Rail vehicle resistance: Difference between revisions

Content deleted Content added

Inline

Revision as of 13:03, 9 July 2024

This sandbox is in the article namespace. Either move this page into your userspace, or remove the {{User sandbox}} template.

Definition

The total force necessary to maintain a rail vehicle in motion is the rail vehicle resistance (or simply resistance). This force depends on a number of variables and is of crucial importance for the energy efficiency of the vehicle as it is proportional to the tractive effort ^[1]. For the speed of the vehicle to remian the same, the locomotive must express the proper tractive force, otherwise the speed of the vehicle will change until this condition is met ^[2].

Davis equation

A number of experimental measurements ^[3] ^[4] ^[5] of the train resistance have shown that this force can be expressed as a quadratic equation with respect to speed as shown below:

$R=A+BV+CV^{2}$

Where $R$ is the resistance, $V$ is the speed of the rail vehicle and $A$ , $B$ , and $C$ are experimentally determined coefficients. The most well-known of these relations was proposed by Davis^[3] and is named after him.

Speed-independent term

The first term of the equation accounts for the contributions to the resistance that are independent from speed. Track gradient and acceleration contribute to this term, since they cause the work produced by the locoomtive to be converted to potential and kinetic energy respectively. Other contributions are bearing friction and rolling friction due to the the local deformation of the rail at the point of contact with the wheels, these latter quantities are independent from vehicle speed but they are be affected by number of axles and axle loads ^[6]. If the tracks curve, an additional component of this term needs to be added to account for the excess friction of the wheels pressed against the rails as a result of centrifugal force (CITAZIONE SCHITO).

Speed-linear term

The second term of Davis' equation relates to the terms linearly dependent on speed and is sometimes omitted becuase it is negligible compared to the other terms^[7]. This term is as easy to account with a direct physical explanation, but typically it is though of as a mass-related viscous term^[8]

Speed-quadratic term

Aerodynamic forces.

Measurement of tractive force

External links

References

^ "Power - physics". Encyclopedia Britannica. Retrieved July 8, 2024.
^ "Newton's laws of motion". Encyclopedia Britannica. Retrieved July 8, 2024.
^ ^a ^b Davis, W. J. (1926). "The Tractive Resistance of Electric Locomotives and Cars,". General Electric Review. p. 3.
^ Schmidt, E. C. (1910). ""Freight Train Resistance; Its Relation to Average Car Weight". University of Illinois Engineering Experiment Station.
^ Tuthil, J. K. (1938). "High-Speed Freight Train Resistance: Its Relation to Average Car Weight". University of Illinois Engineering Bulletin: 376.
^ Lukaszewicz, P (2007-03-01). "Running resistance - results and analysis of full-scale tests with passenger and freight trains in Sweden". Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 221 (2): 183–193. doi:10.1243/0954409JRRT89. ISSN 0954-4097.
^ Gielow, M. A.; Furlong, G. F. "Results of wind tunnel and full scale tests conducted from 1983 to 1987 in support of the Association of American Railroad's Energy program". Retrieved July 9, 2024.
^ Rochard, B. P.; Schmid, F. (2000). "A review of methods to measure and calculate train resistances". Proceedings of the Institution of Mechanical Engineers: 187.

@@ Line 15: / Line 15: @@
 ===Speed-independent term ===
-The first term of the equation accounts for the contributions to the resistance that are independent from speed. Track slope and acceleration contribute to this term, since the work produced by the locoomtive is respectively converted into potential and kinetic energy of the vehicle.
+The first term of the equation accounts for the contributions to the resistance that are independent from speed. Track gradient and acceleration contribute to this term, since they cause the work produced by the locoomtive to be converted to potential and kinetic energy  respectively. Other contributions are bearing friction and rolling friction due to the the local deformation of the rail at the point of contact with the wheels, these latter quantities are independent from vehicle speed but they are be affected by number of axles and axle loads <ref>{{Cite journal |last=Lukaszewicz |first=P |date=2007-03-01 |title=Running resistance - results and analysis of full-scale tests with passenger and freight trains in Sweden |url=http://journals.sagepub.com/doi/10.1243/0954409JRRT89 |journal=Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit |language=en |volume=221 |issue=2 |pages=183–193 |doi=10.1243/0954409JRRT89 |issn=0954-4097}}</ref>.
+If the tracks curve, an additional component of this term needs to be added to account for the excess friction of the wheels pressed against the rails as a result of centrifugal force (CITAZIONE SCHITO).
-Other contributions are bearing friction and rolling friction due to the the local deformation of the rail at the point of contact with the wheels, these quantities are independent from vehicle speed but they are be affected by number of axles and axle loads <ref>{{Cite journal |last=Lukaszewicz |first=P |date=2007-03-01 |title=Running resistance - results and analysis of full-scale tests with passenger and freight trains in Sweden |url=http://journals.sagepub.com/doi/10.1243/0954409JRRT89 |journal=Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit |language=en |volume=221 |issue=2 |pages=183–193 |doi=10.1243/0954409JRRT89 |issn=0954-4097}}</ref>.
-If the track curves, an additional component of this term needs to be accounted for.
 ===Speed-linear term ===
 The second term of Davis' equation relates to the terms linearly dependent on speed and is sometimes omitted becuase it is negligible compared to the other terms<ref>{{cite web |last1=Gielow |first1=M. A. |last2=Furlong |first2=G. F. |title=Results of wind tunnel and full scale tests conducted from 1983 to 1987 in support of the Association of American Railroad's Energy program |url=https://trid.trb.org/View/293260 |access-date=July 9, 2024}}</ref>.