This code has minimal Hamming distance 15 and corrects 7 errors. It has 1 data bit and 14 checksum bits. It is also denoted as: '''(15, 1) BCH''' code. In fact, this code has only two codewords: 000000000000000 and 111111111111111 (a trivial repetition code).
This code has minimal Hamming distance 15 and corrects 7 errors. It has 1 data bit and 14 checksum bits. It is also denoted as: '''(15, 1) BCH''' code. In fact, this code has only two codewords: 000000000000000 and 111111111111111 (a trivial [[repetition code]]).
One of the key features of BCH codes is that during code design, there is a precise control over the number of symbol errors correctable by the code. In particular, it is possible to design binary BCH codes that can correct multiple bit errors. Another advantage of BCH codes is the ease with which they can be decoded, namely, via an algebraic method known as syndrome decoding. This simplifies the design of the decoder for these codes, using small low-power electronic hardware.
Given a prime numberq and prime powerqm with positive integers m and d such that d ≤ qm − 1, a primitive narrow-sense BCH code over the finite field (or Galois field) GF(q) with code length n = qm − 1 and distance at least d is constructed by the following method.
Let α be a primitive element of GF(qm).
For any positive integer i, let mi(x) be the minimal polynomial with coefficients in GF(q) of αi.
The generator polynomial of the BCH code is defined as the least common multipleg(x) = lcm(m1(x),…,md − 1(x)).
It can be seen that g(x) is a polynomial with coefficients in GF(q) and divides xn − 1.
Therefore, the polynomial code defined by g(x) is a cyclic code.
Example
Let q = 2 and m = 4 (therefore n = 15). We will consider different values of d for GF(16) = GF(24) based on the reducing polynomial z4 + z + 1, using primitive element α(z) = z. There are fourteen minimum polynomials mi(x) with coefficients in GF(2) satisfying
The minimal polynomials are
The BCH code with has the generator polynomial
It has minimal Hamming distance at least 3 and corrects up to one error. Since the generator polynomial is of degree 4, this code has 11 data bits and 4 checksum bits. It is also denoted as: (15, 11) BCH code.
The BCH code with has the generator polynomial
It has minimal Hamming distance at least 5 and corrects up to two errors. Since the generator polynomial is of degree 8, this code has 7 data bits and 8 checksum bits. It is also denoted as: (15, 7) BCH code.
The BCH code with has the generator polynomial
It has minimal Hamming distance at least 7 and corrects up to three errors. Since the generator polynomial is of degree 10, this code has 5 data bits and 10 checksum bits. It is also denoted as: (15, 5) BCH code. (This particular generator polynomial has a real-world application, in the "format information" of the QR code.)
The BCH code with and higher has the generator polynomial
This code has minimal Hamming distance 15 and corrects 7 errors. It has 1 data bit and 14 checksum bits. It is also denoted as: (15, 1) BCH code. In fact, this code has only two codewords: 000000000000000 and 111111111111111 (a trivial repetition code).
General BCH codes
General BCH codes differ from primitive narrow-sense BCH codes in two respects.
First, the requirement that be a primitive element of can be relaxed. By relaxing this requirement, the code length changes from to the order of the element
Second, the consecutive roots of the generator polynomial may run from instead of
Definition. Fix a finite field where is a prime power. Choose positive integers such that and is the multiplicative order of modulo
Note: if as in the simplified definition, then is 1, and the order of modulo is
Therefore, the simplified definition is indeed a special case of the general one.
Special cases
A BCH code with is called a narrow-sense BCH code.
A BCH code with is called primitive.
The generator polynomial of a BCH code has coefficients from
In general, a cyclic code over with as the generator polynomial is called a BCH code over
The BCH code over and generator polynomial with successive powers of as roots is one type of Reed–Solomon code where the decoder (syndromes) alphabet is the same as the channel (data and generator polynomial) alphabet, all elements of .[6] The other type of Reed Solomon code is an original view Reed Solomon code which is not a BCH code.
Properties
The generator polynomial of a BCH code has degree at most . Moreover, if and , the generator polynomial has degree at most .
Proof
Each minimal polynomial has degree at most . Therefore, the least common multiple of of them has degree at most . Moreover, if then for all . Therefore, is the least common multiple of at most minimal polynomials for odd indices each of degree at most .
A BCH code has minimal Hamming distance at least .
Proof
Suppose that is a code word with fewer than non-zero terms. Then
Recall that are roots of hence of . This implies that satisfy the following equations, for each :
which is non-zero. It therefore follows that hence
A BCH code is cyclic.
Proof
A polynomial code of length is cyclic if and only if its generator polynomial divides Since is the minimal polynomial with roots it suffices to check that each of is a root of This follows immediately from the fact that is, by definition, an th root of unity.
Encoding
Because any polynomial that is a multiple of the generator polynomial is a valid BCH codeword, BCH encoding is merely the process of finding some polynomial that has the generator as a factor.
The BCH code itself is not prescriptive about the meaning of the coefficients of the polynomial; conceptually, a BCH decoding algorithm's sole concern is to find the valid codeword with the minimal Hamming distance to the received codeword. Therefore, the BCH code may be implemented either as a systematic code or not, depending on how the implementor chooses to embed the message in the encoded polynomial.
Non-systematic encoding: The message as a factor
The most straightforward way to find a polynomial that is a multiple of the generator is to compute the product of some arbitrary polynomial and the generator. In this case, the arbitrary polynomial can be chosen using the symbols of the message as coefficients.
As an example, consider the generator polynomial , chosen for use in the (31, 21) binary BCH code used by POCSAG and others. To encode the 21-bit message {101101110111101111101}, we first represent it as a polynomial over :
Then, compute (also over ):
Thus, the transmitted codeword is {1100111010010111101011101110101}.
The receiver can use these bits as coefficients in and, after error-correction to ensure a valid codeword, can recompute
Systematic encoding: The message as a prefix
A systematic code is one in which the message appears verbatim somewhere within the codeword. Therefore, systematic BCH encoding involves first embedding the message polynomial within the codeword polynomial, and then adjusting the coefficients of the remaining (non-message) terms to ensure that is divisible by .
This encoding method leverages the fact that subtracting the remainder from a dividend results in a multiple of the divisor. Hence, if we take our message polynomial as before and multiply it by (to "shift" the message out of the way of the remainder), we can then use Euclidean division of polynomials to yield:
Here, we see that is a valid codeword. As is always of degree less than (which is the degree of ), we can safely subtract it from without altering any of the message coefficients, hence we have our as
Over (i.e. with binary BCH codes), this process is indistinguishable from appending a cyclic redundancy check, and if a systematic binary BCH code is used only for error-detection purposes, we see that BCH codes are just a generalization of the mathematics of cyclic redundancy checks.
The advantage to the systematic coding is that the receiver can recover the original message by discarding everything after the first coefficients, after performing error correction.
Decoding
There are many algorithms for decoding BCH codes. The most common ones follow this general outline:
Calculate the syndromes sj for the received vector
Determine the number of errors t and the error locator polynomial Λ(x) from the syndromes
Calculate the roots of the error location polynomial to find the error locations Xi
Calculate the error values Yi at those error locations
Correct the errors
During some of these steps, the decoding algorithm may determine that the received vector has too many errors and cannot be corrected. For example, if an appropriate value of t is not found, then the correction would fail. In a truncated (not primitive) code, an error location may be out of range. If the received vector has more errors than the code can correct, the decoder may unknowingly produce an apparently valid message that is not the one that was sent.
Calculate the syndromes
The received vector is the sum of the correct codeword and an unknown error vector The syndrome values are formed by considering as a polynomial and evaluating it at Thus the syndromes are[7]
for to
Since are the zeros of of which is a multiple, Examining the syndrome values thus isolates the error vector so one can begin to solve for it.
If there is no error, for all If the syndromes are all zero, then the decoding is done.
Calculate the error location polynomial
If there are nonzero syndromes, then there are errors. The decoder needs to figure out how many errors and the location of those errors.
If there is a single error, write this as where is the location of the error and is its magnitude. Then the first two syndromes are
so together they allow us to calculate and provide some information about (completely determining it in the case of Reed–Solomon codes).
If there are two or more errors,
It is not immediately obvious how to begin solving the resulting syndromes for the unknowns and
The first step is finding, compatible with computed syndromes and with minimal possible locator polynomial:
Peterson's algorithm is the step 2 of the generalized BCH decoding procedure. Peterson's algorithm is used to calculate the error locator polynomial coefficients of a polynomial
Now the procedure of the Peterson–Gorenstein–Zierler algorithm.[8] Expect we have at least 2t syndromes sc, …, sc+2t−1. Let v = t.
Start by generating the matrix with elements that are syndrome values
Generate a vector with elements
Let denote the unknown polynomial coefficients, which are given by
Form the matrix equation
If the determinant of matrix is nonzero, then we can actually find an inverse of this matrix and solve for the values of unknown values.
If then follow
if
then
declare an empty error locator polynomial
stop Peterson procedure.
end
set
continue from the beginning of Peterson's decoding by making smaller
After you have values of , you have the error locator polynomial.
Stop Peterson procedure.
Factor error locator polynomial
Now that you have the polynomial, its roots can be found in the form by brute force for example using the Chien search algorithm. The exponential
powers of the primitive element will yield the positions where errors occur in the received word; hence the name 'error locator' polynomial.
The zeros of Λ(x) are α−i1, …, α−iv.
Calculate error values
Once the error locations are known, the next step is to determine the error values at those locations. The error values are then used to correct the received values at those locations to recover the original codeword.
For the case of binary BCH, (with all characters readable) this is trivial; just flip the bits for the received word at these positions, and we have the corrected code word. In the more general case, the error weights can be determined by solving the linear system
Forney algorithm
However, there is a more efficient method known as the Forney algorithm.
This formula is advantageous when one computes the formal derivative of form
yielding:
where
Decoding based on extended Euclidean algorithm
An alternate process of finding both the polynomial Λ and the error locator polynomial is based on Yasuo Sugiyama's adaptation of the Extended Euclidean algorithm.[10] Correction of unreadable characters could be incorporated to the algorithm easily as well.
Let be positions of unreadable characters. One creates polynomial localising these positions
Set values on unreadable positions to 0 and compute the syndromes.
As we have already defined for the Forney formula let
Let us run extended Euclidean algorithm for locating least common divisor of polynomials and
The goal is not to find the least common divisor, but a polynomial of degree at most and polynomials such that
Low degree of guarantees, that would satisfy extended (by ) defining conditions for
Defining and using on the place of in the Fourney formula will give us error values.
The main advantage of the algorithm is that it meanwhile computes required in the Forney formula.
Explanation of the decoding process
The goal is to find a codeword which differs from the received word minimally as possible on readable positions. When expressing the received word as a sum of nearest codeword and error word, we are trying to find error word with minimal number of non-zeros on readable positions. Syndrom restricts error word by condition
We could write these conditions separately or we could create polynomial
and compare coefficients near powers to
Suppose there is unreadable letter on position we could replace set of syndromes by set of syndromes defined by equation Suppose for an error word all restrictions by original set of syndromes hold,
than
New set of syndromes restricts error vector
the same way the original set of syndromes restricted the error vector Except the coordinate where we have an is zero, if For the goal of locating error positions we could change the set of syndromes in the similar way to reflect all unreadable characters. This shortens the set of syndromes by
In polynomial formulation, the replacement of syndromes set by syndromes set leads to
Therefore,
After replacement of by , one would require equation for coefficients near powers
One could consider looking for error positions from the point of view of eliminating influence of given positions similarly as for unreadable characters. If we found positions such that eliminating their influence leads to obtaining set of syndromes consisting of all zeros, than there exists error vector with errors only on these coordinates.
If denotes the polynomial eliminating the influence of these coordinates, we obtain
In Euclidean algorithm, we try to correct at most errors (on readable positions), because with bigger error count there could be more codewords in the same distance from the received word. Therefore, for we are looking for, the equation must hold for coefficients near powers starting from
In Forney formula, could be multiplied by a scalar giving the same result.
It could happen that the Euclidean algorithm finds of degree higher than having number of different roots equal to its degree, where the Fourney formula would be able to correct errors in all its roots, anyway correcting such many errors could be risky (especially with no other restrictions on received word). Usually after getting of higher degree, we decide not to correct the errors. Correction could fail in the case has roots with higher multiplicity or the number of roots is smaller than its degree. Fail could be detected as well by Forney formula returning error outside the transmitted alphabet.
Correct the errors
Using the error values and error location, correct the errors and form a corrected code vector by subtracting error values at error locations.
Decoding examples
Decoding of binary code without unreadable characters
Consider a BCH code in GF(24) with and . (This is used in QR codes.) Let the message to be transmitted be [1 1 0 1 1], or in polynomial notation,
The "checksum" symbols are calculated by dividing by and taking the remainder, resulting in or [ 1 0 0 0 0 1 0 1 0 0 ]. These are appended to the message, so the transmitted codeword is [ 1 1 0 1 1 1 0 0 0 0 1 0 1 0 0 ].
Now, imagine that there are two bit-errors in the transmission, so the received codeword is [ 1 0 0 1 1 1 0 0 0 1 1 0 1 0 0 ]. In polynomial notation:
In order to correct the errors, first calculate the syndromes. Taking we have and
Next, apply the Peterson procedure by row-reducing the following augmented matrix.
Due to the zero row, S3×3 is singular, which is no surprise since only two errors were introduced into the codeword.
However, the upper-left corner of the matrix is identical to [S2×2 | C2×1], which gives rise to the solution
The resulting error locator polynomial is which has zeros at and
The exponents of correspond to the error locations.
There is no need to calculate the error values in this example, as the only possible value is 1.
Decoding with unreadable characters
Suppose the same scenario, but the received word has two unreadable characters [ 1 0 0 ? 1 1 ? 0 0 1 1 0 1 0 0 ]. We replace the unreadable characters by zeros while creating the polynomial reflecting their positions We compute the syndromes and (Using log notation which is independent on GF(24) isomorphisms. For computation checking we can use the same representation for addition as was used in previous example. Hexadecimal description of the powers of are consecutively 1,2,4,8,3,6,C,B,5,A,7,E,F,D,9 with the addition based on bitwise xor.)
Let us make syndrome polynomial
compute
Run the extended Euclidean algorithm:
We have reached polynomial of degree at most 3, and as
we get
Therefore,
Let Don't worry that Find by brute force a root of The roots are and (after finding for example we can divide by corresponding monom and the root of resulting monom could be found easily).
Decoding with unreadable characters with a small number of errors
Let us show the algorithm behaviour for the case with small number of errors. Let the received word is [ 1 0 0 ? 1 1 ? 0 0 0 1 0 1 0 0 ].
Again, replace the unreadable characters by zeros while creating the polynomial reflecting their positions
Compute the syndromes and
Create syndrome polynomial
Let us run the extended Euclidean algorithm:
We have reached polynomial of degree at most 3, and as
we get
Therefore,
Let Don't worry that The root of is
Let
Let us look for error values using formula where are roots of polynomial
^Yasuo Sugiyama, Masao Kasahara, Shigeichi Hirasawa, and Toshihiko Namekawa. A method for solving key equation for decoding Goppa codes. Information and Control, 27:87–99, 1975.
References
Primary sources
Hocquenghem, A. (September 1959), "Codes correcteurs d'erreurs", Chiffres (in French), 2, Paris: 147–156