Jump to content

Compass saw: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Line 15: Line 15:


==Characteristics==
==Characteristics==
Compass saws have a narrow, tapered blade usually ending in a sharp point, typically with a tooth pitch of 2.5 to 3 mm (eight to ten teeth per inch,<ref name=wonkee/>) but down to 1.3 mm (up to twenty teeth per inch) for harder materials and as long as 5 mm (few as five teeth per inch) for softer materials.<ref name=wisegeek/> They have a curved, light "[[pistol grip]]" handle, designed for work in confined spaces and overhead.<ref name=wonkee/>
Compass saws have a narrow, tapered blade usually ending in a sharp point, typically with a tooth pitch of 2.5 to 3 mm (eight to ten teeth per inch,<ref name=wonkee/>) but down to 1.3 mm (up to 20 teeth per inch) for harder materials and as long as 5 mm (few as five teeth per inch) for softer materials.<ref name=wisegeek/> They have a curved, light "[[pistol grip]]" handle, designed for work in confined spaces and overhead.<ref name=wonkee/>


The blade of a compass saw may be fixed or retractable, and are typically interchangeable. Partially retracting the blade can prevent flexing and breaking when cutting harder materials.<ref name=wisegeek/>
The blade of a compass saw may be fixed or retractable, and are typically interchangeable. Partially retracting the blade can prevent flexing and breaking when cutting harder materials.<ref name=wisegeek/>

Revision as of 04:32, 11 April 2021

A compass saw

A compass saw is a type of saw used for making curved cuts known as compasses, particularly in confined spaces where a larger saw would not fit.[1][2]

Characteristics

Compass saws have a narrow, tapered blade usually ending in a sharp point, typically with a tooth pitch of 2.5 to 3 mm (eight to ten teeth per inch,[2]) but down to 1.3 mm (up to 20 teeth per inch) for harder materials and as long as 5 mm (few as five teeth per inch) for softer materials.[1] They have a curved, light "pistol grip" handle, designed for work in confined spaces and overhead.[2]

The blade of a compass saw may be fixed or retractable, and are typically interchangeable. Partially retracting the blade can prevent flexing and breaking when cutting harder materials.[1]

Compass saws are suitable for cutting softer woods, plastic, drywall, and non-ferrous metals.[1][2] The pointed tip of the blade can be used to penetrate softer materials without the need for a pilot hole.[1]

Comparison with other types of saws

Compared with other saws designed for cutting curves, such as coping or fretsaws, compass saws have a larger blade and longer pitch (fewer teeth per inch). This allows them to cut faster, and to cut through thicker materials, but leaves a rougher finish.[2]

Compared with drywall saws, compass saws typically have a longer blade – at 15 to 30 centimetres (5.9 to 12 in) – and shorter pitch (more teeth per inch).[1][2]

Keyhole saws, also called padsaws or jab saws, feature shorter, finer blades and (often) straight handles, and are suitable for cutting extremely tight curves.[2][3]

References

  1. ^ a b c d e f "What is a Compass Saw?". WiseGeek. Retrieved 7 October 2015.
  2. ^ a b c d e f g "What is a compass saw?". Wonkee Donkee. Retrieved 7 October 2015.
  3. ^ "Keyhole saw". The Worlds of David Darling: Encyclopedia of Alternative Energy. Retrieved 7 October 2015.