Jump to content

Tunnel: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Examples of tunnels: Seikan Tunnel
Line 26: Line 26:
Shallow tunnels are of the cut-and-cover type (if under water of the immersed-tube type), deep tunnels are excavated, often using a [[tunnelling shield]]. For intermediate levels, both methods are possible.
Shallow tunnels are of the cut-and-cover type (if under water of the immersed-tube type), deep tunnels are excavated, often using a [[tunnelling shield]]. For intermediate levels, both methods are possible.


There are a variety of Tunnel Boring Machines (TBMs) that can operate in a variety of conditions. One type of TBM called an earth-pressure balence machine can be used deep below the water table. This type of TBM pressurizes the cutter head with either fluid or air in order to balence the water pressure. As a result operaters of the TBM must go thru decompression chambers, much like divers.
[[Tunnel boring machine]]s can be used to automate the entire tunneling process.
[[Tunnel boring machine]]s can be used to automate the entire tunneling process.



Revision as of 00:20, 20 April 2005

Disused railway tunnel now converted to pedestrian and bicycle use, near Houyet, Belgium

A tunnel is an underground passage. When designed for use by traffic, it may be called an underpass.

It may be for pedestrians and/or cyclists, for general road traffic, for motor vehicles only, for rail traffic, or for a canal. Some tunnels are constructed purely for carrying water (for consumption, for hydroelectric purposes or as sewers), while others carry other services such as telecommunications cables. There are even tunnels designed as wildlife crossings for European badgers and other endangered species.

Tunnels are dug in various types of materials, from soft clays to hard rocks. Depending on the type of soil, a method of excavation is chosen. When digging soft clays, the New Austrian Tunnelling method or NATM is used. When digging in weak rocks a tunnel boring machine or TBM is used. In hard rocks blasting is usually the fastest method, as in the Norwegian tunnelling method.

Various combinations of these methods are also possible. The central part of a metro network is usually built in tunnels. To allow non-level crossings, some lines are in deeper tunnels than others. At metro stations there are often also pedestrian tunnels to walk from one platform to another.

Ground-level railway stations often have one or more pedestrian tunnels under the railway to enable passengers to reach the platforms without having to walk across the tracks.

In the UK a pedestrian tunnel or other underpass beneath a road is called a "subway". This term was also used in the past in the US, but is now used to refer to underground mass transit systems (which are generally called metros outside the US).

One of three caves within the 24.5 km long Lærdal Tunnel, Norway

The Lærdal Tunnel in Norway stretching from Lærdal to Aurland is the world's longest road tunnel at 24.5 km, with the St. Gotthard Tunnel that opened in Switzerland on September 5, 1980 as the world's longest highway tunnel at 16.32 km (10.14 miles) stretching from Göschenen to Airolo. By contrast, rail tunnels like the Seikan Tunnel in Japan and the Channel tunnel between England and France both exceed 50 km (30 miles). A new St. Gotthard Rail Tunnel with a length of 57 km (36 mi) is currently under construction.

Types of tunnels

  • Soft ground
  • Hard rock
  • Underwater

Construction

A tunnel boring machine that was used at Yucca Mountain, Nevada

Cut-and-cover is a simple method of construction for shallow tunnels where a trench is excavated and roofed over. Strong supporting beams are necessary to avoid the danger of the tunnel collapsing.

Shallow tunnels are of the cut-and-cover type (if under water of the immersed-tube type), deep tunnels are excavated, often using a tunnelling shield. For intermediate levels, both methods are possible.

There are a variety of Tunnel Boring Machines (TBMs) that can operate in a variety of conditions. One type of TBM called an earth-pressure balence machine can be used deep below the water table. This type of TBM pressurizes the cutter head with either fluid or air in order to balence the water pressure. As a result operaters of the TBM must go thru decompression chambers, much like divers. Tunnel boring machines can be used to automate the entire tunneling process.

Choice of tunnels vs. bridges

For water crossings, a tunnel is generally more costly to construct than a bridge. However, navigational considerations may limit the use of high bridges or drawbridge spans when intersecting with shipping channels at some locations, necessitating use of a tunnel. Examples of such tunnels include the Holland Tunnel and Lincoln Tunnel between New Jersey and Manhattan Island in New York City, and the Elizabeth River tunnels between Norfolk and Portsmouth, Virginia.

Examples of tunnels

Interior of the Thames Tunnel, London, mid-19th century

See also