Jump to content

Isopentane: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
top: +viscosity (per pubchem)
Line 49: Line 49:
| LambdaMax = 192 nm
| LambdaMax = 192 nm
| RefractIndex = 1.354
| RefractIndex = 1.354
| Viscosity = 0.214 cP (at 20 °C)
}}
}}
|Section4={{Chembox Thermochemistry
|Section4={{Chembox Thermochemistry

Revision as of 03:51, 31 January 2016

Isopentane
Skeletal formula of isopentane
Skeletal formula of isopentane with all implicit carbons shown, and all explicit hydrogens added
Ball and stick model of isopentane
Names
IUPAC name
2-Methylbutane[1]
Identifiers
3D model (JSmol)
1730723
ChEBI
ChemSpider
ECHA InfoCard 100.001.039 Edit this at Wikidata
EC Number
  • 201-142-8
49318
MeSH isopentane
RTECS number
  • EK4430000
UNII
UN number 1265
  • InChI=1S/C5H12/c1-4-5(2)3/h5H,4H2,1-3H3 checkY
    Key: QWTDNUCVQCZILF-UHFFFAOYSA-N checkY
  • CCC(C)C
Properties
C5H12
Molar mass 72.151 g·mol−1
Appearance Colorless liquid
Odor Odorless
Density 616 mg mL−1[2]
Melting point −161 to −159 °C; −258 to −254 °F; 112 to 114 K
Boiling point 27.8 to 28.2 °C; 81.9 to 82.7 °F; 300.9 to 301.3 K
Vapor pressure 76.992 kPa (at 20 °C)
7.2 nmol Pa−1 kg−1
UV-vismax) 192 nm
1.354
Viscosity 0.214 cP (at 20 °C)
Thermochemistry
164.85 J K−1 mol−1
260.41 J K−1 mol−1
−179.1–−177.3 kJ mol−1
−3.5052–−3.5036 MJ mol−1
Hazards
GHS labelling:
GHS02: Flammable GHS07: Exclamation mark GHS08: Health hazard GHS09: Environmental hazard
Danger
H224, H304, H336, H411
P210, P261, P273, P301+P310, P331
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
4
0
Flash point −51 °C (−60 °F; 222 K)
420 °C (788 °F; 693 K)
Explosive limits 1.4–8.3%
Related compounds
Related alkanes
Related compounds
2-Ethyl-1-butanol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Isopentane, C5H12, also called methylbutane or 2-methylbutane, is a branched-chain alkane with five carbon atoms . Isopentane is an extremely volatile and extremely flammable liquid at room temperature and pressure. The normal boiling point is just a few degrees above room temperature and isopentane will readily boil and evaporate away on a warm day. Isopentane is commonly used in conjunction with liquid nitrogen to achieve a liquid bath temperature of −160 °C. It is 1% or less of natural gas.[3]

Nomenclature

2-methylbutane is the name recommended by the International Union of Pure and Applied Chemistry (IUPAC).[4] An isopentyl group is a subset of the generic pentyl group. It has the chemical structure -CH2CH2CH(CH3)2.

Isomers

Isopentane is one of three structural isomers with the molecular formula C5H12, the others being pentane (n-pentane) and neopentane (dimethyl propane).

Uses

Isopentane is used in a closed loop in geothermal power production to drive turbines.[5]

Isopentane is used, in conjunction with dry ice or liquid nitrogen, to freeze tissues for cryosectioning in histology. [6]

References

  1. ^ "isopentane - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 16 September 2004. Identification and Related Records. Retrieved 5 March 2012.
  2. ^ James Wei (1999), Molecular Symmetry, Rotational Entropy, and Elevated Melting Points. Ind. Eng. Chem. Res., volume 38 issue 12, pp. 5019–5027 doi:10.1021/ie990588m
  3. ^ Georg Hammer, Torsten Lübcke, Roland Kettner, Mark R. Pillarella, Herta Recknagel, Axel Commichau, Hans-Joachim Neumann and Barbara Paczynska-Lahme "Natural Gas" in Ullmann's Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a17_073.pub2
  4. ^ Panico, R.; & Powell, W. H. (Eds.) (1994). A Guide to IUPAC Nomenclature of Organic Compounds 1993. Oxford: Blackwell Science. ISBN 0-632-03488-2.{{cite book}}: CS1 maint: multiple names: authors list (link)
  5. ^ Byproduct Isopentane also used in some of the LPG plant to run the boiler and generate the power. HS Orka HF Energy Plant IV
  6. ^ http://www.uab.edu/research/administration/offices/ARP/ComparativePathology/Pathology/Histopathology/TissueSubmission/Pages/Freezing-Tissues-for-Cryosectioning.aspx