Silver oxide battery

For the rechargeable cell based on silver(I,III) oxide and zinc, see Silver zinc battery.

Silver oxide battery

Silver oxide cells
Specific energy	130 Wh/kg
Energy density	500 Wh/L
Specific power	High
Charge/discharge efficiency	N/A
Energy/consumer-price	Low
Time durability	High
Cycle durability	N/A
Nominal cell voltage	1.55V

Several sizes of button and coin cells, some of which are silver oxide

A silver oxide battery (IEC code: S) is a primary cell using silver oxide as the cathode material and zinc for the anode. These cells maintain a nearly constant nominal voltage during discharge until fully depleted. They are available in small sizes as button cells, where the amount of silver used is minimal and not a prohibitively expensive contributor to the overall product cost.

Silver oxide primary batteries account for 30% of all primary battery sales in Japan (64 out of 212 million in February 2020).

Large silver oxide batteries were used on early ICBM's and satellites such Corona, and later, on the lunar module and lunar rover power supplies because of their high energy-to-weight ratio.

Chemistry

A silver oxide battery uses silver(I) oxide as the positive electrode (cathode), zinc as the negative electrode (anode), plus an alkaline electrolyte, usually sodium hydroxide (NaOH) or potassium hydroxide (KOH). The silver is reduced at the cathode from Ag(I) to Ag, and the zinc is oxidized from Zn to Zn(II).

The half-cell reaction at the positive plate:

${\ce {Ag2O + H2O + 2e- -> 2Ag (v) + 2OH-}}$, $(E^{\circ }=+0.34{\text{ V}})$

The half-cell reaction at the negative plate:

${\ce {{Zn}+2OH^{-}->{\overset {Zinc~hydroxide}{Zn(OH)2}}+2e-}}$, $(E^{\circ }=-1.22{\text{ V}})$

Overall reaction:

${\ce {Zn + H2O + Ag2O -> Zn(OH)2 + 2Ag(v)}}$, $(E^{\circ }=+1.56{\text{ V}})$

Overall reaction (anhydrous form):

${\ce {Zn + Ag2O ->[{\ce {KOH/NaOH}}] ZnO + 2Ag (v)}}$

Mercury content

Silver oxide battery used to power a quartz watch movement; battery is marked as containing no mercury

When first commercialized, all silver oxide batteries contained up to 0.2% mercury, incorporated into the zinc anode to inhibit corrosion from the alkaline environment. This corrosion would occur regardless of whether or not the battery was providing power, but shelf life was an important consideration when specifying silver oxide batteries. Sony started producing the first silver oxide batteries without added mercury in 2004.

See also

• Battery nomenclature
• Battery recycling
• Comparison of battery types
• Fuel cell
• History of the battery
• List of battery sizes
• List of battery types

External links

• SR (Silver Oxide Battery) from Maxell