Jump to content

1929 Murchison earthquake: Difference between revisions

Coordinates: 41°33′S 172°15′E / 41.55°S 172.25°E / -41.55; 172.25
From Wikipedia, the free encyclopedia
Content deleted Content added
update url and add alternative magnitude + citation
GreenC bot (talk | contribs)
Line 25: Line 25:
==Tectonic setting==
==Tectonic setting==
[[File:NZ faults.png|thumb|250px|Major [[active fault]] zones of New Zealand showing variation in displacement vector of [[Pacific Plate]] relative to [[Indo-Australian Plate|Australian Plate]] along the boundary]]
[[File:NZ faults.png|thumb|250px|Major [[active fault]] zones of New Zealand showing variation in displacement vector of [[Pacific Plate]] relative to [[Indo-Australian Plate|Australian Plate]] along the boundary]]
New Zealand sits astride the boundary between the [[Indo-Australian Plate]] and the [[Pacific Plate]]. In the South Island most of the displacement is taken up on the [[Alpine Fault]] passing to the north onto a set of [[Fault (geology)#Strike-slip faults|strike-slip faults]], the [[Marlborough Fault System]]. The sense of displacement across the plate boundary is oblique and most of the faults have a reverse component of slip. Some of the resulting deformation is accommodated within the plates themselves away from the boundary.<ref name="West Coast Regional Council">{{cite web|url=http://www.wcrc.govt.nz/Resources/Documents/NaturalHazardsResourceKit/4%20Earthquake%20Hazards.pdf|title=Earthquake Hazards|last=West Coast Regional Council|year=2002|accessdate=28 June 2010| archiveurl= http://web.archive.org/web/20100525035616/http://www.wcrc.govt.nz/Resources/Documents/NaturalHazardsResourceKit/4%20Earthquake%20Hazards.pdf| archivedate= 25 May 2010 <!--DASHBot-->| deadurl= no}}</ref> The 1929 Murchison earthquake occurred on the White Creek Fault, located in the [[Buller Gorge]].<ref name=GeoNet/>
New Zealand sits astride the boundary between the [[Indo-Australian Plate]] and the [[Pacific Plate]]. In the South Island most of the displacement is taken up on the [[Alpine Fault]] passing to the north onto a set of [[Fault (geology)#Strike-slip faults|strike-slip faults]], the [[Marlborough Fault System]]. The sense of displacement across the plate boundary is oblique and most of the faults have a reverse component of slip. Some of the resulting deformation is accommodated within the plates themselves away from the boundary.<ref name="West Coast Regional Council">{{cite web|url=http://www.wcrc.govt.nz/Resources/Documents/NaturalHazardsResourceKit/4%20Earthquake%20Hazards.pdf|title=Earthquake Hazards|last=West Coast Regional Council|year=2002|accessdate=28 June 2010| archiveurl= https://web.archive.org/web/20100525035616/http://www.wcrc.govt.nz/Resources/Documents/NaturalHazardsResourceKit/4%20Earthquake%20Hazards.pdf| archivedate= 25 May 2010 <!--DASHBot-->| deadurl= no}}</ref> The 1929 Murchison earthquake occurred on the White Creek Fault, located in the [[Buller Gorge]].<ref name=GeoNet/>


==Damage==
==Damage==

Revision as of 09:32, 13 September 2016

1929 Murchison earthquake
1929 Murchison earthquake is located in New Zealand
1929 Murchison earthquake
UTC time??
MagnitudeMs 7.8, Mw 7.3[1]
Depth12km
Epicenter41°33′S 172°15′E / 41.55°S 172.25°E / -41.55; 172.25[1]
Areas affectedSouth Island New Zealand
Casualties17

The 1929 Murchison earthquake occurred at 10:17 AM on 17 June. It struck the Murchison region of the South Island, with an estimated magnitude of 7.3, and was felt throughout New Zealand. There were 17 casualties, mostly as a result of landslides triggered by the earthquake. The rumbling sound of the earthquake was loud enough to be heard at New Plymouth, more than 250 km away.[2]

Tectonic setting

Major active fault zones of New Zealand showing variation in displacement vector of Pacific Plate relative to Australian Plate along the boundary

New Zealand sits astride the boundary between the Indo-Australian Plate and the Pacific Plate. In the South Island most of the displacement is taken up on the Alpine Fault passing to the north onto a set of strike-slip faults, the Marlborough Fault System. The sense of displacement across the plate boundary is oblique and most of the faults have a reverse component of slip. Some of the resulting deformation is accommodated within the plates themselves away from the boundary.[3] The 1929 Murchison earthquake occurred on the White Creek Fault, located in the Buller Gorge.[1]

Damage

Although the epicentre was in a sparsely populated area about 65 km north of Murchison, the shaking in the surrounding region was sufficiently intense to cause damage over a wide area. The towns of Nelson, Greymouth and Westport were all affected and roads, buildings and bridges were severely damaged throughout an area estimated at 26,000 km2.[1] The worst damage was caused by landslides triggered by the shaking, which destroyed several homes and resulting in 14 out of the 17 deaths caused by the earthquake. Most of the buildings in the Murchison area were built of wood and were warped and moved from their piles, but many brick buildings and chimneys were damaged in Nelson, Greymouth and Westport.[2]

Characteristics

The earthquake was preceded by several foreshocks before the mainshock, accompanied by booming sounds in the mountains around Murchison.[2] There was a large surface fault rupture visible in the Buller River, indicating about 4.5 m of vertical movement and 2.5 m of lateral movement. The earthquake triggered many landslides and these created 38 new lakes, of which 21 still exist, including Lake Stanley, on Stanley River.[1] The earthquake was accompanied by unusually loud rumbling noises that were heard as far away as New Plymouth. A maximum intensity of X (Extreme) on the Mercalli intensity scale has been estimated for Murchison. Most of the northern part of South Island suffered an intensity of VII (Very strong) or greater.[2]

Aftermath

The landslides blocked many roads causing food supplies to run out in some areas near the epicenter. This and the risk from aftershocks and flooding from the landslides blocking rivers caused many residents to evacuate the area, mostly on foot. Karamea was completely cut off and received no outside help for two weeks, until a de Havilland Tiger Moth plane landed on the beach. Some of the blocked roads took months to clear.[2]

See also

References

  1. ^ a b c d e GeoNet (17 June 1929). "M 7.8, Buller (Murchison),". Archived from the original on 4 June 2010. Retrieved 28 June 2010. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  2. ^ a b c d e McSaveney, E. (2 March 2009). "The 1929 Arthur's Pass and Murchison earthquakes". Te Ara - the Encyclopedia of New Zealand. Retrieved 28 June 2010.
  3. ^ West Coast Regional Council (2002). "Earthquake Hazards" (PDF). Archived from the original (PDF) on 25 May 2010. Retrieved 28 June 2010. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)