Image persistence: Difference between revisions
Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.5) (Awkwafaba - 20702 |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Image:dell-1905fp-image-persistence.jpg|thumb|right|270px|Detail of a TFT display showing whole screen persistence artifacts]] |
[[Image:dell-1905fp-image-persistence.jpg|thumb|right|270px|Detail of a TFT display showing whole screen persistence artifacts]] |
||
[[File:Image persistance GW2765HT.jpg|thumb|Image persistence on a BenQ GW2765HT IPS LCD monitor]] |
[[File:Image persistance GW2765HT.jpg|thumb|Image persistence on a BenQ GW2765HT IPS LCD monitor]] |
||
'''Image persistence''', or '''image retention''', is |
'''Image persistence''', or '''image retention''', is a phenomennon in [[LCD]] and [[plasma display]]s where visual information stays on the display after it is meant to be displayed. It is the flat-panel equivalent of [[screen burn-in]]. Unlike screen burn, the effects are usually temporary and often not visible without close inspection. Plasma displays experiencing severe image persistence can result in screen burn-in instead. |
||
Image persistence can occur as easily as having something remain unchanged on the screen in the same location for a duration of even 10 minutes, such as a web page or document. Minor cases of image persistence are generally only visible when looking at darker areas on the screen, and usually invisible to the eye during ordinary computer use. |
Image persistence can occur as easily as having something remain unchanged on the screen in the same location for a duration of even 10 minutes, such as a web page or document. Minor cases of image persistence are generally only visible when looking at darker areas on the screen, and usually invisible to the eye during ordinary computer use. |
||
Revision as of 04:30, 30 September 2024
Image persistence, or image retention, is a phenomennon in LCD and plasma displays where visual information stays on the display after it is meant to be displayed. It is the flat-panel equivalent of screen burn-in. Unlike screen burn, the effects are usually temporary and often not visible without close inspection. Plasma displays experiencing severe image persistence can result in screen burn-in instead.
Image persistence can occur as easily as having something remain unchanged on the screen in the same location for a duration of even 10 minutes, such as a web page or document. Minor cases of image persistence are generally only visible when looking at darker areas on the screen, and usually invisible to the eye during ordinary computer use.
Cause
Liquid crystals have a natural relaxed state. When a voltage is applied they rearrange themselves to block certain light waves. If left with the same voltage for an extended period of time (e.g. displaying a pointer or the Taskbar in one place, or showing a static picture for extended periods of time), the liquid crystals can develop a tendency to stay in one position. This ever-so-slight tendency to stay arranged in one position can throw the requested color off by a slight degree, which causes the image to look like the traditional "burn-in" on phosphor based displays. In fact, the root cause of LCD image retention is different from phosphor aging, but the phenomenon is the same, namely uneven use of display pixels. Slight LCD image retention can be recovered. When severe image retention occurs, the liquid crystal molecules have been polarized and cannot rotate in the electric field, so they cannot be recovered.
The cause of this tendency is unclear. It might be due to various factors, including accumulation of ionic impurities inside the LCD, impurities introduced during the fabrication of the LCD, imperfect driver settings, electric charge building up near the electrodes,[1][2] parasitic capacitance,[3] or a DC voltage component that occurs unavoidably in some display pixels owing to anisotropy in the dielectric constant of the liquid crystal.[4]
Prevention and treatment
Image persistence can be reversed by allowing the liquid crystals to relax and return to their relaxed state, such as by turning off the monitor for a sufficiently long period of time (at least a few hours). For most minor cases, simply continuing to use the computer as usual (and thus allowing other colors to "cover" the affected regions) or turning off the monitor for the night is more than enough. One strategy for users looking to avoid image persistence artifacts is to vary the activities performed on a computer to avoid static colors and hide elements on the screen which are displayed perpetually (such as an OS's Taskbar). Another strategy is the usage of a screensaver to help during times the computer is left unattended. Covering the entire display area with pure white for an extended period of time is also a useful proactive solution.[5][6]
References
- ^ Image persistence: LCD monitors Archived 2008-12-27 at the Wayback Machine. Mitsubishi Electric, January 2006 (?)
- ^ WHITEPAPER LCD technology and image retention Archived 2016-05-23 at the Portuguese Web Archive. Koninklijke Philips Electronics N.V. ©2009
- ^ Pixels and Image Sticking. Tyco Electronics technical support (pre-2008)
- ^ K. Kusafuka, H. Shimizu and S. Kimura, Driving method for gate-delay compensation of TFT/LCD. IBM Journal of Research and Development, Volume 42, Numbers 3/4, 1998
- ^ "Avoiding image persistence on Apple LCD displays". Apple. Retrieved 18 Oct 2013.
- ^ "Archived copy" (PDF). Archived from the original (PDF) on 2020-09-21. Retrieved 2018-10-05.
{{cite web}}: CS1 maint: archived copy as title (link)
External links
- Article on LCD image persistence Archived 2005-12-11 at the Wayback Machine
- TFT LCD Burn-in