of magnetization, etc.‡
:::::‡ A very clear account of work terms is given by Zemansky, ''Heat and Thermodynamics'' (New York), McGraw-Hill, 1968, and by Pippard, ''loc. cit.''

The 'work' terms are sometimes taken to exclude 'chemical work'.

Eventually, Denbigh disallows the heat produced by friction. He relies on a roundabout calorimetric definition, supposing that heat comes from a convenient "heat bath" of water at its temperature of maximum density, and writing:
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Consider now a type of process <math>A \rightarrow B</math> in which a body <math>X</math> both absorbs heat and has work <math>w</math> done on it. In this process let its change of internal energy be <math>U_B-U_A</math>. We shall suppose that the heat comes from a ''heat bath'', that is, a system of constant volume which acts as a reservoir for processes of heat transfer, but performs no work (e.g. a quantity of water at its temperature of maximum density). Let its change of internal energy in the above process be <math>U^\prime_B-U^\prime_A</math>. Then for the body <math>X</math> and the heat bath together we have,
:::::::::::<math>w=[(U_B-U_A)+(U^\prime_B-U^\prime_A)],</math>
:::::the right-hand side being the total change of internal energy. But according to the above definition <math>U^\prime_B-U^\prime_A</math> is equal to the negative of the heat lost by the bath and is equal therefore to the negative of the heat gained by <math>X</math>. If we denote this heat by <math>q</math>, we therefore have <math>q=-(U^\prime_B-U^\prime_A)</math>. Substituting in the previous equation we obtain
:::::::::::<math>U_B-U_A=q+w</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(1·8)
:::::as a statement of the first law for a body which absorbs heat <math>q</math> and has work <math>w</math> done on it, during the change <math>A \rightarrow B</math>. This law therefore states that the algebraic sum of the heat and work effects of a body is equal to the change of the function of state, <math>U</math>, i.e. the algebraic sum is independent of the choice of path <math>A \rightarrow B</math>.

A chemist is hardly interested in friction at this stage of thinking, and this perhaps explains why Denbigh defies Thompson, Mayer, and Joule, and rules out friction as a generator of heat. Friction is more the province of physicists such as Planck.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 11:46, 1 July 2023 (UTC)

===Dugdale===

Dugdale wrote on page 4:
:::::To this day calorimetry requires 'the most scrupulous attention to many circumstances which may affect the result'. A great deal of scientific effort still goes into the accurate measurement of heat capacities over a wide range of temperatures and indeed this is still one of the primary measurements in thermodynamics.

On page 20, he wrote:
:::::We now define the difference between <math>\Delta U</math> and <math>W</math> (this difference is zero in adiabatic changes) as a measure of the heat <math>Q</math> which has entered the system in the change. We shall treat the heat ''entering'' a system as ''positive''. Thus
:::::::<math>Q = \Delta U - W.</math>

On page 21, he wrote:
:::::Let me emphasise again that in the approach outlined here (due originally to Born) the thermodynamic concept of quantity of heat has been introduced and defined in terms of purely mechanical quantities.

Dugdale gives plenty of detail on Thompson's and on Joule's experiments, described by them as production of heat by friction, but he interprets them as occurring through work. Nevertheless, he gives much attention to calorimetry, as noted above.

On page 21, he wrote:
:::::... heat is a form of energy ''in transit'' and cannot be said to exist except when changes of state are occurring.

:::::...

:::::Note that the thermodynamic concept of heat conflicts, in some important ways, with the common usage of the word. We say that heat is transferred from one body to another and that, for example, the heat lost by one body is gained by the other. There is thus a strong implication that the heat was originally inside the first body and ended up after the transfer inside the other body. It is precisely this notion that we have to get rid of in order to think clearly about heat, work and internal energy.

Dugdale is not interested in friction, and puts his faith in a principle of calorimetry, that the heat lost by one body is gained by the other. He defines work in terms of what happens in the surroundings, apparently not in terms of the change it produces in the state variables of the system. Yet, for the interpretation of experiments, he also relies on the definition of the state of the system in terms of 'work' variables, including internal energy.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 10:24, 30 June 2023 (UTC)

===Dunning-Davies===
Dunning-Davies, J., 2011. ''Concise Thermodynamics: Principles and Applications in Physical Science and Engineering'', 2nd edition, Woodhead Publishing, Oxford UK.

On page ''ix'', Dunning-Davies wrote:
:::::Thermodynamics is concerned with heat. Notions of "hot" and "cold", of one body being warmer than another, and the idea of the "flow of heat" are all central to the subject and, in science, '''all''' retain the meanings they have in our everyday lives. Initially, curiously enough, it is probably this latter point which is most difficult for many to accept but that is the absolute truth, thermodynamics is concerned with notions and concepts which are, in a non-scientific way, familiar to everyone. If this seemingly trivial point is borne in mind always, academic study of thermodynamics takes on a whole new perspective and is not a difficult subject to understand and appreciate.

Evidently, Dunning-Davies is not too concerned or overfamiliar with the cave man's ability to generate heat by friction between sticks, or with the coachman's concern that sometimes the heat generated by friction of his axle with it bearing can set the coach on fire, or with the blacksmith's heating of his work by hammering. Those primitive fellows are not overfamiliar with the caloric theory of heat. Apparently, Dunning-Davies is happy with the ordinary language word 'heat' as a scientific term. He sees no need to explicitly define it in this context. He will remain content to talk of two systems being brought into thermal contact. Does that include mutual radiative exposure?

On page 1, Dunning-Davies, without explicitly defining it, introduces a term 'thermal properties' as follows: he remarks that "...the laws of thermodynamics ... are simply expressions of common experience of the thermal properties of matter and radiation." On page 2, again without explicitly defining it, in the context of the caloric theory, he uses the term "thermal contact".

On page 5, Dunning-Davies focuses on two bodies that each possess a temperature, not worrying about the general approach to thermodynamics that requires the system to have a temperature, but does not impose any such requirements on the surroundings. He wrote:
:::::As has been mentioned already, everyone is familiar with such elementary notions as 'A is warmer than B', 'B may gain heat from A', and the qualitative notion of the 'flow of heat'. Also, everyone knows that, when the flow of heat between two systems has ceased, those systems are said to be in thermal equilibrium.

On page 13, Dunning-Davies wrote:

:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Now consider an isolated system in which there is no thermal interaction with the surroundings. It is a 'fact of experience' that, if work is done on the system in some way, the system attains a new equilibrium state and it does not matter how the work which achieves this is done: for example, a gas may be compressed, or stirred, or have an electric current passed through it. It was one of Joule's great contributions to thermodynamics to demonstrate experimentally that this is the case. The result is that energy is given to the system during the process and, since no thermal interaction is involved, the process is said to be '''''adiabatic'''''.
:::::...It follows that, if a system is caused to change from some initial state to a final state by adiabatic means, the work done is the same no matter how it is done.. Hence, there must exist a function of the coordinates of the system whose value in the final state minus its value in the initial state equals the work done in going from one state to the other. This function of state is called the '''''internal energy''''' and is denoted by <math>U</math>. For the isolated system
:::::::::::<math>W_{\text{a}}=U_2-U_1</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(3.1)
:::::where <math>U_2</math> and <math>U_1</math> are the final and initial values respectively of the internal energy and <math>W_{\text{a}}</math> is the work done in this adiabatic process; the suffix <math>\text{a}</math> indicating that the process is adiabatic.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Suppose now that the system is not isolated as above but that thermal interaction between the system and its surroundings is allowed. In this case, the system may be taken from the state with internal energy <math>U_1</math> to that with internal energy <math>U_2</math> by a process which is not necessarily adiabatic. Such a process may be achieved by performing work which may be mechanical – for example, the use of a stirrer, non-mechanical – for example, the use of a heating element, or a combination of the two. Let <math>W_{\text{na}}</math> denote the mechanical work done on the system in a process which is not necessarily adiabatic; the suffices <math>\text{na}</math> indicating that the process is not necessarily adiabatic. Then
:::::::::::<math>W_{\text{a}}-W_{\text{na}}=Q</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(3.2)
:::::and for all such processes
:::::::::::<math>Q+W_{\text{na}}=U_2-U_1</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(3.3)
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Here <math>Q</math> is zero for adiabatic processes only. In a non-adiabatic process, <math>Q</math> may be thought of as making up the deficit of mechanical work by heat. Hence, the amount of heat is defined in terms of mechanical work only. The convention adopted is that positive values of <math>Q</math> will mean heat supplied to the system. Also, it should be noted that, although it has not been stated explicitly, attention has been confined to closed systems; that is, systems which do not transmit mass to, or receive mass from, the surroundings.

Dunning-Davies is not precise about exactly how to specify adiabatic and non-adiabatic work.

On page 26, Dunning-Davies wrote:
:::::These forms of the law are those used at the birth of thermodynamics as a subject in its own right. As mentioned already, the laws were deduced from experiment and observation, and many of the ideas were borrowed from engineering. The notions and experiences of the engineer were used to obtain the laws of heat transformation and it is a tremendous achievement that a theory with many highly abstract concepts should be established by this approach. However, the approach to be adopted here is more mathematical in nature than some earlier arguments and is a modification of the method introduced at the beginning of this century by the mathematician Constantin Carathéodory. Carathéodory became interested in the problem of the formulation of thermodynamics at the instigation of his colleague, the physicist Max Born, and his highly mathematical original paper appeared in 1909. Because of the mathematical complexities of his approach, his work passed largely unnoticed, until the postwar work of such as Buchdahl, Landsberg, Turner and Zemansky made it far more accessible to scientists in general.

Evidently, Dunning-Davies knows the highly mathematical work of Carathéodory but seems unimpressed by the prior more thermodynamic work of Bryant.

Dunning-Davies so loves the caloric theory of heat that he sets up the above roundabout way of defining heat through mechanical processes only, apparently not impressed by Thompson's, Mayer's, and Joule's methods of allowing straightforward mechanical definition of quantity of heat by measuring its production in friction. Why do things the easy and obvious way when you can do them a hard way?[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 10:06, 1 July 2023 (UTC)

===Giles===
Giles, R., 1964, ''Mathematical Foundations of Thermodynamics'',Pergamon Press, Oxford.

On page 1, Giles wrote:

:::::A familiar way of introducing the concept of absolute temperature in elementary expositions of thermodynamics is through the consideration of a Carnot cycle, in which a reversible heat engine operates between two heat reservoirs at different temperatures. This approach reveals clearly the essential nature of absolute temperature and has immediate physical appeal. The derivation of the concept of entropy, on the other hand, depends on considerations of a mathematically much more sophisticated nature, so that the physical significance of this concept remains initially relatively obscure.

On page 2, introducing another way of defining entropy, Giles wrote:

:::::With this approach to entropy it is not necessary to define absolute temperature by means of a Carnot cycle; instead it can be obtained from entropy by a process of differentiation, just as entropy is usually obtained from temperature by integration. We thus obtain a way of introducing entropy which is physically very satisfying, since it emphasises the essential property of entropy: that its increase measures the irreversibility of a process. However, this approach is not entirely satisfactory from a logical point of view, since it still depends on the qualitative concept of temperature (through the use of a heat reservoir) and also on the possibility of making quantitative comparisons of energy changes (in the measurement of <math>E</math>).

Still on page 2, about a better way of defining entropy, Giles wrote:
:::::The virtue of this approach to entropy is not only that it is independent of the concepts of temperature and energy, but that it is actually independent of any quantitative concepts at all. For it presents the measurement of entropy as resulting from a sequence of experiments of a qualitative nature, the result of each experiment being simply ''yes'' or ''no''.

After some consideration of frictionless mechanical processes, and then explicitly defining entropy, looking at a thermodynamic system ''A'' connected to a mechanical device ''M'' in the surroundings, on page 109, Giles wrote:

:::::If ''M'' is, for instance, a spinning flywheel this might be done by allowing ''M'' to rub on ''A'' until some energy, in the form of frictional heat, had passed from ''M'' to ''A''; or an auxiliary electrical heater might be used as described in § 1.5.

On page 115, Giles wrote:
:::::Further, we have, by Theorem 9.2.3, for any infinitesimal quasi-static process
::::::::::::<math>\text{d}E=T \ \text{d}S - P \ \text{d}V</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 12.1 (2)
:::::and, in particular, for an infinitesimal quasi-static adiabatic process <math>\text{d}E=- P \ \text{d}V</math>. These results accord with the description of <math>T</math> and <math>P</math>, as defined above, as absolute temperature and pressure.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Equation 12.1 (2) expresses the energy transferred to the system in an infinitesimal quasi-static process as the sum of two terms, <math>\text{d}E=T \ \text{d}S</math> and <math>- P \ \text{d}V</math>, which we may call, respectively, the ''heat supplied to'' the system and the ''work done on'' the system'. It should be noted that the terms "heat" and "work", thus defined, apply only to quasi-static processes; the present formulation of thermodynamics provides no such division of the energy transferred in a non-quasi-static process.

As Giles observes, his definition of heat here relies on the concept of a quasi-static process. Is this perhaps necessary for a definition of heat? For example, the definition of thermodynamic work, for a finite increment of volume at constant pressure requires that the process be slow enough to allow the pressure of the system to be defined throughout it; this definition also requires that the process be slow enough to allow the temperature to be defined throughout it. This definition demands the simultaneous definition of heat and thermodynamic work.

We may observe that this definition of heat does not consider such an abrupt process as hammering to produce heat. Hammering, drilling, fluid friction, and rubbing, convert energy from the surroundings directly into heat. The energy from the surroundings can be measured directly without regard to the intimate details of the process, and, provided it is all converted to heat, it can measure the quantity of heat directly. That is the merit of the works of Thompson, Mayer, and Joule. It might reasonably be objected that in such processes, some of the energy from the surroundings is converted into heat in the surroundings. For example, the hammer will become hot. It seems to follow that some kind of idealization is necessary for the precise definition of thermodynamic quantities.

Eventually, Giles defines heat through his prior definition of entropy. He relies on entropy as measuring the whole irreversibility of any thermodynamic process. He is presenting the idea of heat after he has settled on the second law of thermodynamics. This is reasonable and logically defensible, though it is not the commonest way to define heat. This mathematically oriented reasoning of Giles competes with the older physically oriented work of Clausius, that defined entropy in terms of infinitesimal increments of heat, and with the older physically oriented work of Bryan and mathematically oriented work of Carathéodory that defined heat as a residual from work. It is often felt that defining things in terms of adiabatic work is straightforward, and is evidently based on simple physics.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 09:41, 3 July 2023 (UTC)

===Grandy===
Grandy, W.T., 2008, ''Entropy and the Time Evolution of Macroscopic Systems'', Oxford University Press, Oxford UK.

Leading up to an account of entropy, on page 3, Grandy wrote:
:::::The point here is that there exists a sense of something missing when we contemplate heat, some kind of lack of information that is present with work. When a block of wood is moved forcefully across a table, with some downward pressure, the work done on the block goes partly into giving it some kinetic energy, and partly into providing some thermal energy to both block and table; this is verified by increased temperatures. The thought that not all the work went toward kinetic energy conveys a sense of loss, that part of the input energy was degraded to an unorganized form. From a physical point of view this sort of mechanical uncertainty in energy transfer is the essence of heat, and it encompasses its characterization as a form of motion. It is this essence we wish to examine and clarify in what follows, in the course of which we shall find that it is not confined to the notion of heat.

Grandy does not go on to consider the details of thermodynamics, such as an explicit definition of 'heat', because he is concerned with statistical mechanics.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 05:08, 4 July 2023 (UTC)

===Guggenheim===
Guggenheim, E.A., 1967, ''Thermodynamics: An Advanced Treatment for Chemists and Physicists'', North Holland, Amsterdam.

On page 9, Guggenheim excluded friction from his book, writing:
:::::When these branches of physics are idealized so as to exclude friction, viscosity, hysteresis, temperature gradients, temperature dependence of properties, and related phenomena, the fundamental property of energy can be described in two alternative ways.

On pages 9–10, Guggenheim wrote:
:::::Let us now consider in greater detail the interaction between a pair of systems, supposed isolated from the rest of the universe. Using superscripts <math>^\text{A}, ^\text{B}</math> to relate to the two systems we have
::::::::::<math>\text{d}U^\text{A}+\text{d}U^\text{B}=0</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.1
:::::or
::::::::::<math>\text{d}U^\text{A}=-\text{d}U^\text{B}</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.2
:::::but in general this is not equal to the work <math>w_\text{BA}</math> done by <math>\text{B}</math> on <math>\text{A}</math>. In other words there can be exchange of energy between <math>\text{A}</math> and <math>\text{B}</math> of a kind other than work. Such an exchange of energy is that determined by a temperature difference and is called ''heat''. If then we denote the heat flow from <math>\text{B}</math> to <math>\text{A}</math> by <math>q_\text{BA}</math>, we have the following relations
::::::::::<math>\text{d}U^\text{A}=w_\text{BA}+q_\text{BA}</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.3
::::::::::<math>\text{d}U^\text{B}=w_\text{AB}+q_\text{AB}</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.4
::::::::::<math>w_\text{BA}+w_\text{AB}=0</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.5
::::::::::<math>q_\text{BA}+q_\text{AB}=0</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1.10.6
:::::This set of relations together constitutes the ''first law'' of thermodynamics.

Evidently, Guggenheim recognizes that, in thermodynamics, heat is a process notion, and that it is defined by exclusion of work.

But also evidently, Guggenheim isn't interested in the tradition that thermodynamics is based on statements about a system and its surroundings, while he prefers to think in terms of two interacting thermodynamic systems; and, not admitting the idea of friction, he isn't interested in the Thompson–Mayer–Joule–Bryant–Bridgman–Planck idea that it generates heat, so that it isn't necessary that <math>w_\text{BA}+w_\text{AB}=0</math> and <math>q_\text{BA}+q_\text{AB}=0</math>. Friction is essentially a process notion, referring to the surroundings, and is not discussed in detail in thermodynamics; only its effects are recognised there.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 07:04, 4 July 2023 (UTC)

===Keenan===
Keenan J.H., 1941, ''Thermodynamics'', John Wiley & Sons.

On page 6, Keenan wrote:
:::::Heat is that which transfers from one system to a second system at lower temperature, by virtue of the temperature difference, when the two are brought into communication.

On page 9, referring to paddlewheel experiments without mentioning Joule's name, Keenan wrote:
:::::Experiments of this sort have been carried out, and they show that the work done in raising the weight is proportional to the heat delivered by the system to the calorimeter.

No mention there of friction. Actually, Keenan here inverts the usual idea that the 'system' is the calorimetric vat, and that the 'surroundings' are the location of the falling weight.

On page 67, omitting from his book mention of Joule's measurements of the mechanical equivalent of heat, and having excluded friction till this point, Keenan wrote:
:::::We shall show with the aid of the Second Law that no process is reversible which involves (''a'') ''friction'', (''b'') ''transfer of heat across a finite interval of temperature'', ''or'' (''c'') ''unrestrained expansion to lower pressure'':
:::::(a) An example of a change of state involving friction is the change in a viscous fluid system at constant volume resulting from rotation of a paddle wheel in the fluid. The only effects of this process are a rise in the temperature of the fluid and the fall of a weight which causes the paddle wheel to rotate (Fig. 32).

On page 114, Keenan observed that the work done by the prime mover may exceed the work received by the moved element, the difference being due to friction:
:::::Friction between piston and cylinder and between moving parts and bearing surfaces will absorb some work for each increment of the piston stroke; and, if the net work done by the fluid on the piston over that increment is less than the work absorbed, it is better to eliminate that part of the stroke.

This is in accord with the view of Bryan and Bridgman, but Keenan does not enter it into his definition of heat. Keenan neatly avoids talk of heat here, just talking about "work absorbed". What is 'absorption' of work?

Likewise, on page 132, Keenan avoided talk of heat when he wrote:
:::::... a stage with high stream velocities will suffer serious losses of work from friction.

"Losses of work"? What does that mean? Keenan wrote anything except that friction produces heat.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 11:22, 4 July 2023 (UTC)

==temporarily out of alphabetical order==

===Schroeder===
Schroeder, D.V., ''Introduction to Thermal Physics'', 2000, Addison Wesley Longman, San Francisco. Schroeder is writing from the viewpoint that starts from microscopic physics, as against the thermodynamic viewpoint that starts with macroscopic physics. He leads with
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;'''Heat''' is defined as any spontaneous flow of energy from one object to another, caused by a difference in temperature between the objects. We say that "heat" flows from a warm radiator into a cold room, from hot water into a cold ice cube, and from the hot sun to the cool earth. The ''mechanism'' may be different in each case, but in each of these processes the energy transferred is called "heat."
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;'''Work''', in thermodynamics, is defined as any other transfer of energy into or out of a system. You do work on a system whenever you push on a piston, stir a cup of coffee, or run current through a resistor. In each case, the system's energy will increase, and usually its temperature will too. But we don't say that the system is being "heated," because the flow of energy is not a spontaneous one caused by a difference in temperature. Usually, with work, we can identify some "agent" (possibly an inanimate object) that is "actively" putting energy into the system; it wouldn't happen "automatically."
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The definitions of heat and work are not easy to internalize, because both of these words have very different meanings in everyday language. It is strange to think that there is no "heat" entering your hands when you rub them together to warm them up, or entering a cup of tea that you are warming in the microwave. Nevertheless, both of these processes are classified as work, not heat.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Notice that both heat and work refer to energy ''in transit''. You can talk about the total ''energy'' inside a system, but it would be meaningless to ask how much heat, or how much work, is ''in'' a system. We can only discuss how much heat ''entered'' a system, or how much work ''was done on'' a system.
:::::''Footnote'': Many physics and engineering texts define ''W'' to be positive when work-energy leaves the system rather than enters. Then equation 1.24 instead reads Δ''U'' = ''Q'' − ''W''. This sign convention is convenient when dealing with heat engines, but I find it confusing in other situations. My sign convention is consistently followed by chemists, and seems to be catching on among physicists.

Schroeder does make the important point that "both heat and work refer to energy ''in transit''.

But, like Çengel ''et al.'', Schroeder defines thermodynamic work by exclusion of heat.

This reverses the logic of Bryant and Carathéodory, who define heat by exclusion of work. Schroeder's definition of work, by exclusion of heat, is in contrast with the usual idea in physics, that work is defined mechanically, in terms of such things as the ability to lift a weight. Thermodynamics began with the idea that spontaneous work is done by the working body of a heat engine, not with Schroeder's idea that

:::::Usually, with work, we can identify some "agent" (possibly an inanimate object) that is "actively" putting energy into the system; it wouldn't happen "automatically".

Schroeder doesn't seem to consider friction within the system such as occurs in Joule's paddle wheel experiment.

In the above quote from Schroeder, there is no mention of friction. His first mention of friction is in the following footnote:

:::::Even for quasitatic compression, friction between the piston and the cylinder walls could upset the balance between the force exerted from outside and the backward force exerted on the piston by the gas. If ''W'' represents the work done on the gas by the piston, this isn't a problem. But if it represents the work ''you'' do when pushing on the piston, then I'll need to assume that friction is negligible in what follows.

Though Schroeder is not focusing on friction, that remark is compatible with the above remark of Bryant:

:::::Another important exception occurs when sliding takes place between two rough bodies in contact. The algebraic sum of the works done is different from zero, because, although the action and reaction are equal and opposite the velocities of the parts of the bodies in contact are different. Moreover, the work lost in the process does not increase the mutual potential energy of the system and there is no intervening medium between the bodies. Unless the lost energy can be accounted for in other ways, (as when friction produces electrification), it follows from the Principle of Conservation of Energy that the algebraic sum of the quantities of heat gained by the two systems is equal to the quantity of work lost by friction.

And with the above remark of Bridgman:

:::::We have the paradoxical result that the work received by the block from the pavement across the surface of separation is not equal to the work done on the pavement by the block.

This may be interpreted by saying that ordinary physical work done by a mechanism in the surroundings must sometimes be distinguished from thermodynamic work done on its surroundings by a thermodynamic system, as for example by a heat engine.

Perhaps it is, as Schroeder thinks, "strange to think that there is no "heat" entering your hands when you rub them together to warm them up." Perhaps rubbing one's hands together mainly has the effect of increasing the blood flow through the hands? It is not quite the same as rubbing two pieces of ice together.

Classical theoretical texts on thermodynamics define changes in the internal energy of a thermodynamic system strictly in terms of thermodynamic work done by a body enclosed in a container with adiabatic walls. In practice, perhaps most measurements of change in internal energy are done by calorimetry, as for example in Joule's paddlewheel experiment.

In thinking about thermodynamic work, one should bear in mind that thermodynamics is primarily about differences between thermodynamic states. This is why thermodynamic work is defined by differences between thermodynamic states. Thermodynamics is not simply about forces that an "agent" in the surroundings can exert to do work on the thermodynamic system. It is about forces that a thermodynamic system can exert to do work on its surroundings; such work can be received in the surroundings partly as work against friction, ''i.e.'', as heat.

It is perhaps worth remarking at this point that "chemical work", referring to such quantities as <math>\mu \ \text {d} N</math>, might safely be called 'chemical work-like change'. This is because "chemical work" is defined neither by mechanical forces that the surroundings exert on the system, nor by mechanical forces that the system exerts on the surroundings, but by changes in the state variables of the system.

Schroeder is a chemist who approaches thermodynamics as secondary to microscopic physics, apparently not a physicist who learnt thermodynamics as a macroscopic topic from Carnot, Joule, Mayer, Joule, Bryant, Carathéodory, and Planck. One may ask, which is better for Wikipedia, that it give priority to the thinking such as Fourier's, in terms of partial differential equations and the caloric theory, or that it reflect the knowledge of a cave man or pre-industrial coachman, that friction generates heat? I am inclined to bear in mind that Wikipedia is often enough quoted just from the first defining sentence of an article, as if that authoritatively settles a question.[[User:Chjoaygame|Chjoaygame]] ([[User talk:Chjoaygame#top|talk]]) 04:09, 29 June 2023 (UTC)

===Zemansky===
Zemansky & Dittman

On page 49, defining thermodynamic work, the authors wrote:
:::::Internal work cannot be discussed in macroscopic thermodynamics. Only the work that involves an interaction between a system and its surroundings is analyzed. When a system does external work, the changes that take place can be described by means of macroscopic quantities referring to the system as a whole, in which case the changes may be imagined to accompany the raising or lowering of a suspended weight, the winding or unwinding of a spring, or, in general, the alteration of the position or ''configuration'' of some external mechanical device. This may be regarded as the ultimate criterion as to whether external work is done or not. It will often be found convenient throughout the remainder of this book to describe the performance of external work in terms of, or in conjunction with, the operation of a mechanical device, such as a suspended weight or deformed spring. ''Unless otherwise indicated, the word work, unmodified by any adjective, will mean external work.''

On page 73, the authors wrote:
:::::Therefore, we adopt as a ''calorimetric'' definition the following: ''heat is that which is transferred between a system and its surroundings by virtue of a temperature difference only''.

On page 78, the authors wrote:
:::::Let us now imagine two different experiments performed on the same closed system. In one experiment, we measure the adiabatic work necessary to change the state of the system from <math>i</math> to <math>f</math>i to f in order to obtain <math>U_f-U_i</math>UJ - U;. In the other experiment, we cause the system to undergo the ''same'' change of state, so we have the same <math>U_f-U_i</math>u1 - U;, but the process is diathermic, and we measure the diathermic work <math>W</math>W done. The result of all such experiments is that the ''nonadiabatic work <math>W</math>W is'' '''not''' ''equal'' to <math>U_f-U_i</math>UJ - U;. In order that this result shall be consistent with the law of the conservation of energy, we are forced to conclude that energy has been transferred by means ''other than'' the performance of work. This energy, whose transfer between the system and its surroundings is required by the law of the conservation of energy and which has taken place only by virtue of the temperature difference between the system and its surroundings, is what we previously called heat. Therefore, we give the following as our ''thermodynamic'' definition of heat: ''When a closed system whose surroundings are at a different temperature and on which diathermic work may be done undergoes a process, then the energy transferred by non-mechanical means, equal to the difference between the change of internal energy and the diathermic work, is called heat''. Denoting heat by <math>Q</math>Q, we have

:::::::::::<math>Q=(U_f-U_i)-W\text{(diathermic)}</math>Q ==(U t- Ui)- W (diathermic),
:::::or
:::::::::::<math>U_f-U_i=Q+W,</math>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(4.2)
:::::here the sign convention has been adopted that <math>Q</math>Q is positive when it enters a system and negative when it leaves a system. Like internal energy and work, heat is measured in joules in the SI system. Equation (4.2) is known as the ''mathematical formulation of the first law of thermodynamics''.
:::::&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;It should be emphasized that the mathematical formulation of the first law contains three related ideas: (1) the existence of an internal-energy function; (2) the principle of the conservation of energy; (3) the definition of heat as ''energy'' in transit by virtue of a temperature difference.

On page 80, the authors wrote:
:::::We have seen earlier that the work done on or by a system is not a function of the coordinates of the system, so the calculation of the work depends on the path of integration by which the system is brought from the initial to the final state. The same situation applies to the heat transferred in or out of a system.

On page 81, the authors wrote:
:::::Imagine two systems: a system A in thermal contact with a system B, and the composite system is surrounded by adiabatic walls. For system A alone, u1 - ui ==Q+ w;
and for system B alone, u;-U/ ==Q I + w I.
Adding, we get
(UJ + U j)- (Ui + U/) ==Q+ Q1 + W + W 1•
Since (U1 + U j)- (Ui + U/) is the change in energy of the composite system and W + W 1 is the work done on the composite system, it follows that Q + Q1 is the heat transferred to the composite system. Since the composite system is surrounded by adiabatic walls,
and
Q+ Ql == 0,
Q ==-QI. (4.3)
In other words, within an adiabatic boundary, the heat lost (or gained) by system A is equal to the heat gained (or lost) by system B. Equation (4.3) is the basis of calculations of the intermediate temperature after a piece of hot metal has been dropped into a sample of cold water contained in a calori- meter. One is allowed to consider the quantity of heat to be conserved within the adiabatic container, but heat is generally not a conserved quantity, as Rumford's experiments showed.

==History of the Wikipedia article on heat==
===dated lead initial sentences or definitions===
Dated 22:48, 8 August 2001, edit https://en.wikipedia.org/enwiki/w/index.php?title=Heat&oldid=256829.
:::::In general heat tends to "flow" from a region of high [[temperature]] to a region of low temperature.
Comment: Heat is like a substance that flows. No mention of friction. Considers convection as a form of heat transfer.

Dated 15:50, 15 December 2005, edit https://en.wikipedia.org/enwiki/w/index.php?title=Heat&diff=prev&oldid=31477735.
:::::Heat is the process of transferring thermal energy.
Comment: a new approach, immediately undone.

Dated 09:36, 23 January 2006, edit https://en.wikipedia.org/enwiki/w/index.php?title=Heat&diff=next&oldid=36281983.
:::::Heat is a form of energy associated with the motion of atoms, molecules and other particles matter is composed of. It can be created by chemical reactions (such as burning,) nuclear reactions (such as fusion reactions taking place inside the Sun,) or electromagnetic dissipation (as in electric stoves.) Heat can be transferred between objects by radiation, conduction and convection. Temperature is used to indicate the level of elementary movement associated with heat. Heat can only be transferred between objects, or areas within an object, that have different temperatures.
Comment: No mention of friction. Muddled thinking: "can be created by chemical reactions"; I would say that chemical potential energy can convert into internal energy; internal energy can be transferred as heat.

Dated 08:42, 25 January 2006, https://en.wikipedia.org/enwiki/w/index.php?title=Heat&diff=next&oldid=36538164.
:::::Heat is a form of energy associated with the motion of atoms, molecules and other particles matter is composed of. It can be created by chemical reactions (such as burning,) nuclear reactions (such as fusion reactions taking place inside the Sun,) electromagnetic dissipation (as in electric stoves,) or mechanical dissipation (such as friction.) Heat can be transferred between objects by radiation, conduction and convection. Temperature is used to indicate the level of elementary movement associated with heat. Heat can only be transferred between objects, or areas within an object, that have different temperatures.
Comment: mentions creation of heat by friction.

Dated 01:54, 3 March 2006, https://en.wikipedia.org/enwiki/w/index.php?title=Heat&diff=next&oldid=41816652.
:::::In physics, heat is defined as energy in transit.
Comment: using the phrase "energy in transit".

Latest revision as of 08:18, 16 December 2024

Welcome!

Hello, Chjoaygame, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are some pages that you might find helpful:

I hope you enjoy editing here and being a Wikipedian! Please sign your messages on discussion pages using four tildes (~~~~); this will automatically insert your username and the date. If you need help, check out Wikipedia:Questions, ask me on my talk page, or ask your question on this page and then place {{helpme}} before the question. Again, welcome! RJFJR (talk) 15:55, 13 February 2009 (UTC)[reply]

User talk:Chjoaygame/archive 1

User talk:Chjoaygame/archive 2

User talk:Chjoaygame/archive 3

User talk:Chjoaygame/archive 4

______________________________

the Editor of Superior Knowledge

[edit]

At 18:41 on 2 June 2023, the Editor of Superior Knowledge demonstrated his superior knowledge by correcting

"Another kind of heat transfer is by radiation."

into

"Another kind of energy transfer is by radiation, performing work on the system."

This was done in the article Work (thermodynamics), not the article Heat. The edit was here https://en.wikipedia.org/enwiki/w/index.php?title=Work_%28thermodynamics%29&diff=1158226314&oldid=1158070006

There are two problems with this edit, the second of them characteristic of the Editor of Superior Knowledge. First, so far as I know, all reliable sources consider radiation to be a form of heat transfer, not of work. I find the edit to verge on the preposterous, but I didn't try to correct it because I have found it dangerous to try to correct the Editor of Superior Knowledge. Second, the edit left intact the source of the previous statement, Prevost, who thought in terms of radiation as heat transfer; he called radiation "free heat". This is characteristic of the editor of superior knowledge, not to bother to check references, but just to copy them, apparently unread. Yet the Editor of Superior Knowledge seems generally accepted as authoritative in these pages. Challenging him is often met savagely.Chjoaygame (talk) 01:33, 8 July 2023 (UTC)[reply]

unresolved anaphora

[edit]

Hi Editor @Nishidani ! I have marked the article https://en.wikipedia.org/wiki/Mbabaram_people with a query. You wrote "according to them". I am not quite sure whether "them" is the writers Windschuttle and Gittin, or whether it is the activists. I don't have an easy way to find out. I would be glad to learn which you meant.

Do you, perchance, have a reference for the proposition that Windschuttle and Gittins made that claim (In 2002, it was revived when Keith Windschuttle and Tom Gittin accused modern scholars in Australia of having suppressed the evidence)?Chjoaygame (talk) 11:35, 23 August 2023 (UTC)[reply]

Too complex for the lead

[edit]

While I do not disagree with the sense of your recent edit to the Friction page, I think the words used are far too complex for a lead, which should be at the level for a novice. I've worked in nanotribology for ~15 years, but would myself need to look up the exact words. Please rephrase in words a high-school student, for instance, will understand. Ldm1954 (talk) 16:48, 30 August 2023 (UTC)

Thank you for your comment. I will think about it.Chjoaygame (talk) 18:37, 30 August 2023 (UTC)[reply]
How about that?Chjoaygame (talk) 18:44, 30 August 2023 (UTC)[reply]

Definition of isentropic process

[edit]

Your input would be greatly appreciated at Talk:Isentropic process#Definition of isentropic fundamentally wrong. Dolphin (t) 05:52, 12 October 2023 (UTC)[reply]

Thank you for your kind invitation. I will try to think about it. It needs some searching for reliable sources. At present, there are some monstrous errors in this area, but I avoid trying to correct them because such an action seems only to make matters worse !! Chjoaygame (talk) 14:53, 13 October 2023 (UTC)[reply]

First law of thermodynamics

[edit]

@Dolphin51: Dear Dolphin51. Thank you for your attention to the article. There is a logical problem with the article on heat.

The current Wikpedia definition of heat is a reversal of decades of wikiconsensus. The current definition assumes temperature as defined before heat is defined. The more orthodox thermodynamic view is that thermodynamic temperature is defined in terms of the second law and entropy, after the first law definition of heat has been established without reference to temperature. The former wikiconsensus was that heat transfer is defined as the residual after thermodynamic work and matter transfer, for the first law. It is true and important that heat transfer is by "molecular" modes, but, from the point of view of thermodynamics, that is explanatory rather than fundamental, because thermodynamics is a macroscopic topic. It is also true that the current SI definition of temperature is not the same as the thermodynamic definition.

The present Wikipedia definition of heat is in terms of the eighteenth century caloric theory, and ignores that heat is generated by friction, such as in Thompson's cannon boring experiment and Joule's paddlewheel experiment, as well as being transferred by conduction and radiation. It isn't too easy to gather a massive majority of reliable sources on this point: only the better sources do it properly. I want to avoid rocking the boat on the topic, but I also don't want to just forget it.Chjoaygame (talk) 17:33, 31 January 2024 (UTC)[reply]

Thanks for your message. I see you have a problem with the science embedded in the article on First law of thermodynamics.
I don't have a problem with the science, but I do have a problem with some of the language used. Some of it looks like a PhD thesis or technical writing for a peer-reviewed journal. It appears inappropriate for an encyclopaedia with a very broad audience. It is a technical article so is expected to conform to the principles in WP:Make technical articles understandable. An example of this is the following sentence which I amended but you restored. It is found in Original statements: the "thermodynamic approach":
The primitive notion of heat was taken as empirically established, especially through calorimetry regarded as a subject in its own right, logically prior to thermodynamics.
If this sentence simply said "The primitive notion of heat was taken as empirically established prior to thermodynamics" I would understand it, and I would say it was well written. However, the sentence has an additional twelve words. Do these twelve words add a proportionate amount of information, meaning or value to the sentence? I must say no.
Consider the clause "especially through calorimetry regarded as a subject in its own right". What is a non-expert reader to make of this clause? I think a non-expert reader would go elsewhere at this point. It reminds me of early attempts at technical writing by PhD candidates who are still labouring under the misconception that the best sentences are long, convoluted and complex.
If the clause "especially ... in its own right" is genuinely relevant and important at this point in the paragraph, and if it reflects an idea found in reliable published sources, it can best be presented in its own sentence rather than clumsily inserted into an otherwise legitimate sentence about the early empirical origins of the concept of heat. Best wishes! Dolphin (t) 13:14, 1 February 2024 (UTC)[reply]
Thank you for your thoughtful comments. I didn't exactly restore the former version. I put in the word 'logically', because, as you noted, there was a gap in intelligibilty. But I agree that the wording is clumsy, and that the information perhaps needs two sentences. I agree that shorter sentences are better. I will have another try.Chjoaygame (talk) 01:48, 2 February 2024 (UTC)[reply]

Invitation to participate in a research

[edit]

Hello,

The Wikimedia Foundation is conducting a survey of Wikipedians to better understand what draws administrators to contribute to Wikipedia, and what affects administrator retention. We will use this research to improve experiences for Wikipedians, and address common problems and needs. We have identified you as a good candidate for this research, and would greatly appreciate your participation in this anonymous survey.

You do not have to be an Administrator to participate.

The survey should take around 10-15 minutes to complete. You may read more about the study on its Meta page and view its privacy statement .

Please find our contact on the project Meta page if you have any questions or concerns.

Kind Regards,

WMF Research Team

BGerdemann (WMF) (talk) 19:27, 23 October 2024 (UTC) [reply]

Reminder to participate in Wikipedia research

[edit]

Hello,

I recently invited you to take a survey about administration on Wikipedia. If you haven’t yet had a chance, there is still time to participate– we’d truly appreciate your feedback. The survey is anonymous and should take about 10-15 minutes to complete. You may read more about the study on its Meta page and view its privacy statement.

Take the survey here.

Kind Regards,

WMF Research Team

BGerdemann (WMF) (talk) 00:41, 13 November 2024 (UTC) [reply]

ArbCom 2024 Elections voter message

[edit]

Hello! Voting in the 2024 Arbitration Committee elections is now open until 23:59 (UTC) on Monday, 2 December 2024. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2024 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 00:24, 19 November 2024 (UTC)[reply]

Thermal energy

[edit]

Greetings Chjoaygame. In your recent edit at Thermal energy you inserted text saying that internal energy is The energy contained within a body of matter or radiation, specified by its entropy, volume and chemical constitution ...

Your explanation/definition implies that for a reader to comprehend the concept of internal energy, that reader must first understand the concepts of entropy and chemical composition!

As you know, internal energy assists us to work with the first law of thermodynamics, and entropy assists us to work with the second law. Your recent edit implies that to understand the first law, readers must have a prior understanding of the second law! Clearly not.

Please revisit your edit and make some necessary adjustments. The guidance at WP:Make technical articles understandable is highly relevant in this situation. Thanks. Dolphin (t) 23:32, 14 December 2024 (UTC)[reply]

Thank you, Dolphin51. You are right, you make a good point. My definition of internal energy does indeed use the concept of entropy. Not a smart move for the context. I will revisit.Chjoaygame (talk) 14:17, 15 December 2024 (UTC)[reply]
I have removed the specifying parameters. I was moved to make the edit by the previous version's talk of "total" energy. Total energy includes the potential energy with respect to an external field and the kinetic energy of the system moving as a whole. Even Wikipedia editors who feel that they know a lot can forget the point.
The statement of the first law is a bit tricky. It is mainly about the distinction between heat and thermodynamic work, and was originally for a closed system without transfer of matter. For the present day, I agree with Münster that it needs a connection with transfer of matter, which he writes as for the amalgamation of two isolated systems into one isolated system.
Please let me know if my revision needs further revision.Chjoaygame (talk) 14:36, 15 December 2024 (UTC)[reply]
Thanks Chjoaygame. I think your most recent edit has eliminated that particular problem.
In WP:Make technical articles understandable#Lead section it is emphasised that the lead section should be readily understood by as broad an audience as possible. With this in mind, I suggest that the text The energy contained within a body of matter or radiation, excluding the potential energy of the whole system with respect to an external force field, and excluding the kinetic energy of the system moving as a whole could be simplified by using a blue link to potential energy and omitting the expression “with respect to an external force field.” Similarly, a blue link could be used for kinetic energy.
By using this approach, the lead section is accessible to the very large audience of readers for whom potential energy simply means gravitational potential energy. For example, science students at the secondary school and High School level are introduced to potential energy, but it is gravitational PE. This large audience can be expected to immediately understand the potential energy of the whole system, but the extra words “with respect to an external force field” reduce the understandability for this audience rather than increase it. Considering we are referring to the lead section, I suggest these 7 extra words should be omitted. Dolphin (t) 23:23, 15 December 2024 (UTC)[reply]
Thank you again, Dolphin51, for your thoughtful and helpful care and patience. Your advice accepted. Please let me know if my revision needs further revision.Chjoaygame (talk) 06:05, 16 December 2024 (UTC)[reply]
Thanks Chjoaygame. The current version of the lead looks fine to me. Your revisions have met the objective! Dolphin (t) 08:18, 16 December 2024 (UTC)[reply]
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=User_talk:Chjoaygame&oldid=1263373281"