Selective surface: Difference between revisions

Content deleted Content added

Inline

Revision as of 01:22, 1 February 2007

In solar thermal collectors, a selective surface is a means of increasing it's operation temperature and/or efficiency. The selectivity is defined as the ratio of radiation-absorption (alpha) to radiation-emission (epsilon),. Selective surfaces take advantage of the differing wavelengths of incident solar radiation and the emmissive radiation from the absorbing surface.

Normally, a combination of materials is used. One of the first selective surfaces investigated was simply copper with a layer of black cupric oxide. Black chromium ("black chrome") nickel-plated copper is another selective surface that is very durable, highly resistant to humidity or oxidizing atmospheres and extreme temperatures while being able to retain its selective properties - but expensive. Another combination consists of steel plated with gold, silicon, and silicon dioxide. Ordinary steel or aluminum can also be spray-painted black for a cheaper (but less effective) collector surface.

Typical values for a selective surface might be 0.90 absorption and 0.10 emissivity. but can range from 0.8/0.3 for paints on metal to 0.96/0.05 for commercial surfaces and emissivities as low as 0.02 have been obtained in laboratories.

External links

Selective Surface for efficient Solar Thermal Conversion

This article about energy, its collection, its distribution, or its uses is a stub. You can help Wikipedia by expanding it.

@@ Line 3: / Line 3: @@
 Normally, a combination of materials is used.  One of the first selective surfaces investigated was simply [[copper]] with a layer of black [[cupric oxide]].  [[Black]] [[chromium]] ("black chrome") [[nickel]]-plated [[copper]] is another selective surface that is very durable, highly resistant to [[humidity]] or [[oxidizing]] atmospheres and extreme [[temperature]]s while being able to retain its selective properties - but expensive.  Another combination consists of [[steel]] plated with [[gold]], [[silicon]], and [[silicon dioxide]].  Ordinary [[steel]] or [[aluminum]] can also be [[Spray painting|spray-painted]] black for a cheaper (but less effective) collector surface.
-Typical values for a selective surface might be 0.90 absorption and 0.10 emissivity.
+Typical values for a selective surface might be 0.90 absorption and 0.10 emissivity. but can range from 0.8/0.3 for paints on metal to 0.96/0.05 for commercial surfaces and emissivities as low as 0.02 have been obtained in laboratories.
 ==See also==