Road-holding: Difference between revisions
Minor improvements added. |
More precise formulation invoked. |
||
| Line 7: | Line 7: | ||
As a more sophisticated means for improving road-holding, [[active suspension]] – involving [[sensors]], [[actuators]] and [[microcontrollers]] – may also serve.<ref>Bharali, J., Garg, N.: ''Efficient ride quality and road holding improvement for active suspension system.'' In: ''14th IEEE India Council International Conference (INDICON), December 15-17, 2017, Roorkee, India. IEEE 2018, pp. 1179-1184.</ref> |
As a more sophisticated means for improving road-holding, [[active suspension]] – involving [[sensors]], [[actuators]] and [[microcontrollers]] – may also serve.<ref>Bharali, J., Garg, N.: ''Efficient ride quality and road holding improvement for active suspension system.'' In: ''14th IEEE India Council International Conference (INDICON), December 15-17, 2017, Roorkee, India. IEEE 2018, pp. 1179-1184.</ref> |
||
For vehicle speeds above approximately 40 meters per second, the effects of aerodynamic forces of a |
For vehicle speeds above approximately 40 meters per second, the effects of aerodynamic forces of an automobile (that is not designed in a too odd way) tend to become sensible for its road-holding.<ref>Doniselli, C. et al.: ''Aerodynamic effects on ride comfort and road holding of automobiles.'' In: ''International Journal of Vehicle Mechanics and Mobility.'' Vol. 25, Issue Suppl. 1, pp. 99-125, 1996.</ref> |
||
== See also == |
== See also == |
||
Revision as of 17:42, 21 March 2021
Road-holding – also written as Roadholding and Road holding – (in French being called "tenue de route", in German "das Halten der Spur"), or road behavior, is essentially determined by the ability of a vehicle to stay on the road and on a desired trajectory of motion, whatever the circumstances (in curves, on greasy, wet or low-grip ground, loaded or not, etc.) may be, but also by the degree of ease that a driver may sense in controlling it in an emergency situation.[1] (Hereby, the laws of nature as a framework, including the gravitational field of the planet „Earth“ as well as the phenomenon of inertia, are tacitly assumed as given.)
In the above context, the straight-line stability of a vehicle – which is concomitant with its ability to stay on a desired trajectory of motion – necessitates a certain degree of understeering.[2]
The capability to smooth down the road imperfections, affects both the comfort and the road-holding of a vehicle. To improve comfort in this regard means, basically, to limit the vertical acceleration fluctuations of the vehicle body and hence of passengers. To improve road-holding means, among other things, to limit the fluctuations of the vertical force that each tire exchanges with the road. Therefore, modeling and simulation using realistic suspension-damping models, taking the vehicle tires into account, offer a straight-forward opportunity for road-holding improvement of vehicles.[3] Optimization techniques for this purpose are also known.[4] The application of inerters is a very new possibility in this regard, although this technology is more destined to race cars than to ordinary vehicle applications.[5]
As a more sophisticated means for improving road-holding, active suspension – involving sensors, actuators and microcontrollers – may also serve.[6]
For vehicle speeds above approximately 40 meters per second, the effects of aerodynamic forces of an automobile (that is not designed in a too odd way) tend to become sensible for its road-holding.[7]
See also
References
- ^ Campbell, C.: Automobile suspensions. Chapman&Hall, London 1981, pp. 105 f.
- ^ Campbell, C.: Automobile suspensions. Chapman&Hall, London 1981, p. 106.
- ^ Guiggiani, M.: The science of vehicle dynamics: handling, braking, and ride of road and race cars. 2nd edition. Springer, Cham [2018], ISBN 978-3-319-73219-0, pp. 417-460.
- ^ Shirahatti, A., Prasad, P. S. S.: Optimal design of passenger car suspension for ride and road holding. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol. 30, Fasc. 1, pp. 66-76, 2008.
- ^ Guiggiani, M.: The science of vehicle dynamics: handling, braking, and ride of road and race cars. 2nd edition. Springer, Cham [2018], ISBN 978-3-319-73219-0, p. 426.
- ^ Bharali, J., Garg, N.: Efficient ride quality and road holding improvement for active suspension system. In: 14th IEEE India Council International Conference (INDICON), December 15-17, 2017, Roorkee, India. IEEE 2018, pp. 1179-1184.
- ^ Doniselli, C. et al.: Aerodynamic effects on ride comfort and road holding of automobiles. In: International Journal of Vehicle Mechanics and Mobility. Vol. 25, Issue Suppl. 1, pp. 99-125, 1996.
 | This engineering-related article is a stub. You can help Wikipedia by expanding it. |