Jump to content

Silver nitrate: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
→Safety: effected => affected
Line 50: Line 50:
Other silver salts with [[non-coordinating anions]], namely [[silver tetrafluoroborate]] and [[silver hexafluorophosphate]] are used for more demanding applications.
Other silver salts with [[non-coordinating anions]], namely [[silver tetrafluoroborate]] and [[silver hexafluorophosphate]] are used for more demanding applications.


Similarly, this reaction is used in [[analytical chemistry]] to confirm the presence of [[chloride]], [[bromide]], or [[iodide]] [[ions]] can be tested by adding silver nitrate solution. Samples are typically acidifed with dilute nitric acid to remove interfering ions, e.g. [[carbonate]] ions and [[sulfide]] ions. This step avoids confusion of [[silver sulfide]] or [[silver carbonate]] precipitates with that of silver halides. The color of precipitate varies with the halide: white ([[silver chloride]]), pale yellow/cream ([[silver bromide]]), yellow ([[silver iodide]]). AgBr and especially AgI [[photochemistry|photo-decompose]] to the metal, as evidence by a grayish color on exposed samples.danielle
Similarly, this reaction is used in [[analytical chemistry]] to confirm the presence of [[chloride]], [[bromide]], or [[iodide]] [[ions]] can be tested by adding silver nitrate solution. Samples are typically acidifed with dilute nitric acid to remove interfering ions, e.g. [[carbonate]] ions and [[sulfide]] ions. This step avoids confusion of [[silver sulfide]] or [[silver carbonate]] precipitates with that of silver halides. The color of precipitate varies with the halide: white ([[silver chloride]]), pale yellow/cream ([[silver bromide]]), yellow ([[silver iodide]]). AgBr and especially AgI [[photochemistry|photo-decompose]] to the metal, as evidence by a grayish color on exposed samples.


===Organic synthesis===
===Organic synthesis===

Revision as of 06:21, 5 December 2008

Template:Chembox new Silver nitrate, also known as lunar caustic, is a soluble chemical compound with chemical formula AgNO3. This compound is a versatile precursor to many other silver compounds, such as those used in photography. Comparatively, it is far less sensitive to light than the halides. It is called lunar caustic because silver was called luna by the ancient alchemists.[1]

In solid silver nitrate, the silver ions are three-coordinated in a trigonal planar arrangement.[2]

Preparation

Silver nitrate crystals can be produced by dissolving silver metal in a solution of nitric acid and evaporating the solution. The equation is as follows:

4 HNO3 (aq) + 3 e - → 3 NO3- (aq) + 2 H2O (l) + NO (g)
3 Ag (s) → 3 Ag+ (aq) + 3 e -
3 Ag (s) + 4 HNO3 (aq) → 3 AgNO3 (aq) + 2 H2O (l) + NO (g)

Applications

Precursor to other silver compounds

Silver nitrate is the least expensive salt of silver; it offers several other advantages as well. It is non-hygroscopic, in contrast to silver fluoroborate and silver perchlorate. It is relatively stable to light. Finally it dissolves in numerous solvents. The nitrate can be easily replaced by other ligands, rendering AgNO3 versatile. Treatment with solutions of halide ions gives a precipitate of AgX (X = Cl, Br, I). When making photographic film, silver nitrate is treated with halide salts of sodium or potassium to form insoluble silver halide in situ in photographic gelatin, which is then applied to strips of tri-acetate or polyester. Similarly, silver nitrate is used to prepare some silver-based explosives, such as the fulminate, azide, or acetylide, through a precipitation reaction.

Treatment of silver nitrate with base gives silver oxide:[3]

2 AgNO3 + 2 NaOH → Ag2O + 2 NaNO3 + H2O

Halide abstraction

The silver cation quickly and effectively irreversibly reacts with halide anions to produce the insoluble silver halide. This reaction is commonly used in inorganic chemistry to abstract the halide as the insoluble silver salt:


Other silver salts with non-coordinating anions, namely silver tetrafluoroborate and silver hexafluorophosphate are used for more demanding applications.

Similarly, this reaction is used in analytical chemistry to confirm the presence of chloride, bromide, or iodide ions can be tested by adding silver nitrate solution. Samples are typically acidifed with dilute nitric acid to remove interfering ions, e.g. carbonate ions and sulfide ions. This step avoids confusion of silver sulfide or silver carbonate precipitates with that of silver halides. The color of precipitate varies with the halide: white (silver chloride), pale yellow/cream (silver bromide), yellow (silver iodide). AgBr and especially AgI photo-decompose to the metal, as evidence by a grayish color on exposed samples.

Organic synthesis

Silver nitrate is used in many ways in organic synthesis, e.g. for deprotection and oxidations. Ag+ binds alkenes reversibly, and silver nitrate has been used to separate mixtures of alkenes by selective absorption. The resulting adduct can be decomposed with ammonia to release the free alkene.[4]

Biology

In histology, silver nitrate is used for silver staining, for demonstrating proteins and nucleic acids. For this reason it is also used to demonstrate proteins in PAGE gels. It is also used as a stain in scanning electron microscopy[citation needed].

Medicine

Silver salts have antiseptic properties. Until the development and widespread adoption of antibiotics, AgNO3 used to be dropped into newborn babies' eyes at birth to prevent contraction of gonorrhoea from the mother. Eye infections and blindness of newborns was reduced by this method; incorrect dosage, however, could cause blindness in extreme cases. This protection was first used by Credé in 1881.[5][6][7] Fused silver nitrate, shaped into sticks, was traditionally called "lunar caustic". It is used as a cauterizing agent, for example to remove granulation tissue around a stoma. Dentists sometimes use silver nitrate infused swabs to heal oral ulcers. Silver nitrate is also used by some podiatrists to kill cells located in the nail bed.

The Canadian physician C. A. Douglas Ringrose researched the use of silver nitrate for sterilization procedures on women. A specialist in obstetrics and gynaecology, Ringrose believed that the corrosive properties of silver nitrate could be used to block and corrode the fallopian tubes, in a process that he called "office tubal sterilization".[8] The technique was ineffective; in fact at least two women underwent abortions. Ringrose was sued for malpractice, although these suits were unsuccessful.[9]

Disinfection

Much research has been done in evaluating the ability of the silver ion at inactivating Escherichia coli, a microorganism commonly used as an indicator for fecal contamination and as a surrogate for pathogens in drinking water treatment. Concentrations of silver nitrate evaluated in inactivation experiments range from 10-200 micrograms per liter as Ag+. The antimicrobial properties of silver was first observed thousands of years ago when silver containers were used to store water for preservation. Its disinfection ability has been scientifically studied for over a century. [10]

Applications

The antimicrobial properties of silver have been put to a wide variety of uses, including:

  • Water disinfection in hotels and hospitals
  • Postharvest cleaning of oysters
  • Inhibition of bacterial growth on chicken farms
  • Water recycling aboard space shuttles
  • Home purification of water in Europe and North America
  • Point of use disinfectant for water and vegetables in Mexico
  • Alternative to antibiotics (not recommended by USFDA)
  • Alternative to laundry detergent
  • Application to eyes of newborn babies to prevent infection
  • Coating on catheters to prevent infection [11]

This property of silver was used for many purposes prior to the discovery of pharmaceutical antibiotics when it fell into near disuse. Its association with argyria made consumers wary and led them to turn away from it when given an alternative. Since that time, as antibiotic-resistant microorganisms have emerged, interest in using the silver ion for anti-microbial purposes has resumed. [12]

Kinetics

Before a disinfectant can be effectively used as a water disinfectant, its inactivation kinetics must be established. Kinetics generally depend on both the dosage of disinfectant and the time of application. It is important to understand the kinetics so that the minimum dosage of disinfectant can be applied for the minimum amount of time while still effectively inactivating any pathogens in the water. Because there are many microorganisms present in water, the inactivation kinetics of each one cannot be studied extensively. Therefore, indicator organisms generally more resistant to inactivation than others are used to estimate the kinetics of microorganisms as a whole. Escherichia coli, also referred to as E. coli, is a commonly used indicator organism.

It is well-documented that the silver ion is effective in the inactivation of E. coli. [13], [14], [15], [16], [17], [18], [19], [20], [21], [22], [23], [24]. However, there are many inconsistencies in the literature regarding the kinetics of the inactivation of E. coli by the silver ion. With inconsistent data, it is impossible to tell what the true inactivation kinetics are, and therefore impossible to implement any sort of large-scale water treatment.

The inconsistencies may be due to several factors. First, the kinetics may depend on the source of the silver ion being used. In recent years, research has focused largely on electrolytically generated silver ions or colloidal silver. Most studies in which the inactivation kinetics of E. coli by silver nitrate were explored extensively date back several decades. Even within this smaller group of studies, vast inconsistencies exist, likely due to inaccurate analytical methods for measuring the concentration of silver in solution. [25] Monitoring the decay of the silver ion in solution is imperative as silver tends to both adsorb readily to organic matter in the water and to be light reactive. [26] Furthermore, silver tends to adsorb to glassware, which can lead not only to a decrease in the silver concentration within a given experiment but also to a release of the silver in subsequent experiments unless measures further than general glassware washing are taken for the removal of silver from the glassware surface. [23] Therefore studies must both minimize the external factors effecting the concentration and to measure the changes in concentration that take place throughout the experiment.

Effects of various parameters

Despite the inconsistencies in the literature regarding the kinetics of the inactivation of E. coli by silver nitrate, important information can still be taken from the work. A study by Wuhrmann and Zobrist investigated the effect of various parameters upon the kinetics. First, they studied the effect of several ions in the water, including calcium, phosphates and chloride, all of which were found to decrease the bactericidal effect of silver.[22] These effects are important to consider when designing an experiment. Because of the effect of phosphates, it is undesirable to use phosphate buffer to run experiments, as this creates a phosphate concentration much higher than that found in natural waters and will falsely slow the inactivation kinetics. Furthermore, it is important to avoid touching any glassware with bare hands, as chloride from sweat may contaminate the glassware, again slowing inactivation. Chambers, Proctor and Kabler established the importance of using an effective neutralizer solution made of a combination of sodium thioglycolate and sodium thiosulfate, rather than sodium thiosulfate alone, which though it is effective in neutralizing other disinfectants does not sufficiently stop the bactericidal action of silver nitrate.[23] Both tested the effect of pH on the kinetics, finding that a higher pH increased the bactericidal action.[23], [26] Wuhrmann and Zobrist further established that at a higher temperature, inactivation occurs faster.[22]

Kinetic models

A further complication of the inactivation kinetics by silver is the question of which model to use. With most disinfectants, the inactivation is effectively modeled using a first-order Chick-Watson model, which states that a certain level of disinfection will occur at a certain CT, or concentration *time value.[27] According to this model, the same amount of inactivation should take place when a concentration of 0.2 mg/L is applied for 10 minutes as when 0.02 mg/L is applied for 100 minutes. Wuhrmann and Zobrist found rate kinetics that followed this model for all conditions, which agrees fairly well with a study by Chambers and Proctor, while another study by Renn and Chesney found curves that did not follow this law.[25] It is therefore unclear whether this law sufficiently models inactivation by the silver ion.

Most recent papers regarding the disinfection of E. coli by silver nitrate have simply plotted the level of disinfection against time. [13], [16], [18], [20], [21] While this method of data analysis does not risk making false assumptions about first-order kinetics, it does nothing to account for the applied concentration, which is essential to any kinetics. Therefore, different curves need to be generated for each concentration that might be applied. Furthermore, it does not account for changes in concentration that might take place during the experiment, and which may vary based on many factors.

A third model which has been suggested for the inactivation kinetics by silver nitrate is that of Cs*T, or chemisorbed silver onto the cell body times time. This model suggests that the rate of inactivation depends not on the concentration in the water at a given time, but rather on the silver that has been chemisorbed by the bacteria. It is assumed, according to this model that C0 = C1 + C2 + C3, where C0 is the initial concentration, C1 is the silver still in solution, C2 is the silver lost to adsorption to glassware or other factors in the solution, and C3 is the silver chemisorbed to the bacteria. C0 is measured at the beginning of the experiment, C1 is measured throughout the experiment, and C2 is determine in a control experiment without bacteria. C3, or the Cs value, is then determined to be C0-C1-C2. [14], [28] According to Hwang, et al., this model was successful in estimating inactivation of E. coli by silver nitrate. [14] Although it is possible that this model does not sufficiently account for all of the possible fates of the initial silver nitrate added to the solution, it is certainly a compelling method of data analysis. Because it is a new model, it has not been extensively studied by various researchers.

Safety

Template:Rewrite-section

Hand stained by silver nitrate

As with all silver salts, silver nitrate is toxic and corrosive.[29] Brief exposure to the chemical will not produce immediate or even any side effects other than the purple skin stains, but with more exposure, side effects will become more noticeable. It is also very poisonous and can cause burns. Long-term exposure may cause eye damage. Short contact can lead to deposition of black silver stains on the skin. Besides being very destructive of mucous membranes, it is a skin and eye irritant.

File:Argyria.jpg
A man with argyria

Although silver nitrate is currently not regulated in water sources by the Environmental Protection Agency, when between 1-5 g of silver have accumulated in the body, a condition called argyria can develop. Argyria is a permanent cosmetic condition in which the skin and internal organs turn a blue-gray color. The United States Environmental Protection Agency had a maximum contaminant limit for silver in water until 1990, but upon determination that argyria did not impact the function of organs affected, removed the regulation. [26] Argyria is more often associated with the consumption of colloidal silver solutions than with silver nitrate, especially at the extremely low concentrations present for the disinfection of water. However, it is still important to consider before ingesting any sort of silver-ion solution.

References

  1. ^ "Definition of Lunar Caustic".
  2. ^ P. Meyer, A. Rimsky et R. Chevalier (1978). "Structure du nitrate d'argent à pression et température ordinaires. Example de cristal parfait". Acta Crystallographica Section B. 34: 1457–1462. doi:10.1107/S0567740878005907.
  3. ^ Campaigne, E.; LeSuer, W. M. (1963). "3-Thiophenecarboxylic (Thenoic) Acid". Organic Syntheses{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 4, p. 919. (preparation of Ag2O, used in oxidation of an aldehyde)
  4. ^ Cope, A. C.; Bach, R. D. (1973). "trans-Cyclooctene". Organic Syntheses{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 5, p. 315.
  5. ^ Peter.H (2000). "Dr Carl Credé (1819-1892) and the prevention of ophthalmia neonatorum". Arch Dis Child Fetal Neonatal. 83: F158–F159. doi:10.1136/fn.83.2.F158. PMID 10952715.
  6. ^ Credé C. S. E. (1881). "Die Verhürtung der Augenentzündung der Neugeborenen". Archiv für Gynaekologie. 17: 50–53. doi:10.1007/BF01977793.
  7. ^ Bulletin of the WHO: Credé's method still valid?
  8. ^ Ringrose CA. (1973). "Office tubal sterilization". Obstetrics and Gynecology. 42 (1): 151–5. PMID 4720201.
  9. ^ Cryderman v. Ringrose (1978), 89 D.L.R. (3d) 32 (Alta S.C.) and Zimmer et. al v. Ringrose (1981) 4 W.W.R. 75 (Alta C.A.).
  10. ^ Cite error: The named reference Just was invoked but never defined (see the help page).
  11. ^ Gupta, Amit; Silver, Simon (1998). "Silver As a Biocide: Will Resistance Become a Problem?". Nature Biotechnology. 16: 888. doi:10.1038/nbt1098-888.{{cite journal}}: CS1 maint: date and year (link)
  12. ^ "A Brief History of the Health Support Uses of Silver". Silver Colloids.
  13. ^ a b Potapchenko, N. G., L. V. Grigor'eva, O. S. Savluk, and L. A. Kul'skii. "Dosage-Time Dependency of Effect of Silver in Water on Pathogenic Escherichia." Soviet Journal of Water Chemistry and Technology 10 (1988): 101-104.
  14. ^ a b c Hwang, Myoung Goo, Hiroyuki Katayama, and Shinichiro Ohgaki. "Inactivation of Legionella penumophilia and Pseudomonas aeruginosa: Evaluation of the bactericidal ability of silver cations." Water Research 41 (2007): 4097-4104.
  15. ^ Jung, Woo Kyung, Hye Cheong Koo, Ki Woo Kim, Sook Shin, So Hyun Kim, and Yong Ho Park. "Antibacterial Activity and Mechanism of Action of the Silver Ion in Staphylococcus aureus and Escherichia coli." Applied and Environmental Microbiology 74:7 (2008): 2171-2178.
  16. ^ a b Kim, Jee Yeon, Changha Lee, Min Cho, and Jeyong Yoon. "Enhanced inactivation of E. coli and MS-2 phage by silver ions combined with UV-A and visible light irradiation." Water Research 42 (2008) 356-362.
  17. ^ Yamanaka, Mikihiro, Keita Hara, and Jun Kudo. "Bactericidal Actions of a Silver Ion Solution on Escherichia coli, Studied by Energy-Filtering Transmission Electron Microscophy and Proteomic Analysis." Applied and Environmental Microbiology 71:11 (2005) 7589-7593.
  18. ^ a b Matsumura, Yoshinobu, Kuniaki Yoshikata, Shin-ichi Kunisaki, and Tetsuaki Tsuchido. "Mode of Bactericidal Action of Silver Zeolite and Its Comparison with That of Silver Nitrate." Applied and Environmental Microbiology 69.7 (2003): 4278-4281.
  19. ^ Khaydarov, R. A., R. R. Khaydarov, R. L. Olsen, and S. E. Rogers. "Water Disinfection using electrolytically generated silver, copper and gold ions." Journal of Water Supply: Research and Technology—AQUA 53.8 (2004) 567-572.
  20. ^ a b Zhao, Guojing and S. Edward Stevens, Jr. "Multiple parameters for the comprehensive evaluation of the susceptibility of Escherichia coli to the silver ion." BioMetals 11 (1998) 27-32.
  21. ^ a b Pedahzur, R., H. I. Shuval, and S. Ulitzur. "Silver and Hydrogen Peroxide as Potential Drinking Water Disinfectants: Their Bactericidal Effects and Possible Modes of Action." Water Science and Technology 35 (1997) 87-93.
  22. ^ a b c Wuhrmann, Von K. and F. Zobrist. "Untersuchengen uber die bakterizide Wirkung von Silvber in Wasser." Schweizerische Zeitschrift fur Hydrologie 20 (1958) 218-255.
  23. ^ a b c d Chambers, Cecil W., Charles M. Proctor, and Paul W. Kabler. "Bactericidal Effect of Low Concentrations of Silver." Journal of the American Water Works Association 54 (1962) 208-216.
  24. ^ Pedahzur, Rami, Ovadia Lev, Badri Fattal and Hillel I. Shuval. The Interaction of Silver Ions and Hydrogen Peroxide in the Inactivation of E. coli: A Preliminary Evaluation of a New Long Acting Residual Drinking Water Disinfectant." Water Science and Technology 31 (1995) 123-129.
  25. ^ a b Woodward, Richard L. "Review of the Bactericidal Effectiveness of Silver." Journal of the American Water Works Association. 55.7 (1963) 881-886.
  26. ^ a b c "Silver Compounds." Encyclopedia of Chemical Technology. Vol. 22. Fourth Ed. Excec. Ed. Jaqueline I. Kroschwitz. New York: John Wiley and Sons, 1997.
  27. ^ Masters, Gilbert M. and Wendell P. Ela. "Introduction to Environmental Engineering and Science." Fifth Edition. Upper Saddle River: Prentice Hall, 2006.
  28. ^ Hwang, M. G., H. Katayama, and S. Ohgaki. "Accumulation of copper and silver onto cell body and its effect on the inactivation of Pseudomonas aeruginosa." Water Science and Technology 54.3 (2006) 29-34.
  29. ^ "Safety data for silver nitrate (MSDS)". Oxford University Chemistry department.

Can also be used to remove warts and verucas.

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Silver_nitrate&oldid=255994925"