Tripod mast: Difference between revisions
Freeman501 (talk | contribs) m →History: Provided internal link to Royal Navy. |
|||
| Line 1: | Line 1: | ||
{{ |
{{More citations needed|date=September 2014}} |
||
[[File:Battleship Texas - exterior - DSCN0084.JPG|thumb|Tripod mast, as here on {{USS|Texas|BB-35|6}}, were strong enough to carry heavy equipment such as searchlights, radar and the spotting top high up]] |
[[File:Battleship Texas - exterior - DSCN0084.JPG|thumb|Tripod mast, as here on {{USS|Texas|BB-35|6}}, were strong enough to carry heavy equipment such as searchlights, radar and the spotting top high up]] |
||
The '''tripod mast''' is a type of [[mast (sailing)|mast]] used on warships from the [[Edwardian era]] onwards, replacing the pole mast. Tripod masts are distinctive using two large (usually cylindrical) support [[column]]s spread out at angles to brace another (usually vertical) column. |
The '''tripod mast''' is a type of [[mast (sailing)|mast]] used on warships from the [[Edwardian era]] onwards, replacing the pole mast. Tripod masts are distinctive using two large (usually cylindrical) support [[column]]s spread out at angles to brace another (usually vertical) column. |
||
| Line 7: | Line 7: | ||
These masts used three large cylindrical tubes or columns to form the mast. The tubes provided structural cross-bracing and a stiff structure, but were still structurally efficient and reasonably lightweight. |
These masts used three large cylindrical tubes or columns to form the mast. The tubes provided structural cross-bracing and a stiff structure, but were still structurally efficient and reasonably lightweight. |
||
Tripod masts were predated by pole masts. |
Tripod masts were predated by pole masts. |
||
The [[Royal Navy]] moved to the tripod mast from pole masts with their last [[pre-dreadnought]] ([[Lord Nelson-class battleship|''Lord Nelson'' class]]) and the first [[dreadnought battleship]], [[HMS Dreadnought (1906)|HMS ''Dreadnought'']] (launched in 1906) and thereafter in their later battleships and battlecruisers. |
The [[Royal Navy]] moved to the tripod mast from pole masts with their last [[pre-dreadnought]] ([[Lord Nelson-class battleship|''Lord Nelson'' class]]) and the first [[dreadnought battleship]], [[HMS Dreadnought (1906)|HMS ''Dreadnought'']] (launched in 1906) and thereafter in their later battleships and battlecruisers. |
||
[[File:Arizona (BB39) Port Bow, Underway - NARA - 5900075 - 1930.jpg |thumb|{{USS|Arizona|BB-39|6}}'s original 1923 lattice masts]] |
[[File:Arizona (BB39) Port Bow, Underway - NARA - 5900075 - 1930.jpg |thumb|{{USS|Arizona|BB-39|6}}'s original 1923 lattice masts]] |
||
[[File:USS_Arizona_after_1931_modernization_NARA_19-LC-19B-1.jpg |thumb| |
[[File:USS_Arizona_after_1931_modernization_NARA_19-LC-19B-1.jpg |thumb|USS ''Arizona''{{'}}s 1931 tripod mast refit]] |
||
The [[United States Navy]] preferred the lightweight [[lattice mast]], which used an array of thin columns at angles, crossing each other in a double helical spiral configuration in a form of [[hyperboloid structure]]. These were used on their first dreadnought battleships launched in 1908. The US were the only significant users of lattice masts. Eventually, these structures proved less structurally sound than intended. On January 15, 1918, {{USS|Michigan|BB-27|6}} had a lattice mast collapse in an intense storm. |
The [[United States Navy]] preferred the lightweight [[lattice mast]], which used an array of thin columns at angles, crossing each other in a double helical spiral configuration in a form of [[hyperboloid structure]]. These were used on their first dreadnought battleships launched in 1908. The US were the only significant users of lattice masts. Eventually, these structures proved less structurally sound than intended. On January 15, 1918, {{USS|Michigan|BB-27|6}} had a lattice mast collapse in an intense storm. |
||
Beginning in the 1930s, the US Navy started refitting their battleships and other capital ships with the more robust tripod mast design. |
Beginning in the 1930s, the US Navy started refitting their battleships and other capital ships with the more robust tripod mast design. |
||
The tripod mast structure, continued in use until stealth designs started to move away from open masts entirely in the 2000s.{{citation needed|date=December 2013}} The Royal Navy began using plated-in masts or "macks" in the early 1960s, either as new construction or by refit, such as that of {{HMS|Salisbury|F32|6}} in 1962.<ref>Marriott, Leo, ''Royal Navy Frigates, 1945-1983'', Ian Allan Ltd., p.50</ref> |
The tripod mast structure, continued in use until stealth designs started to move away from open masts entirely in the 2000s.{{citation needed|date=December 2013}} The Royal Navy began using plated-in masts or "macks" in the early 1960s, either as new construction or by refit, such as that of {{HMS|Salisbury|F32|6}} in 1962.<ref>Marriott, Leo, ''Royal Navy Frigates, 1945-1983'', Ian Allan Ltd., p.50</ref> |
||
[[File:USS Arleigh Burke (DDG 51) steams through the Mediterranean Sea.jpg |thumb| |
[[File:USS Arleigh Burke (DDG 51) steams through the Mediterranean Sea.jpg |thumb|The {{Sclass|Arleigh Burke|destroyer|1}}s have a modern form of tripod mast]] |
||
==See also== |
==See also== |
||
Revision as of 10:20, 22 February 2022
 | This article needs additional citations for verification. (September 2014) |
The tripod mast is a type of mast used on warships from the Edwardian era onwards, replacing the pole mast. Tripod masts are distinctive using two large (usually cylindrical) support columns spread out at angles to brace another (usually vertical) column.
History
The masts were intended to provide a raised platform for visual observers and for fire control equipment, elevated up above the main hull for visibility and to reduce the risk of shell damage to the gear and crews. These masts used three large cylindrical tubes or columns to form the mast. The tubes provided structural cross-bracing and a stiff structure, but were still structurally efficient and reasonably lightweight.
Tripod masts were predated by pole masts.
The Royal Navy moved to the tripod mast from pole masts with their last pre-dreadnought (Lord Nelson class) and the first dreadnought battleship, HMS Dreadnought (launched in 1906) and thereafter in their later battleships and battlecruisers.
_Port_Bow,_Underway_-_NARA_-_5900075_-_1930.jpg)
The United States Navy preferred the lightweight lattice mast, which used an array of thin columns at angles, crossing each other in a double helical spiral configuration in a form of hyperboloid structure. These were used on their first dreadnought battleships launched in 1908. The US were the only significant users of lattice masts. Eventually, these structures proved less structurally sound than intended. On January 15, 1918, USS Michigan had a lattice mast collapse in an intense storm. Beginning in the 1930s, the US Navy started refitting their battleships and other capital ships with the more robust tripod mast design.
The tripod mast structure, continued in use until stealth designs started to move away from open masts entirely in the 2000s.[citation needed] The Royal Navy began using plated-in masts or "macks" in the early 1960s, either as new construction or by refit, such as that of HMS Salisbury in 1962.[1]
_steams_through_the_Mediterranean_Sea.jpg)
See also
References
- ^ Marriott, Leo, Royal Navy Frigates, 1945-1983, Ian Allan Ltd., p.50