Hunter's bend: Difference between revisions
m Task 18 (cosmetic): eval 4 templates: del empty params (7×); hyphenate params (3×); |
Stray cap Tags: Mobile edit Mobile web edit |
||
| Line 15: | Line 15: | ||
'''Hunter's bend''' (or '''rigger's bend''') is a [[knot]] used to join two lines. It consists of interlocking [[overhand knot]]s, and can [[List of knot terminology#Jamming|jam]] under moderate strain. It is topologically similar to the [[Zeppelin bend]]. |
'''Hunter's bend''' (or '''rigger's bend''') is a [[knot]] used to join two lines. It consists of interlocking [[overhand knot]]s, and can [[List of knot terminology#Jamming|jam]] under moderate strain. It is topologically similar to the [[Zeppelin bend]]. |
||
When assessed against other bends |
When assessed against other bends in stress tests using [[Parachute cord|paracord]], it was found to be "not as strong as the [[blood knot]], similar to the [[Flemish bend|reverse figure of eight]] and stronger than the [[Fisherman's knot|fisherman's bend]], [[sheet bend]] or [[reef knot]]". <ref name="ashleyIGKT">{{citation|last=Ashley|first=Clifford W.|title=The Ashley Book of Knots|pages=260–261|year=1993|orig-year=1944|location=New York|publisher=Doubleday|isbn=0-385-04025-3}}</ref> |
||
==History== |
==History== |
||
Revision as of 14:41, 24 January 2021
| Hunter's bend | |
|---|---|
 | |
| Names | Hunter's bend, Rigger's bend |
| Category | Bend |
| Related | Alpine butterfly bend, Zeppelin bend, Zeppelin loop, Ashley's bend |
| Typical use | easily-untied bend for rigging and mooring |
| ABoK | #1425A |
Hunter's bend (or rigger's bend) is a knot used to join two lines. It consists of interlocking overhand knots, and can jam under moderate strain. It is topologically similar to the Zeppelin bend.
When assessed against other bends in stress tests using paracord, it was found to be "not as strong as the blood knot, similar to the reverse figure of eight and stronger than the fisherman's bend, sheet bend or reef knot". [1]
History
In October 1978, an article in The Times presented it as a newly invented knot credited to Dr. Edward Hunter.[2] He had used it for years to tie broken shoelaces before discovering its originality through a friend in the 1970s. When it appeared on the front page, it led to much publicity for the knot and also to the formation of the International Guild of Knot Tyers.[3]
It was later pointed out by Amory Bloch Lovins that the knot had already been presented in Knots for Mountaineering by Phil D. Smith in the 1950s.[4] The tying of the bend was described as a modification to the alpine butterfly bend.[5] Smith had devised the knot in 1943 while working on the San Francisco waterfront and had called it simply a "rigger's bend".[1][3]
Although not documented in the original 1944 print of The Ashley Book of Knots, it was later added in 1979 as entry #1425A.[1]
See also
References
- ^ a b c Ashley, Clifford W. (1993) [1944], The Ashley Book of Knots, New York: Doubleday, pp. 260–261, ISBN 0-385-04025-3
- ^ Howard, Philip (6 Oct 1978) "Doctor ties up his claim to fame", in The Times (includes information from Inspector Geoffrey Budworth)
- ^ a b Budworth, Geoffrey (2002), Much Ado About Knotting: A History of the International Guild of Knot Tyers (2nd ed.), Needham Market, UK: Gipping Press, p. 5, ISBN 0-9515506-5-9
- ^ Budworth, Geoffrey (1985) [1983], The Knot Book, New York: Sterling Publishing, p. 127
- ^ Smith, Phil D. (1955) [1953]. Knots for Mountaineering, Camping, Utility, Rescue, etc. Twentynine Palms, CA: Desert Trail.
