Jump to content

Mark 48 torpedo: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
Use of Mk 48 by Dutch Navy added
Line 4: Line 4:
The '''Mark 48 [[torpedo]]''' and its improved ADCAP ('''Ad'''vanced '''Cap'''ability) variant are designed to sink fast, deep-diving [[nuclear propulsion|nuclear-powered]] [[submarine]]s and high-performance surface ships.
The '''Mark 48 [[torpedo]]''' and its improved ADCAP ('''Ad'''vanced '''Cap'''ability) variant are designed to sink fast, deep-diving [[nuclear propulsion|nuclear-powered]] [[submarine]]s and high-performance surface ships.


The Mk-48 torpedo is designed to be launched from submarine torpedo tubes. It is carried by all [[United States Navy|U.S. Navy]] submarines, including [[Ohio class submarine|''Ohio''-class ballistic missile submarines]] and [[Seawolf class submarine|''Seawolf'']], [[Los Angeles class submarine|''Los Angeles'']] and [[Virginia class submarine|''Virginia'']] [[attack submarine]]s. It is also used on [[Canada|Canadian]] and [[Australia]]n submarines.
The Mk-48 torpedo is designed to be launched from submarine torpedo tubes. It is carried by all [[United States Navy|U.S. Navy]] submarines, including [[Ohio class submarine|''Ohio''-class ballistic missile submarines]] and [[Seawolf class submarine|''Seawolf'']], [[Los Angeles class submarine|''Los Angeles'']] and [[Virginia class submarine|''Virginia'']] [[attack submarine]]s. It is also used on [[Canada|Canadian]], [[Australia]]n and [[Netherlands|Dutch]] submarines.


Operational since 1972, the Mk-48 replaced the [[Mark 37 torpedo|Mk-37]] and [[Mark 14 Torpedo|Mk-14]] torpedoes. The Mk-48 ADCAP became operational in [[1988]] and was approved for full production in [[1989]].
Operational since 1972, the Mk-48 replaced the [[Mark 37 torpedo|Mk-37]] and [[Mark 14 Torpedo|Mk-14]] torpedoes. The Mk-48 ADCAP became operational in [[1988]] and was approved for full production in [[1989]].

Revision as of 07:42, 15 May 2007

File:Mark 48 Torpedo testing.jpg
Testing of the Mark 48: The Australian Collins-class submarine, HMAS Farncomb, fired a Mark 48 torpedo at the 28-year-old destroyer escort Torrens. The torpedo detonated under the hull, as designed, and broke the destroyer in two. The stern half sank immediately, the bow half sometime later.
For the 7.62 mm NATO machine gun, see Mk 48 Mod 0.

The Mark 48 torpedo and its improved ADCAP (Advanced Capability) variant are designed to sink fast, deep-diving nuclear-powered submarines and high-performance surface ships.

The Mk-48 torpedo is designed to be launched from submarine torpedo tubes. It is carried by all U.S. Navy submarines, including Ohio-class ballistic missile submarines and Seawolf, Los Angeles and Virginia attack submarines. It is also used on Canadian, Australian and Dutch submarines.

Operational since 1972, the Mk-48 replaced the Mk-37 and Mk-14 torpedoes. The Mk-48 ADCAP became operational in 1988 and was approved for full production in 1989.

Mk-48 and Mk-48 ADCAP torpedoes can be guided from a submarine by wires attached to the torpedo. They can also use their own active or passive sensors to execute programmed target searches, acquisition and attack procedures. The torpedoes are designed to detonate under the keel of a surface ship, breaking the ship's back and destroying its structural integrity. Both can circle back and try again if they miss.

General characteristics (Mk-48 and Mk-48 ADCAP)

  • Primary Function: Heavyweight torpedo for submarines
  • Contractor:
  • Power Plant: Swash-plate piston engine; pump jet
  • Length: 19 ft (5.79 m)
  • Weight: 3,434 lb (1,558 kg) (Mk-48); 3,695 lb (1,676 kg) (Mk-48 ADCAP)
  • Diameter: 21 in (533 mm)
  • Range: Greater than 5 mi (8 km)
  • Depth: Greater than 1,200 ft (370 m)
  • Speed: Greater than 28 kt (32 mph, 52 km/h)
  • Guidance System: Wire guided and passive/active acoustic homing
  • Warhead: 650 lb (295 kg) high explosive (at short range, the torpedo's unused fuel adds to the destructive power of the warhead)
  • Date Deployed: 1972 (Mk-48), 1988 (Mk-48 ADCAP)

The official performance data may be a gross understatement, according to non-military sources that put the depth at deeper than 600 meters, the top speed between 60 to 75 knots (110 to 140 km/h), the range at top speed at more than 20 nautical miles (37 km), and the range at lower speeds at more than 30 nautical miles (56 km).

Propulsion

The swash-plate piston engine is fueled by Otto fuel II, a monopropellant that decomposes into hot gas when ignited, which drives the engine. The thrust is generated by a propulsor assembly.

Sensors and improvements

The torpedo's seeker has an active electronically-steered "pinger" which helps avoid having to maneuver as it closes with the target. Unconfirmed reports indicate that the torpedoes' sensors can monitor surrounding electrical and magnetic fields. This may refer to the electromagnetic coils on the warhead (at least from 1977 to 1981), used to sense the metallic mass of the ship's hull and detonate at the proper stand-off distance.

According to various sources, continued improvement has been in progress. In the 1990s, a Mod6 variant of the ADCAP has provided much improved noise isolation of the engine, which makes this torpedo more difficult to be detected by any potential target(s). In the early 2000s, upgrade design works (codename CBASS Common Broadband Advanced Sonar System) was started to improve shallow water target detection capability and counter-countermeasure capability.

References