Potassium dichromate: Difference between revisions
No edit summary |
Hairy Dude (talk | contribs) →Uses: again; don't use US state abbreviations in this international encyclopedia Tags: Mobile edit Mobile web edit Advanced mobile edit |
||
(362 intermediate revisions by more than 100 users not shown) | |||
Line 1: | Line 1: | ||
{{Distinguish|Potassium chromate}} |
|||
{{Chembox new |
|||
{{chembox |
|||
| Name = Potassium dichromate |
|||
| verifiedrevid = 406377229 |
|||
| ImageFile = Potassium-dichromate-sample.jpg |
|||
| Name = Potassium dichromate |
|||
<!-- | ImageSize = 200px --> |
|||
| |
| ImageFile = Potassium-dichromate-sample.jpg |
||
| |
| ImageName = Potassium dichromate |
||
| ImageFile1 = Potassium-dichromate-unit-cell-3D-balls.png |
|||
| ImageName1 = Unit cell of potassium dichromate |
|||
| |
| ImageName1 = Unit cell of potassium dichromate |
||
| |
| IUPACName = Potassium dichromate(VI) |
||
| OtherNames = {{ubl|potassium bichromate |
|||
| Section1 = {{Chembox Identifiers |
|||
|bichromate of potash |
|||
| CASNo = 7778-50-9 |
|||
|dipotassium dichromate |
|||
| EINECS = 231-906-6 |
|||
|dichromic acid, dipotassium salt |
|||
| RTECS = HX7680000 |
|||
|chromic acid, dipotassium salt |
|||
|[[lópezite]]<ref>{{cite web|url=http://www.epa.gov/osw/hazard/wastetypes/wasteid/inorchem/docs/pot-dich.pdf|title=POTASSIUM DICHROMATE LISTING|publisher=US EPA|date=2015-07-23}}</ref> |
|||
}} |
|||
| Section1 = {{Chembox Identifiers |
|||
| CASNo = 7778-50-9 |
|||
| CASNo_Ref = {{cascite|correct|CAS}} |
|||
| UNII_Ref = {{fdacite|correct|FDA}} |
|||
| UNII = T4423S18FM |
|||
| ChemSpiderID_Ref = {{chemspidercite|correct|chemspider}} |
|||
| ChemSpiderID = 22910 |
|||
| ChEMBL = 1374101 |
|||
| SMILES = [K+].[K+].[O-][Cr](=O)(=O)O[Cr]([O-])(=O)=O |
|||
| StdInChI_Ref = {{stdinchicite|correct|chemspider}} |
|||
| StdInChI =1S/2Cr.2K.7O/q;;2*+1;;;;;;2*-1 |
|||
| StdInChIKey_Ref = {{stdinchicite|correct|chemspider}} |
|||
| StdInChIKey = KMUONIBRACKNSN-UHFFFAOYSA-N |
|||
| PubChem = 24502 |
|||
| EINECS = 231-906-6 |
|||
| RTECS = HX7680000 |
|||
| UNNumber = 3288 |
|||
}} |
}} |
||
| Section2 = {{Chembox Properties |
| Section2 = {{Chembox Properties |
||
| |
| Formula = K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> |
||
| |
| MolarMass = 294.185 g/mol |
||
| |
| Appearance = red-orange crystalline solid |
||
| Density = 2.676 g/cm<sup>3</sup>, solid |
| Odor = odorless |
||
| Density = 2.676 g/cm<sup>3</sup>, solid |
|||
| |
| Solubility = 4.9 g/100 mL (0 °C) <br> 13 g/100 mL (20 °C) <br> 102 g/100 mL (100 °C) |
||
| SolubleOther = insoluble in [[ethanol|alcohol]], [[acetone]]. |
|||
| MeltingPt = 398°C |
|||
| MeltingPtC = 398 |
|||
| BoilingPt = 500°C ''decomp.'' |
|||
| BoilingPtC = 500 |
|||
| BoilingPt_notes = decomposes |
|||
| RefractIndex = 1.738 |
|||
}} |
}} |
||
| Section3 = {{Chembox Structure |
| Section3 = {{Chembox Structure |
||
| |
| Coordination = [[Tetrahedral]] (for Cr) |
||
| |
| CrystalStruct = [[Triclinic]] (α-form, <241.6 °C) |
||
| |
|||
}} |
}} |
||
| Section4 = {{Chembox Thermochemistry |
| Section4 = {{Chembox Thermochemistry |
||
| |
| DeltaHf = −2033 kJ/mol |
||
| |
| Entropy = 291.2 J/(K·mol) |
||
| HeatCapacity = 219 J/mol<ref>{{cite book|pages=405|isbn=978-3-527-30524-7|date=2002|title=Thermochemical Data of Elements and Compounds|first1=M.|last1=Binnewies|first2=E.|last2=Milke|location=Weinheim|publisher=[[Wiley-VCH]]|edition=2}}</ref> |
|||
}} |
|||
| Section7 = {{Chembox Hazards |
|||
| MainHazards= carcinogenic,<ref>Like all compounds of hexavalent chromium, potassium dichromate is carcinogenic</ref> corrosive |
|||
| ExternalSDS = [http://www.inchem.org/documents/icsc/icsc/eics1371.htm ICSC 1371] |
|||
| GHSPictograms = {{GHS03}}{{GHS05}}{{GHS06}}{{GHS08}}{{GHS09}}<ref name="sigma">{{Sigma-Aldrich|id=675644|name=Chromium(VI) oxide|accessdate=2014-06-15}}</ref> |
|||
| HPhrases = |
|||
| PPhrases = |
|||
| NFPA-H = 4 |
|||
| NFPA-F = 0 |
|||
| NFPA-R = 1 |
|||
| NFPA-S = OX |
|||
| FlashPt = Non-flammable |
|||
| LD50 = 25 mg/kg (oral, rat)<ref>{{cite web|url=https://chem.nlm.nih.gov/chemidplus/rn/7778-50-9|title=ChemIDplus - 7778-50-9 - KMUONIBRACKNSN-UHFFFAOYSA-N - Potassium dichromate - Similar structures search, synonyms, formulas, resource links, and other chemical information|first=Michael|last=Chambers}}</ref> |
|||
}} |
}} |
||
| |
| Section8 = {{Chembox Related |
||
| OtherAnions = [[Potassium chromate]]<br />[[Potassium molybdate]]<br />[[Potassium tungstate]] |
|||
| MainHazards = Highly toxic<br />Carc. Cat. 1<br />Muta. Cat. 2<br />Repr. Cat. 2<br />Oxidant<br />Dangerous for<br />the environment |
|||
| OtherCations = [[Ammonium dichromate]]<br />[[Sodium dichromate]] |
|||
| RPhrases = {{R45}}, {{R46}}, {{R60}}, {{R61}},<br />{{R8}}, {{R21}}, {{R25}}, {{R26}}, {{R34}},<br />{{R42/43}}, {{R48/23}}, {{R50/53}} |
|||
| OtherCompounds = [[Potassium permanganate]] |
|||
| SPhrases = {{S53}}, {{S45}}, {{S60}}, {{S61}} |
|||
| FlashPt = Non-flammable |
|||
}} |
}} |
||
| Section8 = {{Chembox Related |
|||
| OtherAnions = [[Potassium chromate]]<br />[[Potassium molybdate]]<br />[[Potassium tungstate]] |
|||
| OtherCations = [[Ammonium dichromate]]<br />[[Sodium dichromate]] |
|||
| OtherCpds = [[Potassium permanganate]]}} |
|||
}} |
}} |
||
'''Potassium dichromate''', K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub>, is a common [[inorganic compound|inorganic]] chemical reagent, most commonly used as an [[oxidising agent]] in various laboratory and industrial applications. As with all [[hexavalent chromium]] compounds, it is potentially harmful to health and must be handled and disposed of appropriately. It is a crystalline ionic solid with a red colour. |
|||
'''Potassium dichromate''', {{chem2|K2Cr2O7|auto=1}}, is a common [[inorganic compound|inorganic]] chemical reagent, most commonly used as an [[oxidizing agent]] in various laboratory and industrial applications. As with all [[hexavalent chromium]] compounds, it is acutely and chronically harmful to health. It is a crystalline ionic solid with a very bright, red-orange color. The salt is popular in laboratories because it is not [[deliquescent]], in contrast to the more industrially relevant salt [[sodium dichromate]].<ref name=Ullmann>Gerd Anger, Jost Halstenberg, Klaus Hochgeschwender, Christoph Scherhag, Ulrich Korallus, Herbert Knopf, Peter Schmidt, Manfred Ohlinger, "Chromium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. {{doi|10.1002/14356007.a07_067}}</ref> |
|||
{{TOC limit|3}} |
|||
==Chemistry== |
==Chemistry== |
||
Potassium dichromate is an oxidizer. The oxidation half-equation can be seen: |
|||
===Production=== |
|||
Cr<sub>2</sub>O<sub>7</sub><sup>2−</sup>(aq) + 14H<sup>+</sup> + 6e<sup>−</sup> → 2Cr<sup>3+</sup>(aq) + 7H<sub>2</sub>O +1.36 V |
|||
Potassium dichromate is usually prepared by the reaction of [[potassium chloride]] on [[sodium dichromate]]. Alternatively, it can be also obtained from [[potassium chromate]] by roasting [[chromite]] ore with [[potassium hydroxide]]. It is soluble in water and in the dissolution process it ionizes: |
|||
{{block indent|K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> → 2 K<sup>+</sup> + {{chem|Cr|2|O|7|2−}}}} |
|||
{{block indent|{{chem|Cr|2|O|7|2−}} + H<sub>2</sub>O ⇌ 2 {{chem|CrO|4|2−}} + 2 H<sup>+</sup>}} |
|||
===Reaction=== |
|||
In organic chemistry, potassium dichromate is a mild oxidizer compared with [[potassium permanganate]]. It is used to [[organic redox reaction|oxidise]] [[alcohol]]s. It converts primary alcohols into aldehydes, or into carboxylic acids if heated under [[reflux]]. In contrast, with permanganate, carboxylic acids are the sole products. Secondary alcohols are converted into ketones — no further oxidation possible. For example, [[menthone]] may be prepared by oxidation of [[menthol]] with acidified dichromate.<ref>{{OrgSynth |title = ''l''-Menthone | author = L. T. Sandborn | collvol = 1 | collvolpages = 340 | prep = cv1p0340}}</ref> |
|||
Potassium dichromate is an oxidising agent in [[organic chemistry]], and is milder than [[potassium permanganate]]. It is used to [[organic redox reaction|oxidize]] [[Alcohol (chemistry)|alcohol]]s. It converts primary alcohols into aldehydes and, under more forcing conditions, into carboxylic acids. In contrast, potassium permanganate tends to give carboxylic acids as the sole products. Secondary alcohols are converted into [[ketone]]s. For example, [[menthone]] may be prepared by oxidation of [[menthol]] with acidified dichromate.<ref>{{OrgSynth |title = ''l''-Menthone | author = L. T. Sandborn | collvol = 1 | collvolpages = 340 | prep = cv1p0340}}</ref> Tertiary alcohols cannot be oxidized. |
|||
In an aqueous solution the color change exhibited can be used to test for distinguishing aldehydes from ketones. Aldehydes reduce dichromate from the +6 to the +3 [[oxidation state]], changing color from orange to green. This color change arises because the aldehyde can be oxidized to the corresponding carboxylic acid. A ketone will show no such change because it cannot be oxidized further, and so the solution will remain orange. |
|||
Tertiary alcohols are not able to be oxidized to give a [[carbonyl group]]. |
|||
When heated strongly, it decomposes with the evolution of oxygen. |
|||
In an aqueous solution the colour change exhibited can be used to test whether an aldehyde or ketone is present. When an aldehyde is present the chromium ions will be reduced from the +6 to the +3 [[oxidation state]], changing colour from orange to green. This is because the aldehyde can be further oxidised to the corresponding carboxylic acid. A ketone will show no such change because it cannot be oxidised further, and so the solution will remain orange. |
|||
{{block indent|4 K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> → 4 [[potassium chromate|K<sub>2</sub>CrO<sub>4</sub>]] + 2 [[chromium(III) oxide|Cr<sub>2</sub>O<sub>3</sub>]] + 3 O<sub>2</sub>}} |
|||
When an [[alkali]] is added to an orange-red solution containing dichromate ions, a yellow solution is obtained due to the formation of [[Chromate and dichromate|chromate]] ions ({{chem2|CrO4(2-)}}). For example, potassium chromate is produced industrially using [[potash]]: |
|||
{{block indent|K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> + [[potassium carbonate|K<sub>2</sub>CO<sub>3</sub>]] → 2 K<sub>2</sub>CrO<sub>4</sub> + CO<sub>2</sub>}} |
|||
The reaction is reversible. |
|||
Treatment with cold [[sulfuric acid]] gives red crystals of [[chromic anhydride]] (chromium trioxide, CrO<sub>3</sub>): |
|||
{{block indent|K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> + 2 H<sub>2</sub>SO<sub>4</sub> → 2 CrO<sub>3</sub> + 2 [[potassium bisulfate|KHSO<sub>4</sub>]] + H<sub>2</sub>O}} |
|||
On heating with concentrated acid, oxygen is evolved: |
|||
{{block indent|2 K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> + 8 H<sub>2</sub>SO<sub>4</sub> → 2 [[potassium sulfate|K<sub>2</sub>SO<sub>4</sub>]] + 2 [[chromium(III) sulfate|Cr<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub>]] + 8 H<sub>2</sub>O + 3 O<sub>2</sub>}} |
|||
==Uses== |
==Uses== |
||
Potassium dichromate has few major applications, as the sodium salt is dominant industrially. The main use is as a precursor to [[potassium chrome alum]], used in [[leather tanning]].<ref name=Ullmann/><ref>{{Cite journal|title=Footwear dermatitis|author1=M. Saha |author2=C. R. Srinivas |author3=S. D. Shenoy |author4=C. Balachandran |journal=Contact Dermatitis|volume=28|issue=5|pages=260–264|date=May 1993|doi=10.1111/j.1600-0536.1993.tb03428.x|pmid=8365123|s2cid=23159708 }}</ref> |
|||
Like other [[chromium(VI)]] compounds ([[chromium trioxide]], [[sodium dichromate]]), potassium dichromate may be used to prepare "[[chromic acid]]", which can be used for cleaning glassware and etching materials. |
|||
=== |
===Cleaning=== |
||
Like other [[chromium(VI)]] compounds ([[chromium trioxide]], [[sodium dichromate]]), potassium dichromate has been used to prepare "[[chromic acid]]" for cleaning glassware and etching materials. Because of safety concerns associated with hexavalent chromium, this practice has been largely discontinued. |
|||
Potassium dichromate has important uses in [[photography]] and in photographic [[screen printing]], where it is used as an oxidizing agent together with a strong mineral acid. |
|||
===Construction=== |
|||
[[Gum bichromate]] Printing was one of the very first stable photographic printing processes, dating back to about 1850. A solution of [[Gum Arabic]] and potassium dichromate, once applied to paper and dried, will harden when exposed to ultraviolet light. |
|||
It is used as an ingredient in [[cement]] in which it retards the setting of the mixture and improves its density and texture. This usage commonly causes [[contact dermatitis]] in [[construction workers]].<ref>{{Cite journal|title=Addition of ferrous sulfate to cement and risk of chromium dermatitis among construction workers|author1=Pekka Roto |author2=Hannele Sainio |author3=Timo Reunala |author4=Pekka Laippala |journal=Contact Dermatitis|volume=34|issue=1|pages=43–50|date=January 1996|doi=10.1111/j.1600-0536.1996.tb02111.x|pmid=8789225|s2cid=27027304 }}</ref> |
|||
===Photography and printing=== |
|||
''Chromium intensification'' uses potassium dichromate together with equal parts of concentrated [[hydrochloric acid]] diluted down to approximately 10% v/v to treat weak and thin negatives of black and white photograph roll. This solution reconverts the elemental silver particles in the film to [[silver chloride]]. After thorough washing and exposure to [[actinic]] light, the film can be redeveloped to its end-point yielding a stronger negative which is able to produce a more satisfactory print. |
|||
In 1839, [[Mungo Ponton]] discovered that paper treated with a solution of potassium dichromate was visibly tanned by exposure to sunlight, the discoloration remaining after the potassium dichromate had been rinsed out. In 1852, [[Henry Fox Talbot]] discovered that exposure to ultraviolet light in the presence of potassium dichromate hardened organic [[colloids]] such as [[gelatin]] and [[gum arabic]], making them less soluble. |
|||
These discoveries soon led to the [[carbon print]], [[gum bichromate]], and other photographic printing processes based on differential hardening. Typically, after exposure, the unhardened portion was rinsed away with warm water, leaving a thin relief that either contained a pigment included during manufacture or was subsequently stained with a dye. Some processes depended on the hardening only, in combination with the differential absorption of certain dyes by the hardened or unhardened areas. Because some of these processes allowed the use of highly stable dyes and pigments, such as [[carbon black]], prints with an extremely high degree of archival permanence and resistance to fading from prolonged exposure to light could be produced. |
|||
A potassium dichromate solution in [[sulfuric acid]] can be used to produce a reversal negative (i.e,. a positive transparency from a negative film). This is effected by developing a black and white film but allowing the development to proceed more or less to the end point. The development is then stopped by copious washing and the film then treated in the acid dichromate solution. This converts the [[silver]] metal to [[silver sulfate]], a compound that is insensitive to light. After thorough washing and exposure to actinic light, the film is developed again allowing the previously unexposed silver halide to be reduced to silver metal. |
|||
Dichromated colloids were also used as [[photoresist]]s in various industrial applications, most widely in the creation of metal printing plates for use in photomechanical printing processes. |
|||
The results obtained can be unpredictable, but sometimes excellent results are obtained producing images that would otherwise be unobtainable. This process can be coupled with [[solarisation]] so that the end product resembles a negative and is suitable for printing in the normal way. |
|||
''Chromium intensification'' or ''Photochromos'' uses potassium dichromate together with equal parts of concentrated [[hydrochloric acid]] diluted down to approximately 10% v/v to treat weak and thin negatives of black and white photograph roll. This solution reconverts the elemental silver particles in the film to [[silver chloride]]. After thorough washing and exposure to [[actinic]] light, the film can be redeveloped to its end-point yielding a stronger negative which is able to produce a more satisfactory print. |
|||
Cr<sup>VI</sup> compounds have the property of [[tanning]] animal [[protein]]s when exposed to strong light. This quality is used in photographic [[screen printing]]. In screen printing a fine screen of bolting silk of similar material that is required to be printed is then taped securely onto the surface of the screen and the whole thing exposed to strong light for a period - typically about half an hour in bright sunlight. When the design is removed, the gelatine on the screen is washed off with hot water. All the gelatine exposed to sun-light will have been hardened by the dichromate and will be retained on the screen leaving a precise mask of the required design which can be printed in the usual way. |
|||
A potassium dichromate solution in [[sulfuric acid]] can be used to produce a reversal negative (that is, a positive transparency from a negative film). This is effected by developing a black and white film but allowing the development to proceed more or less to the end point. The development is then stopped by copious washing and the film then treated in the acid dichromate solution. This converts the [[silver]] metal to [[silver sulfate]], a compound that is insensitive to light. After thorough washing and exposure to actinic light, the film is developed again allowing the previously unexposed silver halide to be reduced to silver metal. The results obtained can be unpredictable, but sometimes excellent results are obtained producing images that would otherwise be unobtainable. This process can be coupled with [[solarisation]] so that the end product resembles a negative and is suitable for printing in the normal way. |
|||
===Ethanol determination=== |
|||
The concentration of ethanol in a sample can be determined by [[back titration]] with acidified potassium dichromate. Adding reacting the sample with an excess of potassium dichromate, all ethanol is oxidized to [[acetic acid]]: |
|||
[[Cr(VI)]] compounds have the property of [[Tanning (leather)|tanning]] animal [[protein]]s when exposed to strong light. This quality is used in photographic [[screen-printing]]. |
|||
: C<sub>2</sub>H<sub>5</sub>OH + [O] → CH<sub>3</sub>COOH |
|||
In [[screen-printing]] a fine screen of bolting silk or similar material is stretched taut onto a frame similar to the way canvas is prepared before painting. A [[colloid]] sensitized with a dichromate is applied evenly to the taut screen. Once the dichromate mixture is dry, a full-size photographic positive is attached securely onto the surface of the screen, and the whole assembly exposed to strong light – times vary from 3 minutes to a half an hour in bright sunlight – hardening the exposed colloid. When the positive is removed, the unexposed mixture on the screen can be washed off with warm water, leaving the hardened mixture intact, acting as a precise mask of the desired pattern, which can then be printed with the usual [[screen-printing]] process. |
|||
The excess dichromate is determined by titration against [[sodium thiosulfate]]. Subtracting the amount of excess dichromate from the initial amount, gives the amount of ethanol present. Accuracy can be improved by calibrating the [[dichromate]] solution against a blank. |
|||
===Analytical reagent=== |
|||
One major application for this [[reaction]] is in old police [[brethalyzer]] tests. When alcohol vapor makes contact with the yellow dichromate-coated crystals, the [[color]] changes from yellow to green.The degree of the color change is directly related to the level of alcohol in the suspect's breath. |
|||
Because it is non-hygroscopic, potassium dichromate is a common reagent in classical "wet tests" in analytical chemistry. |
|||
====Ethanol determination==== |
|||
[[File:Potassium-dichromate-solution_cropped.png|thumb|Acidified solution of potassium dichromate]] |
|||
The concentration of ethanol in a sample can be determined by [[back titration]] with acidified potassium dichromate. Reacting the sample with an excess of potassium dichromate, all ethanol is oxidized to [[acetic acid]]: |
|||
{{block indent|CH<sub>3</sub>CH<sub>2</sub>OH + 2[O] → CH<sub>3</sub>COOH + H<sub>2</sub>O}} |
|||
Full reaction of converting ethanol to acetic acid: |
|||
{{block indent|3 C<sub>2</sub>H<sub>5</sub>OH + 2 K<sub>2</sub>Cr<sub>2</sub>O<sub>7</sub> + 8 H<sub>2</sub>SO<sub>4</sub> → 3 CH<sub>3</sub>COOH + 2 Cr<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub> + 2 K<sub>2</sub>SO<sub>4</sub> + 11 H<sub>2</sub>O}} |
|||
The excess dichromate is determined by titration against [[sodium thiosulfate]]. Adding the amount of excess dichromate from the initial amount, gives the amount of ethanol present. Accuracy can be improved by calibrating the [[dichromate]] solution against a blank. |
|||
One major application for this [[chemical reaction|reaction]] is in old police [[breathalyzer]] tests. When alcohol vapor makes contact with the orange dichromate-coated crystals, the [[color]] changes from [[Cr(VI)]] orange to Cr(III) green. The degree of the color change is directly related to the level of alcohol in the suspect's breath. |
|||
====Silver test==== |
|||
When dissolved in an approximately 35% [[nitric acid]] solution it is called Schwerter's solution and is used to test for the presence of various metals, notably for determination of silver purity. Pure silver will turn the solution bright red, [[sterling silver]] will turn it dark red, low grade [[coin silver]] (0.800 fine) will turn brown (largely due to the presence of copper which turns the solution brown) and even green for 0.500 silver. |
|||
Brass turns dark brown, copper turns brown, lead and tin both turn yellow while gold and palladium do not change. |
|||
====Sulfur dioxide test==== |
|||
Potassium dichromate paper can be used to test for [[sulfur dioxide]], as it turns distinctively from orange to green. This is typical of all redox reactions where hexavalent chromium is reduced to trivalent chromium. Therefore, it is not a conclusive test for sulfur dioxide. The final product formed is Cr<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub>. |
|||
{{block indent|{{chem2 | SO2 + K2Cr2O7 + 3H2SO4 -> K2SO4 + Cr2(SO4)3 + 3 H2O }}}} |
|||
===Wood treatment=== |
===Wood treatment=== |
||
Potassium dichromate is used to |
Potassium dichromate is used to stain certain types of wood by darkening the tannins in the wood. It produces deep, rich browns that cannot be achieved with modern color dyes. It is a particularly effective treatment on [[mahogany]].<ref>{{cite book |last=Jewitt |first=Jeff |title=Hand-Applied Finishes |year=1997 |publisher=Taunton Press |location=Newtown, Connecticut |isbn=978-1-56158-154-2 |url-access=registration |url=https://archive.org/details/handappliedfinis0000jewi }}</ref> |
||
==Natural occurrence== |
|||
[[File:Potassium dichromate (synthetic).jpg|thumb|A ~10 mm crystal of potassium dichromate in the same form as the mineral lópezite]] |
|||
Potassium dichromate occurs naturally as the rare [[mineral]] [[lópezite]]. It has only been reported as [[vug]] fillings in the [[nitrate]] deposits of the [[Atacama Desert]] of [[Chile]] and in the [[Bushveld igneous complex]] of [[South Africa]].<ref>{{cite web|url=http://www.mindat.org/min-2433.html|title=Lópezite: Lópezite mineral information and data.}}</ref> |
|||
==Safety== |
==Safety== |
||
[[File:Epikutanni-test.jpg|thumb|left|[[Patch test]]]] |
|||
Potassium dichromate is one of the most common [[culprits]] in causing [[chromium]] [[dermatitis]]. Chromium is highly likely to induce sensitization leading to [[dermatitis]], especially of the hand and fore-arms, which is chronic and difficult to treat. It is also toxic, with doses of approximately 100 mg/kg being fatal in rabbits and rodents.<ref>[http://physchem.ox.ac.uk/MSDS/PO/potassium_dichromate.html Safety data for potassium dichromate] HSci project</ref> |
|||
In 2005–06, potassium dichromate was the 11th-most-prevalent [[allergen]] in [[patch test]]s (4.8%).<ref>Zug KA, Warshaw EM, Fowler JF Jr, Maibach HI, Belsito DL, Pratt MD, Sasseville D, Storrs FJ, Taylor JS, Mathias CG, Deleo VA, Rietschel RL, Marks J. Patch-test results of the North American Contact Dermatitis Group 2005–2006. Dermatitis. 2009 May–Jun;20(3):149-60.</ref> |
|||
Potassium dichromate is one of the most common causes of chromium [[dermatitis]];<ref>{{cite book|title= Diseases of Skin|author=Farokh J. Master|year=2003|url=https://books.google.com/books?id=OBAnewDc9CYC|isbn=978-81-7021-136-5|page=223|publisher= B Jain Pub Pvt Ltd|location= New Delhi}}</ref> chromium is highly likely to induce sensitization leading to dermatitis, especially of the hand and forearms, which is chronic and difficult to treat. Toxicological studies have further illustrated its highly toxic nature. With rabbits and rodents, concentrations as low as 14 mg/kg have shown a 50% fatality rate amongst test groups.<ref>{{cite web | title = Potassium dichromate MSDS | publisher = Sigma-Aldrich | url = http://www.sigmaaldrich.com/catalog/product/aldrich/483044 | access-date = 2011-07-20}}</ref> Aquatic organisms are especially vulnerable if exposed, and hence responsible disposal according to the local environmental regulations is advised. |
|||
As with other Cr<sup>VI</sup> compounds, potassium dichromate is [[carcinogen]]ic and should be handled with gloves and appropriate health and safety protection. The compound is also [[corrosive]] and exposure may produce severe eye damage or blindness.<ref name="MSDS">{{cite web | publisher = ScienceLab.com | title = Potassium dichromate MSDS | url = http://www.sciencelab.com/xMSDS-Potassium_dichromate-9927404 | accessdate = 2008-01-28}}</ref> |
|||
As with other [[Cr(VI)]] compounds, potassium dichromate is [[carcinogen]]ic.<ref name="book100C">{{cite book |
|||
==Sulphur Dioxide== |
|||
|author = IARC |
|||
|author-link = International Agency for Research on Cancer |
|||
[[Potassium Dichromate]] (VI) [[paper]] can be used to [[test]] for [[Sulphur Dioxide]] as it turns distinctively from [[orange]] to [[green.]] |
|||
|title = Volume 100C: Arsenic, Metals, Fibres, and Dusts |
|||
|orig-year = 17-24 March 2009 |
|||
|url = https://publications.iarc.fr/_publications/media/download/3026/50ed50733f7d1152d91b30a803619022ef098d59.pdf |
|||
|access-date = 2020-01-05 |
|||
|date = 2012 |
|||
|isbn = 978-92-832-0135-9 |
|||
|quote = There is ''sufficient evidence'' in humans for the carcinogenicity of chromium (VI) compounds. Chromium (VI) compounds cause cancer of the lung. Also positive associations have been observed between exposure to Chromium (VI) compounds and cancer of the nose and nasal sinuses. There is ''sufficient evidence'' in experimental animals for the carcinogenicity of chromium (VI) compounds. Chromium (VI) compounds are ''carcinogenic to humans (Group 1)''. |
|||
|publisher = International Agency for Research on Cancer |
|||
|location = Lyon |
|||
}}</ref> The compound is also [[corrosive]] and exposure may produce severe eye damage or blindness.<ref name="MSDS">{{cite web | publisher = JT Baker| title = Potassium dichromate MSDS | url = http://hazard.com/msds/mf/baker/baker/files/p5719.htm}}</ref> Human exposure further encompasses impaired fertility. |
|||
==References== |
==References== |
||
Line 96: | Line 183: | ||
==External links== |
==External links== |
||
{{commonscat}} |
|||
*[http://www.ilo.org/public/english/protection/safework/cis/products/icsc/dtasht/_icsc13/icsc1371.htm International Chemical Safety Card 1371] |
|||
* [http://www.periodicvideos.com/videos/mv_potassium_dichromate.htm Potassium Dichromate] at ''[[The Periodic Table of Videos]]'' (University of Nottingham) |
|||
* [http://www.npi.gov.au/database/substance-info/profiles/25.html National Pollutant Inventory - Chromium VI and compounds fact sheet] |
|||
*[http://www. |
* [http://www.inchem.org/documents/icsc/icsc/eics1371.htm International Chemical Safety Card 1371] |
||
* [https://web.archive.org/web/20060203090143/http://www.npi.gov.au/database/substance-info/profiles/25.html National Pollutant Inventory – Chromium VI and compounds fact sheet] |
|||
*[http://ecb.jrc.it/ European Chemicals Bureau] |
|||
*[ |
* [https://www.cdc.gov/niosh/npg/npgd0138.html NIOSH Pocket Guide to Chemical Hazards] |
||
* [https://web.archive.org/web/20040701090041/http://www-cie.iarc.fr/htdocs/monographs/vol49/chromium.html IARC Monograph "Chromium and Chromium compounds"] |
|||
* [http://www.goldrecovery.us/goldrecovery/documents/reactions.pdf Gold refining article listing color change when testing metals with Schwerter's Solution] |
|||
{{Potassium compounds}} |
|||
{{Chromates and dichromates}} |
|||
{{Authority control}} |
|||
{{DEFAULTSORT:Potassium Dichromate}} |
|||
[[Category:Potassium compounds]] |
[[Category:Potassium compounds]] |
||
[[Category: |
[[Category:Dichromates]] |
||
[[Category:Photographic chemicals]] |
[[Category:Photographic chemicals]] |
||
[[Category:IARC Group 1 carcinogens]] |
[[Category:IARC Group 1 carcinogens]] |
||
[[Category:Light-sensitive chemicals]] |
|||
[[Category:Oxidizing agents]] |
|||
[[de:Kaliumdichromat]] |
|||
[[es:Dicromato de potasio]] |
|||
[[fr:Dichromate de potassium]] |
|||
[[it:Bicromato di potassio]] |
|||
[[nl:Kaliumdichromaat]] |
|||
[[ja:二クロム酸カリウム]] |
|||
[[pl:Dichromian(VI) potasu]] |
|||
[[ru:Дихромат калия]] |
|||
[[zh:重铬酸钾]] |
Latest revision as of 14:56, 4 November 2024
Names | |
---|---|
IUPAC name
Potassium dichromate(VI)
| |
Other names | |
Identifiers | |
3D model (JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.029.005 |
EC Number |
|
PubChem CID
|
|
RTECS number |
|
UNII | |
UN number | 3288 |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
K2Cr2O7 | |
Molar mass | 294.185 g/mol |
Appearance | red-orange crystalline solid |
Odor | odorless |
Density | 2.676 g/cm3, solid |
Melting point | 398 °C (748 °F; 671 K) |
Boiling point | 500 °C (932 °F; 773 K) decomposes |
4.9 g/100 mL (0 °C) 13 g/100 mL (20 °C) 102 g/100 mL (100 °C) | |
Solubility | insoluble in alcohol, acetone. |
Refractive index (nD)
|
1.738 |
Structure | |
Triclinic (α-form, <241.6 °C) | |
Tetrahedral (for Cr) | |
Thermochemistry | |
Heat capacity (C)
|
219 J/mol[2] |
Std molar
entropy (S⦵298) |
291.2 J/(K·mol) |
Std enthalpy of
formation (ΔfH⦵298) |
−2033 kJ/mol |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards
|
carcinogenic,[4] corrosive |
GHS labelling: | |
[3] | |
NFPA 704 (fire diamond) | |
Flash point | Non-flammable |
Lethal dose or concentration (LD, LC): | |
LD50 (median dose)
|
25 mg/kg (oral, rat)[5] |
Safety data sheet (SDS) | ICSC 1371 |
Related compounds | |
Other anions
|
Potassium chromate Potassium molybdate Potassium tungstate |
Other cations
|
Ammonium dichromate Sodium dichromate |
Related compounds
|
Potassium permanganate |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Potassium dichromate, K2Cr2O7, is a common inorganic chemical reagent, most commonly used as an oxidizing agent in various laboratory and industrial applications. As with all hexavalent chromium compounds, it is acutely and chronically harmful to health. It is a crystalline ionic solid with a very bright, red-orange color. The salt is popular in laboratories because it is not deliquescent, in contrast to the more industrially relevant salt sodium dichromate.[6]
Chemistry
[edit]Production
[edit]Potassium dichromate is usually prepared by the reaction of potassium chloride on sodium dichromate. Alternatively, it can be also obtained from potassium chromate by roasting chromite ore with potassium hydroxide. It is soluble in water and in the dissolution process it ionizes:
2O2−
7
2O2−
7 + H2O ⇌ 2 CrO2−
4 + 2 H+
Reaction
[edit]Potassium dichromate is an oxidising agent in organic chemistry, and is milder than potassium permanganate. It is used to oxidize alcohols. It converts primary alcohols into aldehydes and, under more forcing conditions, into carboxylic acids. In contrast, potassium permanganate tends to give carboxylic acids as the sole products. Secondary alcohols are converted into ketones. For example, menthone may be prepared by oxidation of menthol with acidified dichromate.[7] Tertiary alcohols cannot be oxidized.
In an aqueous solution the color change exhibited can be used to test for distinguishing aldehydes from ketones. Aldehydes reduce dichromate from the +6 to the +3 oxidation state, changing color from orange to green. This color change arises because the aldehyde can be oxidized to the corresponding carboxylic acid. A ketone will show no such change because it cannot be oxidized further, and so the solution will remain orange.
When heated strongly, it decomposes with the evolution of oxygen.
When an alkali is added to an orange-red solution containing dichromate ions, a yellow solution is obtained due to the formation of chromate ions (CrO2−4). For example, potassium chromate is produced industrially using potash:
The reaction is reversible.
Treatment with cold sulfuric acid gives red crystals of chromic anhydride (chromium trioxide, CrO3):
On heating with concentrated acid, oxygen is evolved:
Uses
[edit]Potassium dichromate has few major applications, as the sodium salt is dominant industrially. The main use is as a precursor to potassium chrome alum, used in leather tanning.[6][8]
Cleaning
[edit]Like other chromium(VI) compounds (chromium trioxide, sodium dichromate), potassium dichromate has been used to prepare "chromic acid" for cleaning glassware and etching materials. Because of safety concerns associated with hexavalent chromium, this practice has been largely discontinued.
Construction
[edit]It is used as an ingredient in cement in which it retards the setting of the mixture and improves its density and texture. This usage commonly causes contact dermatitis in construction workers.[9]
Photography and printing
[edit]In 1839, Mungo Ponton discovered that paper treated with a solution of potassium dichromate was visibly tanned by exposure to sunlight, the discoloration remaining after the potassium dichromate had been rinsed out. In 1852, Henry Fox Talbot discovered that exposure to ultraviolet light in the presence of potassium dichromate hardened organic colloids such as gelatin and gum arabic, making them less soluble.
These discoveries soon led to the carbon print, gum bichromate, and other photographic printing processes based on differential hardening. Typically, after exposure, the unhardened portion was rinsed away with warm water, leaving a thin relief that either contained a pigment included during manufacture or was subsequently stained with a dye. Some processes depended on the hardening only, in combination with the differential absorption of certain dyes by the hardened or unhardened areas. Because some of these processes allowed the use of highly stable dyes and pigments, such as carbon black, prints with an extremely high degree of archival permanence and resistance to fading from prolonged exposure to light could be produced.
Dichromated colloids were also used as photoresists in various industrial applications, most widely in the creation of metal printing plates for use in photomechanical printing processes.
Chromium intensification or Photochromos uses potassium dichromate together with equal parts of concentrated hydrochloric acid diluted down to approximately 10% v/v to treat weak and thin negatives of black and white photograph roll. This solution reconverts the elemental silver particles in the film to silver chloride. After thorough washing and exposure to actinic light, the film can be redeveloped to its end-point yielding a stronger negative which is able to produce a more satisfactory print.
A potassium dichromate solution in sulfuric acid can be used to produce a reversal negative (that is, a positive transparency from a negative film). This is effected by developing a black and white film but allowing the development to proceed more or less to the end point. The development is then stopped by copious washing and the film then treated in the acid dichromate solution. This converts the silver metal to silver sulfate, a compound that is insensitive to light. After thorough washing and exposure to actinic light, the film is developed again allowing the previously unexposed silver halide to be reduced to silver metal. The results obtained can be unpredictable, but sometimes excellent results are obtained producing images that would otherwise be unobtainable. This process can be coupled with solarisation so that the end product resembles a negative and is suitable for printing in the normal way.
Cr(VI) compounds have the property of tanning animal proteins when exposed to strong light. This quality is used in photographic screen-printing.
In screen-printing a fine screen of bolting silk or similar material is stretched taut onto a frame similar to the way canvas is prepared before painting. A colloid sensitized with a dichromate is applied evenly to the taut screen. Once the dichromate mixture is dry, a full-size photographic positive is attached securely onto the surface of the screen, and the whole assembly exposed to strong light – times vary from 3 minutes to a half an hour in bright sunlight – hardening the exposed colloid. When the positive is removed, the unexposed mixture on the screen can be washed off with warm water, leaving the hardened mixture intact, acting as a precise mask of the desired pattern, which can then be printed with the usual screen-printing process.
Analytical reagent
[edit]Because it is non-hygroscopic, potassium dichromate is a common reagent in classical "wet tests" in analytical chemistry.
Ethanol determination
[edit]The concentration of ethanol in a sample can be determined by back titration with acidified potassium dichromate. Reacting the sample with an excess of potassium dichromate, all ethanol is oxidized to acetic acid:
Full reaction of converting ethanol to acetic acid:
The excess dichromate is determined by titration against sodium thiosulfate. Adding the amount of excess dichromate from the initial amount, gives the amount of ethanol present. Accuracy can be improved by calibrating the dichromate solution against a blank.
One major application for this reaction is in old police breathalyzer tests. When alcohol vapor makes contact with the orange dichromate-coated crystals, the color changes from Cr(VI) orange to Cr(III) green. The degree of the color change is directly related to the level of alcohol in the suspect's breath.
Silver test
[edit]When dissolved in an approximately 35% nitric acid solution it is called Schwerter's solution and is used to test for the presence of various metals, notably for determination of silver purity. Pure silver will turn the solution bright red, sterling silver will turn it dark red, low grade coin silver (0.800 fine) will turn brown (largely due to the presence of copper which turns the solution brown) and even green for 0.500 silver. Brass turns dark brown, copper turns brown, lead and tin both turn yellow while gold and palladium do not change.
Sulfur dioxide test
[edit]Potassium dichromate paper can be used to test for sulfur dioxide, as it turns distinctively from orange to green. This is typical of all redox reactions where hexavalent chromium is reduced to trivalent chromium. Therefore, it is not a conclusive test for sulfur dioxide. The final product formed is Cr2(SO4)3.
Wood treatment
[edit]Potassium dichromate is used to stain certain types of wood by darkening the tannins in the wood. It produces deep, rich browns that cannot be achieved with modern color dyes. It is a particularly effective treatment on mahogany.[10]
Natural occurrence
[edit]Potassium dichromate occurs naturally as the rare mineral lópezite. It has only been reported as vug fillings in the nitrate deposits of the Atacama Desert of Chile and in the Bushveld igneous complex of South Africa.[11]
Safety
[edit]In 2005–06, potassium dichromate was the 11th-most-prevalent allergen in patch tests (4.8%).[12]
Potassium dichromate is one of the most common causes of chromium dermatitis;[13] chromium is highly likely to induce sensitization leading to dermatitis, especially of the hand and forearms, which is chronic and difficult to treat. Toxicological studies have further illustrated its highly toxic nature. With rabbits and rodents, concentrations as low as 14 mg/kg have shown a 50% fatality rate amongst test groups.[14] Aquatic organisms are especially vulnerable if exposed, and hence responsible disposal according to the local environmental regulations is advised.
As with other Cr(VI) compounds, potassium dichromate is carcinogenic.[15] The compound is also corrosive and exposure may produce severe eye damage or blindness.[16] Human exposure further encompasses impaired fertility.
References
[edit]- ^ "POTASSIUM DICHROMATE LISTING" (PDF). US EPA. 2015-07-23.
- ^ Binnewies, M.; Milke, E. (2002). Thermochemical Data of Elements and Compounds (2 ed.). Weinheim: Wiley-VCH. p. 405. ISBN 978-3-527-30524-7.
- ^ Sigma-Aldrich Co., Chromium(VI) oxide. Retrieved on 2014-06-15.
- ^ Like all compounds of hexavalent chromium, potassium dichromate is carcinogenic
- ^ Chambers, Michael. "ChemIDplus - 7778-50-9 - KMUONIBRACKNSN-UHFFFAOYSA-N - Potassium dichromate - Similar structures search, synonyms, formulas, resource links, and other chemical information".
- ^ a b Gerd Anger, Jost Halstenberg, Klaus Hochgeschwender, Christoph Scherhag, Ulrich Korallus, Herbert Knopf, Peter Schmidt, Manfred Ohlinger, "Chromium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. doi:10.1002/14356007.a07_067
- ^ L. T. Sandborn. "l-Menthone". Organic Syntheses; Collected Volumes, vol. 1, p. 340.
- ^ M. Saha; C. R. Srinivas; S. D. Shenoy; C. Balachandran (May 1993). "Footwear dermatitis". Contact Dermatitis. 28 (5): 260–264. doi:10.1111/j.1600-0536.1993.tb03428.x. PMID 8365123. S2CID 23159708.
- ^ Pekka Roto; Hannele Sainio; Timo Reunala; Pekka Laippala (January 1996). "Addition of ferrous sulfate to cement and risk of chromium dermatitis among construction workers". Contact Dermatitis. 34 (1): 43–50. doi:10.1111/j.1600-0536.1996.tb02111.x. PMID 8789225. S2CID 27027304.
- ^ Jewitt, Jeff (1997). Hand-Applied Finishes. Newtown, Connecticut: Taunton Press. ISBN 978-1-56158-154-2.
- ^ "Lópezite: Lópezite mineral information and data".
- ^ Zug KA, Warshaw EM, Fowler JF Jr, Maibach HI, Belsito DL, Pratt MD, Sasseville D, Storrs FJ, Taylor JS, Mathias CG, Deleo VA, Rietschel RL, Marks J. Patch-test results of the North American Contact Dermatitis Group 2005–2006. Dermatitis. 2009 May–Jun;20(3):149-60.
- ^ Farokh J. Master (2003). Diseases of Skin. New Delhi: B Jain Pub Pvt Ltd. p. 223. ISBN 978-81-7021-136-5.
- ^ "Potassium dichromate MSDS". Sigma-Aldrich. Retrieved 2011-07-20.
- ^ IARC (2012) [17-24 March 2009]. Volume 100C: Arsenic, Metals, Fibres, and Dusts (PDF). Lyon: International Agency for Research on Cancer. ISBN 978-92-832-0135-9. Retrieved 2020-01-05.
There is sufficient evidence in humans for the carcinogenicity of chromium (VI) compounds. Chromium (VI) compounds cause cancer of the lung. Also positive associations have been observed between exposure to Chromium (VI) compounds and cancer of the nose and nasal sinuses. There is sufficient evidence in experimental animals for the carcinogenicity of chromium (VI) compounds. Chromium (VI) compounds are carcinogenic to humans (Group 1).
- ^ "Potassium dichromate MSDS". JT Baker.
External links
[edit]- Potassium Dichromate at The Periodic Table of Videos (University of Nottingham)
- International Chemical Safety Card 1371
- National Pollutant Inventory – Chromium VI and compounds fact sheet
- NIOSH Pocket Guide to Chemical Hazards
- IARC Monograph "Chromium and Chromium compounds"
- Gold refining article listing color change when testing metals with Schwerter's Solution