Policeman (laboratory): Difference between revisions

Content deleted Content added

Inline

Latest revision as of 15:52, 10 June 2024

A policeman is a hand-held flexible natural-rubber or plastic scraper. The common type of it is attached to a glass rod and used in chemical laboratories to transfer residues of precipitate or solid on glass surfaces when performing gravimetric analysis. This equipment works well under gentle, delicate and precise requirement. A policeman also comes in various sizes, shapes, and types. Some of them come in one-piece flexible plastic version and some in stainless. The origin of the policeman and its name cannot be identified for sure but some clues led back to the 19th century from German chemist Carl Remigius Fresenius.

Structure

A policeman is generally a flexible natural-rubber blade attached to a glass rod, which is typically 5 mm to 6 mm diameter and 150 mm long. However, it also comes in various sizes and shapes depending on its uses. The rubber material provides chemical resistance. In some designs, there is no glass rod, but instead the whole item is made of plastic or stainless steel and is shaped into a spatula or scraper shape at the end.

Uses

The use of a plastics policeman for raking the precipitate on the beaker wall

A policeman can be used for cleaning the inside of glassware, or for getting the last bit of precipitate out of a vessel. Especially in chemical laboratories it is often used to transfer residues of precipitate or solid on glass surfaces when performing the gravimetric analysis.
It also used in biological laboratories, to transfer tissue culture cells from a plate to a suspension. It feature is to prevent the glass rod from scratching or breaking glassware.

Origin

There is no answer on where the name "policeman" comes from, though it may be related to the function of the instrument.

It is like the police in that it protects the beaker from scratching.^[1]
It is like the police in that it gathers up any stray or escaped particles of precipitate on the beaker wall.^[1]

In chemistry, gravimetric analysis is essential. After precipitating the chemical element of interest, successfully transferring all of the precipitate to the filtration funnel for separation from the supernatant liquid is required. This can be done by using a stream of distilled water from a wash bottle. This is less effective because dense precipitates may become compacted at the bottom of the beaker, while light precipitates may be dispersed on the walls of the beaker. A glass rod can be used to remove the precipitate but this risks poking a hole in the bottom of the beaker or scratching the beaker wall. In the 19th century, German chemist, Carl Remigius Fresenius suggested a solution to overcome this problem using a device similar to the rubber policeman.^[1]

Then rubber policeman was also recorded in 1910 edition of J. C. Olsen's textbook of quantitative analysis that states "particles adhering to the glass must be removed by means of a so-called policeman, which is made by inserting the end of a rather thick large-sized glass stirring-rod into a short piece of rubber tubing. The rubber tube should be left protruding slightly beyond the end of the glass tube and sealed together with a little bicycle [i.e. rubber] cement."^[1]

However, it seems that Olsen has nothing to do with the mass production and sales of this invention. Instead, Oesper Collections catalog indicated that Henry Heil Company of St. Louis sold policemen as early as 1904.^[1]

The second speculation is the most likely the one since in the 1937 edition of Hackh's Chemical Dictionary "platinum policeman," defined as "a platinum-iridium claw that fits over a glass rod and is used to hold a quantitative filter during ignition,"^[2] which the purpose of the policeman was to prevent the escape of stray filter paper from the crucible during the ignition process that causes thermal updrafts from the burner. Therefore, for policeman, it likely means to prevent the escape of stray precipitate.

References

^ ^a ^b ^c ^d ^e Jensen, William B (2008). "The Origin of the Rubber Policeman" (PDF). Journal of Chemical Education. 85 (776): 776. Bibcode:2008JChEd..85..776J. doi:10.1021/ed085p776. Retrieved 13 October 2017.
^ Hackh, Ingo Waldemar Dagobert; Grant, Julius (1937). Hackh's chemical dictionary: containing the words generally used in chemistry. The University of California: P. Blakiston's son & co., inc. p. 564.

[Jensen-1] Jensen, William B (2008). "The Origin of the Rubber Policeman" (PDF). Journal of Chemical Education. 85 (776): 776. Bibcode:2008JChEd..85..776J. doi:10.1021/ed085p776. Retrieved 13 October 2017.

[2] Hackh, Ingo Waldemar Dagobert; Grant, Julius (1937). Hackh's chemical dictionary: containing the words generally used in chemistry. The University of California: P. Blakiston's son & co., inc. p. 564.

[1]

[2]

@@ Line 1: / Line 1: @@
+{{Short description|Plastic scraper}}
 [[Image:Rubberpoliceman.jpg|right|thumb|Rubber policemen]]
+[[File:Plastic Policeman.jpg|thumb|A type of policeman which is made of plastic and is formed into spatula shapes at the ends.]]
-A '''policeman''' is a hand-held flexible natural-rubber or plastic scraper. The common type of it attached to a glass rod used in [[chemical]] [[laboratories]] to transfer residues of precipitate or solid on glass surfaces when performing [[gravimetric analysis]]. This equipment effectively works well under the gentle, delicate and precise requirement. A policeman also comes in various sizes and types. Some of it comes in one-piece flexible plastic versions. They are not the same as rubber scrapers.  The origin of rubber policeman and its name cannot be identified for sure but some clues led back to the 19th century from the chemist named Carl Remigius Fresenius.
+A '''policeman''' is a hand-held flexible natural-rubber or plastic scraper. The common type of it is attached to a glass rod and used in [[chemical]] [[laboratories]] to transfer residues of [[precipitate]] or solid on glass surfaces when performing [[gravimetric analysis]]. This equipment works well under gentle, delicate and precise requirement. A policeman also comes in various sizes, shapes, and types. Some of them come in one-piece flexible plastic version and some in stainless. The origin of the policeman and its name cannot be identified for sure but some clues led back to the 19th century from German chemist [[Carl Remigius Fresenius]].
-== Origin ==
-In chemistry, [[gravimetric analysis]] is essential. After precipitating the chemical element of interest, successfully transfer all of the [[precipitate]] to the [[filtration]] funnel for separation from the supernatant liquid is required. Normally, it used to be done by using a stream of distilled water from a [[wash bottle]]. However, such a way is ineffective because dense precipitates may become compacted at the bottom of the beaker or, in the case of light precipitates, may become dispersed on the walls of the beaker. Therefore, by using glass rod to take them off may result in poking a hole in the bottom of the beaker or scratching of the beaker wall. <br>
-In the 19th-century, German chemist, [[Carl Remigius Fresenius]] suggest the solution to overcome this problem.<br>
-Then rubber policeman also recorded in 1910 edition of J. C. Olsen’s textbook of quantitative analysis that states <br>
- "''... particles adhering to the glass must be removed by means of a so-called policeman, which is made by inserting the end of a rather thick large-sized glass stirring-rod into a short piece of rubber tubing. The rubber tube should be left protruding slightly beyond the end of the glass tube and sealed together with a little bicycle [i.e. rubber] cement.''" <br>
-However, it seemed that Olsen has nothing to do with the production and sales of this invention. Instead, Oesper Collections catalog indicated that rubber policemen sold by the Henry Heil Company of St. Louis as early as 1904.<br>
-Unfortunately, no one can answer where the name "rubber policeman" comes from. Nevertheless, there are two assumptions:<br>
-* It likes police that protected the beaker from scratching.
-* It likes the police that gathering up any stray or escaped particles of precipitate on the beaker wall.
-The second speculation is the most likely one since in the 1937 edition of Hackh’s Chemical Dictionary  “platinum policeman,” defined as “a platinum-iridium claw that fits over a glass rod and is used to hold a quantitative filter during ignition,” which the purpose of the policeman was to prevent the escape of stray filter paper from the crucible during the ignition process that causes from thermal updrafts from the burner. Therefore, for rubber policeman, it likely means to prevent the escape of stray precipitate.<ref>{{cite journal|last1=Jensen|first1=William B|title=The Origin of the Rubber Policeman|journal=Journal of Chemical Education|date=2008|volume=85|issue=776|doi=10.1021/ed085p776|url=http://www.che.uc.edu/jensen/w.%20b.%20jensen/reprints/146.%20Rubber%20Policeman.pdf|accessdate=13 October 2017}}</ref>
 == Structure ==
+[[File:Stainless laboratory spatula.jpg|thumb|A picture of stainless steel laboratory policeman.]]
-A rubber policeman is generally a flexible natural-rubber attached to a 5mm and 6mm diameter of 15 cm long glass rod. However, it also comes in various size and shapes depending on its uses. This rubber also provides a chemical resistant. In some of the designs, there is no need for a glass rod, instead, the whole piece makes of plastic or rubber and at the end, it has either spatula or scarpers shape.
+A policeman is generally a flexible natural-rubber blade attached to a glass rod, which is typically 5 mm to 6 mm diameter and 150 mm long. However, it also comes in various sizes and shapes depending on its uses. The rubber material provides chemical resistance. In some designs, there is no glass rod, but instead the whole item is made of plastic or stainless steel and is shaped into a spatula or scraper shape at the end.
-[[File:Plastic Policeman.jpg|thumb|Type of the policeman in which the whole piece makes of plastic and at the two ends, there are spatula shapes.]]
 == Uses ==
-Rubber policeman can be used for cleaning the inside of glassware, or for getting the last bit of precipitate out of a vessel. Especially in chemical laboratories it often use to transfer residues of precipitate or solid on glass surfaces when performing the gravimetric analysis. <br>
+[[File:The use of a plastic policeman.webm|thumb|The use of a plastics policeman for raking the precipitate on the beaker wall]]A policeman can be used for cleaning the inside of glassware, or for getting the last bit of precipitate out of a vessel. Especially in chemical laboratories it is often used to transfer residues of precipitate or solid on glass surfaces when performing the gravimetric analysis. <br>It also used in biological laboratories, to transfer tissue culture cells from a plate to a suspension. It feature is to prevent the glass rod from scratching or breaking glassware.
-It also used in biological laboratories, to transfer tissue culture cells from a plate to a suspension. Their feature is to prevent the glass rod from scratching or breaking glassware.
-== Applications ==
+== Origin ==
+There is no answer on where the name "policeman" comes from, though it may be related to the function of the instrument.
-These are some example of the experiment that uses rubber policeman.
+* It is like the police in that it protects the beaker from scratching.<ref name="Jensen">{{cite journal |last1=Jensen |first1=William B |author1-link=William B. Jensen |date=2008 |title=The Origin of the Rubber Policeman |url=http://www.che.uc.edu/jensen/w.%20b.%20jensen/reprints/146.%20Rubber%20Policeman.pdf |journal=Journal of Chemical Education |volume=85 |issue=776 |page=776 |bibcode=2008JChEd..85..776J |doi=10.1021/ed085p776 |access-date=13 October 2017}}</ref>
-=== Gravimetric Analysis of a Soluble Chloride ===
+* It is like the police in that it gathers up any stray or escaped particles of precipitate on the beaker wall.<ref name="Jensen" />
-The experiment intends to introduce the student to the technique called Gravimetric Analysis by using the Chloride as an example. This technique helps determine amount of an analyte by the measurement of mass.<ref>{{cite web|title=Gravimetric Analysis|url=http://www.wiredchemist.com/chemistry/instructional/laboratory-tutorials/gravimetric-analysis|website=WeirdChemist|accessdate=13 October 2017}}</ref><ref>{{cite web|title=Gravimetric Analysis of a Soluble Chloride|url=http://www.chem.uky.edu/courses/che226/Labs/020-Gravim_Cl.pdf|publisher=University of Kentucky|accessdate=13 October 2017}}</ref>
+In chemistry, [[gravimetric analysis]] is essential. After precipitating the chemical element of interest, successfully transferring all of the [[precipitate]] to the [[filtration]] funnel for separation from the supernatant liquid is required. This can be done by using a stream of distilled water from a [[wash bottle]]. This is less effective because dense precipitates may become compacted at the bottom of the beaker, while light precipitates may be dispersed on the walls of the beaker. A glass rod can be used to remove the precipitate but this risks poking a hole in the bottom of the beaker or scratching the beaker wall. In the 19th century, German chemist, [[Carl Remigius Fresenius]] suggested a solution to overcome this problem using a device similar to the rubber policeman.<ref name="Jensen" />
+Then rubber policeman was also recorded in 1910 edition of J. C. Olsen's textbook of quantitative analysis that states ''"''particles adhering to the glass must be removed by means of a so-called policeman, which is made by inserting the end of a rather thick large-sized glass stirring-rod into a short piece of rubber tubing. The rubber tube should be left protruding slightly beyond the end of the glass tube and sealed together with a little bicycle [i.e. rubber] cement."''<ref name="Jensen" />''
-=== Isolation of Casein from Milk ===
-The rubber policeman can be used for stirring the mixture in the fragile containers and for draining the solid substance. As in the experiment called Isolation of Casein from milk which has the objective to isolate chemical substances found in milk. Rubber policeman uses to stir the mixture of milk and acetic acid. Then it uses for push the casein up onto the side of the beaker so that most liquid drains from the solid.<ref>{{cite book|last1=Pavis|first1=Donald L.|last2=Lampman|first2=Gary M.|last3=Kris|first3=George S.|title=Introduction to Organic Laboratory Techniques: A Small Scale Approach|date=2005|publisher=Davis Haris|location=Belmount, CA, USA|isbn=0534408338|page=464|edition=2|accessdate=13 October 2017}}</ref>
+However, it seems that Olsen has nothing to do with the mass production and sales of this invention. Instead, Oesper Collections catalog indicated that Henry Heil Company of St. Louis sold policemen as early as 1904.<ref name="Jensen" />
-=== Cell Lysates Preparation ===
-In the cell lysates preparation, it requires a very gentle procedure for preparing them after [[transfection]] of cells growing in well plates. The rubber policeman which is soft and flexible uses for a scrape or detach those cells for transferring or observe.
+The second speculation is the most likely the one since in the 1937 edition of Hackh's Chemical Dictionary "platinum policeman," defined as "a platinum-iridium claw that fits over a glass rod and is used to hold a quantitative filter during ignition,"<ref>{{cite book |last1=Hackh |first1=Ingo Waldemar Dagobert |title=Hackh's chemical dictionary: containing the words generally used in chemistry |last2=Grant |first2=Julius |date=1937 |publisher=P. Blakiston's son & co., inc. |location=The University of California |page=564}}</ref> which the purpose of the policeman was to prevent the escape of stray filter paper from the crucible during the ignition process that causes thermal updrafts from the burner. Therefore, for policeman, it likely means to prevent the escape of stray precipitate.
-<ref>{{cite book|last1=Deb|first1=Sumitra|last2=Deb|first2=Swati Palit|title=Methods in Molecular Biology|date=2003|publisher=Humana Press Inc.|location=Totowa, New Jersey|isbn=1588291065|page=98|accessdate=13 October 2017}}</ref>
 == See also ==
 * [[Glass rod]]
 * [[Spatula]]
-* [[Beaker]]
+* [[Beaker (glassware)|Beaker]]
-=References=
+==References==
 {{Reflist}}
+{{Laboratory equipment}}
 {{DEFAULTSORT:Rubber Policeman}}
 [[Category:Laboratory equipment]]
+[[Category:Microbiology equipment]]
+[[Category:Chemical equipment]]