Jump to content

Working directory: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
m Reverted edits by 174.240.161.24 (talk) to last version by TriskySeskel
→In operating systems: Removed self-reference
Line 21: Line 21:
The working directory is also displayed by the <kbd>$P</kbd><ref group="nb" name="NB_PROMPT"/> token of the <code>[[PROMPT (DOS command)|PROMPT]]</code> command <ref name="Caldera_1998_USER"/> To keep the prompt short even inside of deep subdirectory structures, the DR-DOS 7.07 COMMAND.COM supports a <kbd>$W</kbd><ref group="nb" name="NB_PROMPT"/> token to display only the deepest subdirectory level. So, where a default <kbd>PROMPT $P$G</kbd> would result f.e. in <code>C:\DOS></code> or <code>C:\DOS\DRDOS></code>, a <kbd>PROMPT $N:$W$G</kbd> would instead yield <code>C:DOS></code> and <code>C:DRDOS></code>, respectively. A similar facility (using <kbd>$W</kbd> and <kbd>$w</kbd>) was added to [[4DOS]] as well.<ref name="4DOS_8.00_HELP"/>
The working directory is also displayed by the <kbd>$P</kbd><ref group="nb" name="NB_PROMPT"/> token of the <code>[[PROMPT (DOS command)|PROMPT]]</code> command <ref name="Caldera_1998_USER"/> To keep the prompt short even inside of deep subdirectory structures, the DR-DOS 7.07 COMMAND.COM supports a <kbd>$W</kbd><ref group="nb" name="NB_PROMPT"/> token to display only the deepest subdirectory level. So, where a default <kbd>PROMPT $P$G</kbd> would result f.e. in <code>C:\DOS></code> or <code>C:\DOS\DRDOS></code>, a <kbd>PROMPT $N:$W$G</kbd> would instead yield <code>C:DOS></code> and <code>C:DRDOS></code>, respectively. A similar facility (using <kbd>$W</kbd> and <kbd>$w</kbd>) was added to [[4DOS]] as well.<ref name="4DOS_8.00_HELP"/>


{{anchor|CDS}}Under DOS, the absolute paths of the working directories of all logical volumes are internally stored in an array-like data structure called the [[Current Directory Structure]] (CDS), which gets dynamically allocated at boot time to hold the necessary number of slots for all logical drives (or as defined by [[LASTDRIVE (CONFIG.SYS directive)|LASTDRIVE]]).<ref name="Schulman_1994_Undocumented-DOS"/><ref name="Paul_1997_NWDOSTIP"/><ref name="Brown_2000_RBIL"/> This structure imposes a length-limit of 66 characters on the full path of each working directory, and thus implicitly also limits the maximum possible depth of subdirectories.<ref name="Schulman_1994_Undocumented-DOS"/>
{{anchor|CDS}}Under DOS, the absolute paths of the working directories of all logical volumes are internally stored in an array-like data structure called the Current Directory Structure (CDS), which gets dynamically allocated at boot time to hold the necessary number of slots for all logical drives (or as defined by [[LASTDRIVE (CONFIG.SYS directive)|LASTDRIVE]]).<ref name="Schulman_1994_Undocumented-DOS"/><ref name="Paul_1997_NWDOSTIP"/><ref name="Brown_2000_RBIL"/> This structure imposes a length-limit of 66 characters on the full path of each working directory, and thus implicitly also limits the maximum possible depth of subdirectories.<ref name="Schulman_1994_Undocumented-DOS"/>
[[DOS Plus]] and older issues of DR&nbsp;DOS (up to [[DR&nbsp;DOS 6.0]], with [[BDOS]] 6.7 in 1991) had no such limitation<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/><ref name="4DOS_8.00_HELP"/> due to their implementation using a [[PCMODE|DOS emulation]] on top of a [[Concurrent DOS]]- (and thus [[CP/M-86]]-)derived kernel, which internally organized subdirectories as ''relative'' links to parent directories instead of as ''absolute'' paths.<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/> Since [[PalmDOS]] (with BDOS 7.0) and DR&nbsp;DOS 6.0 (1992 update with BDOS 7.1) and higher switched to use a CDS for [[bug compatibility|maximum compatibility]] with DOS programs as well, they faced the same limitations as present in other DOSes.<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/>
[[DOS Plus]] and older issues of DR&nbsp;DOS (up to [[DR&nbsp;DOS 6.0]], with [[BDOS]] 6.7 in 1991) had no such limitation<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/><ref name="4DOS_8.00_HELP"/> due to their implementation using a [[PCMODE|DOS emulation]] on top of a [[Concurrent DOS]]- (and thus [[CP/M-86]]-)derived kernel, which internally organized subdirectories as ''relative'' links to parent directories instead of as ''absolute'' paths.<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/> Since [[PalmDOS]] (with BDOS 7.0) and DR&nbsp;DOS 6.0 (1992 update with BDOS 7.1) and higher switched to use a CDS for [[bug compatibility|maximum compatibility]] with DOS programs as well, they faced the same limitations as present in other DOSes.<ref name="Paul_1997_NWDOSTIP"/><ref name="Paul_1997_NWDOS7UN"/>


Revision as of 20:17, 14 June 2023

In computing, the working directory of a process is a directory of a hierarchical file system, if any,[nb 1] dynamically associated with each process. It is sometimes called the current working directory (CWD), e.g. the BSD getcwd[1] function, or just current directory.[2] When the process refers to a file using a simple file name or relative path (as opposed to a file designated by a full path from a root directory), the reference is interpreted relative to the working directory of the process. So for example a process with working directory /rabbit-shoes that asks to create the file foo.txt will end up creating the file /rabbit-shoes/foo.txt.

In operating systems

Further information: cd (command) and operating system shell

In most computer file systems, every directory has an entry (usually named ".") which points to the directory itself.

In most DOS and UNIX command shells, as well as in the Microsoft Windows command line interpreters cmd.exe and Windows PowerShell, the working directory can be changed by using the CD or CHDIR commands. In Unix shells, the pwd command outputs a full pathname of the working directory; the equivalent command in DOS and Windows is CD or CHDIR without arguments (whereas in Unix, cd used without arguments takes the user back to his/her home directory).

The environment variable PWD (in Unix/Linux shells), or the pseudo-environment variables CD (in Windows COMMAND.COM and cmd.exe, but not in OS/2 and DOS), or _CWD, _CWDS, _CWP and _CWPS (under 4DOS, 4OS2, 4NT etc.)[3] can be used in scripts, so that one need not start an external program. Microsoft Windows file shortcuts have the ability to store the working directory.

COMMAND.COM in DR-DOS 7.02 and higher provides ECHOS, a variant of the ECHO command omitting the terminating linefeed.[4][3] This can be used to create a temporary batchjob storing the working directory in an environment variable like CD for later use, for example: 

ECHOS SET CD=> SETCD.BAT
CHDIR >> SETCD.BAT
CALL SETCD.BAT
DEL SETCD.BAT

Alternatively, under Multiuser DOS and DR-DOS 7.02 and higher, various internal and external commands support a parameter /B (for "Batch").[5] This modifies the output of commands to become suitable for direct command line input (when redirecting it into a batch file) or usage as a parameter for other commands (using it as input for another command). Where CHDIR would issue a directory path like C:\DOS, a command like CHDIR /B would issue CHDIR C:\DOS instead, so that CHDIR /B > RETDIR.BAT would create a temporary batchjob allowing to return to this directory later on.

The working directory is also displayed by the $P[nb 2] token of the PROMPT command [6] To keep the prompt short even inside of deep subdirectory structures, the DR-DOS 7.07 COMMAND.COM supports a $W[nb 2] token to display only the deepest subdirectory level. So, where a default PROMPT $P$G would result f.e. in C:\DOS> or C:\DOS\DRDOS>, a PROMPT $N:$W$G would instead yield C:DOS> and C:DRDOS>, respectively. A similar facility (using $W and $w) was added to 4DOS as well.[3]

Under DOS, the absolute paths of the working directories of all logical volumes are internally stored in an array-like data structure called the Current Directory Structure (CDS), which gets dynamically allocated at boot time to hold the necessary number of slots for all logical drives (or as defined by LASTDRIVE).[7][8][9] This structure imposes a length-limit of 66 characters on the full path of each working directory, and thus implicitly also limits the maximum possible depth of subdirectories.[7] DOS Plus and older issues of DR DOS (up to DR DOS 6.0, with BDOS 6.7 in 1991) had no such limitation[8][10][3] due to their implementation using a DOS emulation on top of a Concurrent DOS- (and thus CP/M-86-)derived kernel, which internally organized subdirectories as relative links to parent directories instead of as absolute paths.[8][10] Since PalmDOS (with BDOS 7.0) and DR DOS 6.0 (1992 update with BDOS 7.1) and higher switched to use a CDS for maximum compatibility with DOS programs as well, they faced the same limitations as present in other DOSes.[8][10]

In programming languages

Most programming languages provide an interface to the file system functions of the operating system, including the ability to set (change) the working directory of the program.

In the C language, the POSIX function chdir() effects the system call which changes the working directory.[11] Its argument is a text string with a path to the new directory, either absolute or relative to the old one. Where available, it can be called by a process to set its working directory.

There is the same function in other languages. In Visual Basic it is usually spelled CHDIR().

Unlike the Windows API or POSIX C function, neither the Java programming language nor the Java Virtual Machine supports chdir() directly;[clarification needed] a change request remained open for over a decade while the team responsible for Java considered the alternatives, though by 2008 the request was denied after only limited support was introduced (affecting first java.lang.Runtime and later, java.lang.ProcessBuilder ).[12]

See also

Notes

  1. ^ There are operating systems that support a hierarchical file system but have no concept of "working directory"; for example Texas Instruments' DX10, used for the TI-990 series.
  2. ^ a b In the same way as $O works as alternative to $P under DR-DOS COMMAND.COM, $W has an alias $Y except for that it gets suppressed on floppies in order to avoid critical error messages or delays when trying to retrieve the path of a non-inserted floppy.

References

  1. ^ getcwd(3)
  2. ^ "Microsoft Windows – SetCurrentDirectory function". Microsoft. Archived from the original on 2018-05-27. Retrieved 2017-05-27.
  3. ^ a b c d Brothers, Hardin; Rawson, Tom; Conn, Rex C.; Paul, Matthias R.; Dye, Charles E.; Georgiev, Luchezar I. (2002-02-27). 4DOS 8.00 online help.
  4. ^ DR-DOS 7.03 WHATSNEW.TXT — Changes from DR-DOS 7.02 to DR-DOS 7.03. Caldera, Inc. 1998-12-24. Archived from the original on 2019-04-08. Retrieved 2019-04-08.
  5. ^ CCI Multiuser DOS 7.22 GOLD Online Documentation. Concurrent Controls, Inc. (CCI). 1997-02-10. HELP.HLP.
  6. ^ Caldera DR-DOS 7.02 User Guide. Caldera, Inc. 1998 [1993, 1997]. Archived from the original on 2016-11-04. Retrieved 2013-08-10.
  7. ^ a b Schulman, Andrew; Brown, Ralf D.; Maxey, David; Michels, Raymond J.; Kyle, Jim (1994) [November 1993]. Undocumented DOS: A programmer's guide to reserved MS-DOS functions and data structures - expanded to include MS-DOS 6, Novell DOS and Windows 3.1 (2 ed.). Reading, Massachusetts: Addison Wesley. ISBN 0-201-63287-X. ISBN 978-0-201-63287-3. (xviii+856+vi pages, 3.5-inch floppy) Errata: [1][2]
  8. ^ a b c d Paul, Matthias R. (1997-07-30) [1994-05-01]. NWDOS-TIPs — Tips & Tricks rund um Novell DOS 7, mit Blick auf undokumentierte Details, Bugs und Workarounds. Release 157 (in German) (3 ed.). Archived from the original on 2017-09-10. Retrieved 2014-08-06. {{cite book}}: |work= ignored (help) (NB. NWDOSTIP.TXT is a comprehensive work on Novell DOS 7 and OpenDOS 7.01, including the description of many undocumented features and internals. It is part of the author's yet larger MPDOSTIP.ZIP collection maintained up to 2001 and distributed on many sites at the time. The provided link points to a HTML-converted older version of the NWDOSTIP.TXT file.) [3]
  9. ^ Brown, Ralf D.; et al., eds. (2000-07-16). "Ralf Brown's Interrupt List" (61 ed.). INTER61.
  10. ^ a b c Paul, Matthias R. (1997-06-07) [April 1994]. "Chapter 1.3.xi: Überlange Pfade". NWDOS7UN.TXT — Zusammenfassung der dokumentierten und undokumentierten Fähigkeiten von Novell DOS 7. Release 85 (in German). Archived from the original on 2016-11-07. Retrieved 2016-11-07. {{cite book}}: |work= ignored (help)
  11. ^ "The Open Group Base Specifications Issue 6 and IEEE Std 1003.1" (Issue 6, 2004 ed.). The IEEE and The Open Group. 2004 [2001]. Archived from the original on 2018-02-09. Retrieved 2018-05-27.
  12. ^ "JDK-4045688: Add chdir or equivalent notion of changing working directory". Bug Database. Oracle (Sun Microsystems). 2008-08-18 [1997-04-17]. Archived from the original on 2017-10-19. Retrieved 2011-02-20.

Further reading

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Working_directory&oldid=1160168248"