Jump to content

JNR Class EF63: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Bclough (talk | contribs)
No edit summary
Reverted good faith edits by Bclough (talk): No problem with original wording (and "pushers" is actually misleading, since they did not always push). (TW)
Line 30: Line 30:


==History==
==History==
A total of 25 Class EF63 locomotives were built between 1962 and 1976 exclusively for use as pushers on the steeply-graded [[Usui Pass]] section of the [[Shinetsu Main Line]] between [[Yokokawa Station|Yokokawa]] and [[Karuizawa Station|Karuizawa]]. They replaced the Class ED42 electric locomotives previously used on the rack-and-pinion line between these two stations.
A total of 25 Class EF63 locomotives were built between 1962 and 1976 exclusively for use as bankers on the steeply-graded [[Usui Pass]] section of the [[Shinetsu Main Line]] between [[Yokokawa Station|Yokokawa]] and [[Karuizawa Station|Karuizawa]]. They replaced the Class ED42 electric locomotives previously used on the rack-and-pinion line between these two stations.


The prototype, EF63 1, was produced in 1962 by Toshiba for testing before full production of the class started in 1963 spread between manufacturers Kawasaki, Mitsubishi and Toshiba. The class was equipped with a number of special safety features to cope with the unique conditions of operating on the 66.7[[Per mil|‰]] gradient of the Usui Pass.<ref>{{Cite web |url= http://d-arch.ide.go.jp/je_archive/society/wp_je_unu36.html|title= Technological independence and progress of standardization in the Japanese railways|accessdate=2 January 2009 |last= Harada|first= Katsumasa|year= 1981|work= |publisher= [[JETRO]]|location= |pages= |quote=it was eventually decided to build the track at a steep grade of 66.7/1,000 }}</ref> These included independent dynamic brakes on all six axles (hence the large louvres along the bodysides for heat dissipation), magnetic adhesion brakes operating directly on the rails, and mechanical locking brakes. Small wheels attached to the centre bogie were used to measure the train speed and apply the brakes in the case of run-away. The class used the same 425&nbsp;kW MT52 traction motors used on the [[JNR Class EF62|EF62s]] and also the [[JNR Class EF70|EF70s]].
The prototype, EF63 1, was produced in 1962 by Toshiba for testing before full production of the class started in 1963 spread between manufacturers Kawasaki, Mitsubishi and Toshiba. The class was equipped with a number of special safety features to cope with the unique conditions of operating on the 66.7[[Per mil|‰]] gradient of the Usui Pass.<ref>{{Cite web |url= http://d-arch.ide.go.jp/je_archive/society/wp_je_unu36.html|title= Technological independence and progress of standardization in the Japanese railways|accessdate=2 January 2009 |last= Harada|first= Katsumasa|year= 1981|work= |publisher= [[JETRO]]|location= |pages= |quote=it was eventually decided to build the track at a steep grade of 66.7/1,000 }}</ref> These included independent dynamic brakes on all six axles (hence the large louvres along the bodysides for heat dissipation), magnetic adhesion brakes operating directly on the rails, and mechanical locking brakes. Small wheels attached to the centre bogie were used to measure the train speed and apply the brakes in the case of run-away. The class used the same 425&nbsp;kW MT52 traction motors used on the [[JNR Class EF62|EF62s]] and also the [[JNR Class EF70|EF70s]].

Revision as of 02:15, 11 June 2014

EF63
A pair of EF63s leading a 489 series EMU on a Hakusan service in June 1997
Type and origin
Power typeElectric
BuilderKawasaki, Mitsubishi and Tōshiba
Build date1962–1976
Specifications
Configuration:
 • UICBo-Bo-Bo
Gauge1,067 mm (3 ft 6 in)
Wheel diameter1,120 mm (3 ft 8 in)
Length18,050 mm (59 ft 3 in)
Width2,800 mm (9 ft 2 in)
Height4,060 mm (13 ft 4 in)
Loco weight108 t
Electric system/s1,500 V DC
Traction motorsDC
Performance figures
Power output2.55 MW (3,420 hp)
Tractive effort23,400 kgf (229,476 N; 51,588 lbf)
Career
Number in class25
DispositionAll withdrawn

The JNR Class EF63 is a class of 1,500 V DC electric locomotives formerly operating in Japan.

History

A total of 25 Class EF63 locomotives were built between 1962 and 1976 exclusively for use as bankers on the steeply-graded Usui Pass section of the Shinetsu Main Line between Yokokawa and Karuizawa. They replaced the Class ED42 electric locomotives previously used on the rack-and-pinion line between these two stations.

The prototype, EF63 1, was produced in 1962 by Toshiba for testing before full production of the class started in 1963 spread between manufacturers Kawasaki, Mitsubishi and Toshiba. The class was equipped with a number of special safety features to cope with the unique conditions of operating on the 66.7 gradient of the Usui Pass.[1] These included independent dynamic brakes on all six axles (hence the large louvres along the bodysides for heat dissipation), magnetic adhesion brakes operating directly on the rails, and mechanical locking brakes. Small wheels attached to the centre bogie were used to measure the train speed and apply the brakes in the case of run-away. The class used the same 425 kW MT52 traction motors used on the EF62s and also the EF70s. The entire class was based at Yokokawa depot, and they were always used in pairs at the Yokokawa end of trains travelling in both directions, and were capable of operating in multiple with Class EF62 locomotives and a wide range of EMU types (including 115, 185, 189, 489 series) – hence the impressive array of jumper cables and connectors on the Karuizawa ends of the locos. Trains ascending the incline from Yokokawa were driven by the driver in the rearmost cab of the EF63 pair at the rear of the train, with the driver in the front cab of the train acting only as signal look-out.

Locos EF63 5 and EF63 9 were written off after a runaway derailment also involving two EF62s in 1975, and EF63 24 and EF63 25 were additionally built in 1976 to replace these two.

In 1978, EF63 11 and 13 were specially turned out to work an imperial train over the Usui Pass.

Following privatization of JNR, the entire fleet was transferred to JR East operation with the exception of EF63 1 and 14 operated by JR Freight.

The closure of the Yokokawa to Karuizawa section of the Shinetsu Main Line in September 1997 coinciding with the opening of the new Nagano Shinkansen marked the end of the careers of the EF63 locomotives. Before their final withdrawal, however, a number of locos (EF63 18, 19, 24, and 25) were repainted into original brown livery following their last overhauls in 1997. Incidentally, these locomotives were delivered in standard blue livery from new.

Locomotive histories

No. Built Builder Withdrawn
EF63 1 1962 Toshiba 1984
EF63 2 1963 Toshiba 1998
EF63 3 1963 Toshiba 1998
EF63 4 1963 Toshiba 1998
EF63 5 1963 Toshiba 1975
EF63 6 1963 Toshiba 1998
EF63 7 1963 Mitsubishi 1998
EF63 8 1963 Mitsubishi 1998
EF63 9 1963 Mitsubishi 1975
EF63 10 1963 Mitsubishi 1998
EF63 11 1963 Mitsubishi 1998
EF63 12 1963 Mitsubishi 1998
EF63 13 1963 Mitsubishi 1998
EF63 14 1966 Toshiba 1984
EF63 15 1966 Toshiba 1998
EF63 16 1966 Toshiba 1998
EF63 17 1966 Toshiba 1998
EF63 18 1967 Kawasaki 1998
EF63 19 1967 Mitsubishi 1998
EF63 20 1969 Kawasaki 1998
EF63 21 1969 Kawasaki 1998
EF63 22 1974 Kawasaki 1998
EF63 23 1974 Kawasaki 1998
EF63 24 1976 Kawasaki 1998
EF63 25 1976 Kawasaki 1998

Source:

  • Tezuka, Kazuyuki (December 1996), "EF63と強調運転 (EF63 and cooperative operation)", Japan Railfan Magazine (in Japanese), 36 (428): 18 et seq.

Batch differences

Batch 1: EF63 2 – EF63 13 Icicle cutters added above cab windscreens, rectangular front skirts
Batch 2: EF63 14 – EF63 21 Recessed tail lights, lightning protector moved to centre of cab roof
Batch 3: EF63 22 – EF63 25 Loco numbers affixed in number plate form

Preserved examples

EF63 1 preserved at Usui Pass Railway Heritage Park in brown livery
  • EF63 1 Usui Pass Railway Heritage Park, Gunma (brown livery)
  • EF63 2 Karuizawa Station
  • EF63 10 Usui Pass Railway Heritage Park, Gunma
  • EF63 11 Usui Pass Railway Heritage Park, Gunma (operational)
  • EF63 12 Usui Pass Railway Heritage Park, Gunma (operational)
  • EF63 13 Cab section only at Omiya Works
  • EF63 15 Nagano depot
  • EF63 18 Usui Pass Railway Heritage Park, Gunma (brown livery)
  • EF63 19 Nagano depot (brown livery)
  • EF63 22 Privately preserved
  • EF63 24 Usui Pass Railway Heritage Park, Gunma (operational)
  • EF63 25 Usui Pass Railway Heritage Park, Gunma (operational)

EF63 24 and 25 are currently used to provide driver training sessions to members of the public at the Usui Pass Railway Heritage Park on a short stretch of track electrified at 750 V DC (rather than the normal 1,500 V). EF63 11 and 12 are kept as operational spares. All other preserved examples are kept as static exhibits.

See also

References

  1. ^ Harada, Katsumasa (1981). "Technological independence and progress of standardization in the Japanese railways". JETRO. Retrieved 2 January 2009. it was eventually decided to build the track at a steep grade of 66.7/1,000