Jump to content

CDMA subscriber identity module: Difference between revisions

Add links
From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
m moved CDMA Subscriber Identify Module to CDMA Subscriber Identity Module: The title was incorrect. The third word is "IdentiTy", not "IdentiFy"
→CSIM Application File System: Add more cross-references, make formatting more consistent.
Line 6: Line 6:
The CSIM application contains a file system with a number of parameters needed to operate on [[cdmaOne]]/[[CDMA2000]] ("CDMA") networks. Each parameter, or a group of related parameters, is specified with a unique identifier with an implicit or explicit length, and is considered a separate Elementary File (EF). The following examples are taken from the 3GPP2 specification.<ref name="C.S0065"> cdma2000 Application on UICC for Spread Spectrum Systems </ref>
The CSIM application contains a file system with a number of parameters needed to operate on [[cdmaOne]]/[[CDMA2000]] ("CDMA") networks. Each parameter, or a group of related parameters, is specified with a unique identifier with an implicit or explicit length, and is considered a separate Elementary File (EF). The following examples are taken from the 3GPP2 specification.<ref name="C.S0065"> cdma2000 Application on UICC for Spread Spectrum Systems </ref>


* Encryption keys, provisioned by the operator
* Encryption keys, provisioned by the operator.
* Phone Number
* Phone Number.
* Call Counts
* Call Counts.
* Short Message Service Parameters
* Short Message Service Parameters.
* Received Short Messages (255 bytes maximum per message)
* Received Short Messages (255 bytes maximum per message).
* IMSI (international mobile subscriber identifier)
* [[IMSI]] (international mobile subscriber identifier).
* TMSI (temporary mobile surbscriber identifier, for position security)
* [[TMSI]] (temporary mobile surbscriber identifier, for position security).
* UIM_ID (hardware identifier). Will be a pseudo (hashed) value if [[EUIMID]] is in use.
* [[UIMID]] (hardware identifier). Will be a pseudo (hashed) value if [[EUIMID]] is in use.
* [[EUIMID]]. Either short form (based on [[MEID]]) or long form (based on [[ICCID]]).
* [[EUIMID]]. Either short form (based on [[MEID]]) or long form (based on [[ICCID]]).
* [[ICCID]]. Present even if it is not used as [[EUIMID]].
* [[ICCID]]. Present even if it is not used as [[EUIMID]].
* MEID (hardware identifier)
* [[MEID]] (hardware identifier).
* Analog (AMPS) operational parameters
* Analog ([[Advanced_Mobile_Phone_System|AMPS]]) operational parameters.
* CDMA home identifiers, such as SID and NID
* [[CDMA2000]] home identifiers, such as [[System_Identification_Number|SID]] and NID.
* CDMA zone-based registration parameters, telling the handset to register when it changes to a new operator-defined zone (SID/NID)
* [[CDMA2000]] zone-based registration parameters, telling the handset to register when it changes to a new operator-defined zone ([[System_Identification_Number|SID]]/NID).
* CDMA distance-based registration parameters, telling the handset to register when it travels a certain distance (each CDMA transmitter emits its GPS location)
* [[CDMA2000]] distance-based registration parameters, telling the handset to register when it travels a certain distance (each [[CDMA2000]] transmitter emits its GPS location).
* Random parameters (slot cycle index) to use during CSMA access probes
* Random parameters (slot cycle index) to use during CSMA access probes.
* List of services available. If a service is not indicated as available in the CSIM, the mobile equipment shall not select this service. Examples include "Call Control", "SMS", "BCMCS Broadcast", "IP Location", etc. If a service is not in this table, the handset will not provide the service.
* List of services available. If a service is not indicated as available in the CSIM, the mobile equipment shall not select this service. Examples include "Call Control", "SMS", "BCMCS Broadcast", "IP Location", etc. If a service is not in this table, the handset will not provide the service.
* Multimode System Selection (MMSS) parameters
* Multimode System Selection (MMSS) parameters.


==References==
==References==

Revision as of 15:00, 11 October 2011

"CSIM" redirects here. For client-side image maps, see Image map.

A CDMA Subscriber Identity Module (CSIM) is an application that runs on a removable smart card. Originally, a subset of the CSIM application ran on an R-UIM card. The application has been ported to the UICC (Universal Integrated Circuit Card), so that a card with CSIM, SIM, and USIM can operate with all major cellular technologies worldwide. The CSIM application allows users to change phones by simply removing the smart card from one mobile phone and inserting it into another mobile phone or broadband telephony device supporting this interface.[1]

CSIM Application File System

The CSIM application contains a file system with a number of parameters needed to operate on cdmaOne/CDMA2000 ("CDMA") networks. Each parameter, or a group of related parameters, is specified with a unique identifier with an implicit or explicit length, and is considered a separate Elementary File (EF). The following examples are taken from the 3GPP2 specification.[1]

  • Encryption keys, provisioned by the operator.
  • Phone Number.
  • Call Counts.
  • Short Message Service Parameters.
  • Received Short Messages (255 bytes maximum per message).
  • IMSI (international mobile subscriber identifier).
  • TMSI (temporary mobile surbscriber identifier, for position security).
  • UIMID (hardware identifier). Will be a pseudo (hashed) value if EUIMID is in use.
  • EUIMID. Either short form (based on MEID) or long form (based on ICCID).
  • ICCID. Present even if it is not used as EUIMID.
  • MEID (hardware identifier).
  • Analog (AMPS) operational parameters.
  • CDMA2000 home identifiers, such as SID and NID.
  • CDMA2000 zone-based registration parameters, telling the handset to register when it changes to a new operator-defined zone (SID/NID).
  • CDMA2000 distance-based registration parameters, telling the handset to register when it travels a certain distance (each CDMA2000 transmitter emits its GPS location).
  • Random parameters (slot cycle index) to use during CSMA access probes.
  • List of services available. If a service is not indicated as available in the CSIM, the mobile equipment shall not select this service. Examples include "Call Control", "SMS", "BCMCS Broadcast", "IP Location", etc. If a service is not in this table, the handset will not provide the service.
  • Multimode System Selection (MMSS) parameters.

References

  1. ^ a b C.S0065-B v2.0. cdma2000 Application on UICC for Spread Spectrum Systems. 3GPP2. 2011. http://www.3gpp2.org/Public_html/specs/C.S0065-B_v2.0_CSIM.pdf Cite error: The named reference "C.S0065" was defined multiple times with different content (see the help page).
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=CDMA_subscriber_identity_module&oldid=455048040"