M17 (amateur radio): Difference between revisions
Arrowsmaster (talk | contribs) No edit summary |
Arrowsmaster (talk | contribs) m Arrowsmaster moved page Draft:M17 (amateur radio) to M17 (amateur radio): autoconfirmed user, don't have to wait for the AfC to clear |
(No difference)
|
Revision as of 21:25, 17 January 2022
This article, M17 (amateur radio), has recently been created via the Articles for creation process. Please check to see if the reviewer has accidentally left this template after accepting the draft and take appropriate action as necessary.
Reviewer tools: Inform author |
M17 is a digital radio modulation mode developed by Wojciech Kaczmarski SP5WWP et al.[1][2][3][4][5][6] M17 is primarily designed for voice communications on VHF amateur radio band and above.
Overview
M17 utilizes 4800 symbols per second 4FSK with a root Nyquist filter applied to the bitstream. Radio channels are 9 kHz wide, with channel spacing of 12.5 kHz. The protocol's specification is released under GNU General Public License. The gross data rate is 9600 bits per second, with the actual data transfer at 3200. Protocol allows for low-speed data transfer (along with voice), e.g. GNSS position data. The mode has been successfully transmitted through EchoStar XXI geostationary satellite.[7] M17 has received the 2021 ARRL Technical Innovation Award.[8] It has also received a grant from the Amateur Radio Digital Communications.[9]
Voice encoding
M17 uses Codec 2, a low bitrate voice codec developed by David Rowe VK5DGR et al. Codec 2 was designed to be used for amateur radio and other high compression voice applications. The protocol supports both 3200 (full-rate) and 1600 bits per second (half-rate) modes.
Error control
Three methods are used for error control: binary Golay code, punctured convolutional code and bit interleaving. Additionally, bits of data are XORed with a predefined decorrelating pseudorandom stream before transmission. This ensures that there are as many symbol transitions in the baseband as possible.
Hardware support
TYT MD-380, MD-390 and MD-UV380 handheld transceivers can be reflashed with a custom, free, open source firmware[10] to enable M17 support.
Bridging with other modes
Links to DMR and System Fusion exist.[11]
M17 over IP
Access nodes and repeaters can be linked using reflectors. Over 100 M17 reflectors exist worldwide (Jan 2022).[12]
See also
References
- ^ Dan Romanchik's (KB6NU) blog entry on M17 Project (Nov 2019)
- ^ "Świat Radio" magazine, issue 11/2020, p. 50: "Transceiver TR-9", an article covering M17 (Polish)
- ^ Ham Radio 2.0 podcast, "M17 Project - New Ham Radio Digital Mode" episode (Sep 2021)
- ^ Linux in the Ham Shack podcast, episode 396: "M17 Deep Dive" (Mar 2021)
- ^ David Rowe's (VK5DGR) "M17 Open Source Radio" blog entry (Aug 2020)
- ^ "M17 Open Source Digital Radio System", Ham Radio Workbench podcast (Dec 2019)
- ^ Testing M17 on Echostar XXI at 10° East
- ^ ARRL Board of Directors Bestows Awards
- ^ ARDC grants 250,000 USD to M17 Project (Apr 2021)
- ^ OpenRTX - free and open source firmware for ham radios
- ^ Douglas McLain's (AD8DP) GitHub page
- ^ M17 reflectors list