Standard atmosphere (unit): Difference between revisions
Content deleted Content added
→History: the centigrade scale (not "Celsius" at its inception) defined 100 °C; it didn't define 212 °F so it's inappropriate to display that, whether with {{Convert}} or otherwise |
→Pressure units and equivalencies: deduplicate: rmv items already in table from following "can also be stated as:" list |
||
| Line 32: | Line 32: | ||
A pressure of 1 atm can also be stated as: |
A pressure of 1 atm can also be stated as: |
||
:≡ {{val|101325}} [[Pascal (unit)|pascals]] (Pa) |
|||
:≡ {{val|1.01325}} [[bar (unit)|bar]] |
|||
:≈ {{val|1.033}} [[Kilogram-force|kgf]]/cm<sup>2</sup> |
:≈ {{val|1.033}} [[Kilogram-force|kgf]]/cm<sup>2</sup> |
||
| ⚫ | :≈ {{val|10.33}} [[Centimetre of water|m H<sub>2</sub>O]]<ref name="H2O">As a unit of measurement, the conventional metre of water (mH<sub>2</sub>O) is defined as an ideal column of water with density of 1000 kg/m<sup>3</sup> under standard gravity g<sub>n</sub> of 9.80665 m/s<sup>2</sup> i.e. 1 m × 1000 kg/m<sup>3</sup> × 9.80665 m/s<sup>2</sup> = 9806.65 Pa (though in practice the density of pure water is always less). 1 cmH<sub>2</sub>O = 0.01 mH<sub>2</sub>O and 1 inH<sub>2</sub>O = 0.0254 mH<sub>2</sub>O. {{Cite book |title=BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors |publisher=British Standards Institution |year=1974 |pages=49}}</ref> |
||
:≈ {{val|1.033}} [[technical atmosphere]] |
|||
:≈ {{val| |
:≈ {{val|760}} [[millimetre of mercury|mmHg]]<ref name="Hg">As a unit of measurement, the conventional millimetre of mercury (mmHg) is defined as an ideal column of mercury with density of {{val|13595.1}} kg/m<sup>3</sup> under standard gravity g<sub>n</sub> of 9.80665 m/s<sup>2</sup> i.e. 0.01 m × {{val|13595.1}} kg/m<sup>3</sup> × 9.80665 m/s<sup>2</sup> ≈ 133.322 Pa. 1 inHg = 25.4 mmHg. {{Cite book |title=BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors |publisher=British Standards Institution |year=1974 |pages=49}}</ref> |
||
| ⚫ | :≈ {{val| |
||
:≡ {{val|760}} [[torr]] (Torr)<ref group="n">Torr and mm-Hg are often taken to be identical. For most practical purposes (to 5 significant digits), they are interchangeable.</ref> |
:≡ {{val|760}} [[torr]] (Torr)<ref group="n">Torr and mm-Hg are often taken to be identical. For most practical purposes (to 5 significant digits), they are interchangeable.</ref> |
||
: |
|||
:≈ {{val|29.92}} [[inch of mercury|inHg]]<ref name=Hg /> |
:≈ {{val|29.92}} [[inch of mercury|inHg]]<ref name="Hg" /> |
||
:≈ {{val|406.782}} [[inch of water|in H<sub>2</sub>O]]<ref name=H2O /> |
:≈ {{val|406.782}} [[inch of water|in H<sub>2</sub>O]]<ref name="H2O" /> |
||
:≈ {{val|14.6959}} [[pounds per square inch|pounds-force per square inch]] (lbf/in<sup>2</sup>) |
|||
:≈ {{val|2116.22}} [[pounds per square foot|pounds-force per square foot]] (lbf/ft<sup>2</sup>) |
:≈ {{val|2116.22}} [[pounds per square foot|pounds-force per square foot]] (lbf/ft<sup>2</sup>) |
||
:= 1 ata (atmosphere absolute). |
:= 1 ata (atmosphere absolute). |
||
The '''ata''' unit is used in place of atm to indicate the total pressure of the system, compared to a vacuum.<ref>{{cite web |website=Scuba Diving & Other Fun Activities |url=http://scubadoobydoo.blogspot.com.br/2008/03/difference-between-atm-ata.html |title=The Difference Between An ATM & An ATA |date=March 2, 2008}}</ref> For example, an underwater pressure of 3 '''ata''' would mean that this pressure includes 1 atm of air pressure and thus 2 atm due to the water.{{cn|date=May 2023}} |
The '''ata''' unit is used in place of atm to indicate the total pressure of the system, compared to a vacuum.<ref>{{cite web |website=Scuba Diving & Other Fun Activities |url=http://scubadoobydoo.blogspot.com.br/2008/03/difference-between-atm-ata.html |title=The Difference Between An ATM & An ATA |date=March 2, 2008}}</ref> For example, an underwater pressure of 3 '''ata''' would mean that this pressure includes 1 atm of air pressure and thus 2 atm due to the water.{{cn|date=May 2023}} |
||
Revision as of 18:00, 9 October 2024
| Atmosphere | |
|---|---|
| Unit of | Pressure |
| Symbol | atm |
| Conversions | |
| 1 atm in ... | ... is equal to ... |
| SI units | 101.325 kPa |
| US customary units | 14.69595 psi |
| other metric units | 1.013250 bar |
The standard atmosphere (symbol: atm) is a unit of pressure defined as 101325 Pa. It is sometimes used as a reference pressure or standard pressure. It is approximately equal to Earth's average atmospheric pressure at sea level.[1]
History
The standard atmosphere was originally defined as the pressure exerted by a 760 mm column of mercury at 0 °C (32 °F) and standard gravity (gn = 9.80665 m/s2).[2] It was used as a reference condition for physical and chemical properties, and was implicit in the definition of the centigrade temperature scale, which defined 100 °C as the boiling point of water at this pressure. In 1954, the 10th General Conference on Weights and Measures (CGPM) adopted standard atmosphere for general use and affirmed its definition of being precisely equal to 1013250 dynes per square centimetre (101325 Pa).[3] This defined pressure in a way that is independent of the properties of any particular substance. In addition, the CGPM noted that there had been some misapprehension that the previous definition (from the 9th CGPM) "led some physicists to believe that this definition of the standard atmosphere was valid only for accurate work in thermometry."[3]
In chemistry and in various industries, the reference pressure referred to in standard temperature and pressure was commonly 1 atm (101.325 kPa) prior to 1982, but standards have since diverged; in 1982, the International Union of Pure and Applied Chemistry recommended that for the purposes of specifying the physical properties of substances, standard pressure should be precisely 100 kPa (1 bar).[4]
Pressure units and equivalencies
| Pascal | Bar | Technical atmosphere | Standard atmosphere | Torr | Pound per square inch | |
|---|---|---|---|---|---|---|
| (Pa) | (bar) | (at) | (atm) | (Torr) | (lbf/in2) | |
| 1 Pa | — | 1 Pa = 10−5 bar | 1 Pa = 1.0197×10−5 at | 1 Pa = 9.8692×10−6 atm | 1 Pa = 7.5006×10−3 Torr | 1 Pa = 0.000145037737730 lbf/in2 |
| 1 bar | 105 | — | = 1.0197 | = 0.98692 | = 750.06 | = 14.503773773022 |
| 1 at | 98066.5 | 0.980665 | — | 0.9678411053541 | 735.5592401 | 14.2233433071203 |
| 1 atm | ≡ 101325 | ≡ 1.01325 | 1.0332 | — | 760 | 14.6959487755142 |
| 1 Torr | 133.322368421 | 0.001333224 | 0.00135951 | 1/760 ≈ 0.001315789 | — | 0.019336775 |
| 1 lbf/in2 | 6894.757293168 | 0.068947573 | 0.070306958 | 0.068045964 | 51.714932572 | — |
A pressure of 1 atm can also be stated as:
- ≈ 1.033 kgf/cm2
- ≈ 10.33 m H2O[5]
- ≈ 760 mmHg[6]
- ≡ 760 torr (Torr)[n 1]
- ≈ 29.92 inHg[6]
- ≈ 406.782 in H2O[5]
- ≈ 2116.22 pounds-force per square foot (lbf/ft2)
- = 1 ata (atmosphere absolute).
The ata unit is used in place of atm to indicate the total pressure of the system, compared to a vacuum.[7] For example, an underwater pressure of 3 ata would mean that this pressure includes 1 atm of air pressure and thus 2 atm due to the water.[citation needed]
Notes
- ^ Torr and mm-Hg are often taken to be identical. For most practical purposes (to 5 significant digits), they are interchangeable.
See also
References
- ^ "Water Pressures at Ocean Depths". NOAA Pacific Marine Environmental Laboratory. Retrieved 11 October 2022.
- ^ Resnick, Robert; Halliday, David (1960). Physics for Students of Science and Engineering Part 1. New York: Wiley. p. 364.
- ^ a b "BIPM - Resolution 4 of the 10th CGPM". www.bipm.org.
- ^ IUPAC.org, Gold Book, Standard Pressure
- ^ a b As a unit of measurement, the conventional metre of water (mH2O) is defined as an ideal column of water with density of 1000 kg/m3 under standard gravity gn of 9.80665 m/s2 i.e. 1 m × 1000 kg/m3 × 9.80665 m/s2 = 9806.65 Pa (though in practice the density of pure water is always less). 1 cmH2O = 0.01 mH2O and 1 inH2O = 0.0254 mH2O. BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 49.
- ^ a b As a unit of measurement, the conventional millimetre of mercury (mmHg) is defined as an ideal column of mercury with density of 13595.1 kg/m3 under standard gravity gn of 9.80665 m/s2 i.e. 0.01 m × 13595.1 kg/m3 × 9.80665 m/s2 ≈ 133.322 Pa. 1 inHg = 25.4 mmHg. BS 350:Part 1:1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 49.
- ^ "The Difference Between An ATM & An ATA". Scuba Diving & Other Fun Activities. March 2, 2008.