Volume rendering

A volume rendered cadaver head using view-aligned texture mapping and diffuse reflection

Volume rendering is a technique used to display a 2D projection of a 3D discretely sampled data set.

A typical 3D data set is a group of 2D slice images acquired by a CT or MRI scanner. Usually these are acquired in a regular pattern (e.g., one slice every millimeter) and usually have a regular number of image pixels in a regular pattern. This is an example of a regular volumetric grid, with each volume element, or voxel represented by a single value that is obtained by sampling the immediate area surrounding the voxel.

To render a 2D projection of the 3D data set, one first needs to define a camera in space relative to the volume. Also, one needs to define the opacity and color of every voxel. This is usually defined using an RGBA (for red, green, blue, alpha) transfer function that defines the RGBA value for every possible voxel value.

Volume rendered CT scan of a forearm with different colour schemes for muscle, fat, bone, and blood.

A volume may be viewed by extracting surfaces of equal values from the volume and rendering them as polygonal meshes or by rendering the volume directly as a block of data. The Marching Cubes algorithm is a common technique for extracting a surface from volume data. Direct volume rendering is a computationally intensive task that may be performed in several ways.

Direct Volume Rendering

A direct volume renderer requires every sample value to be mapped to opacity and a color. This is done with a “transfer function” which can be a simple ramp, a piecewise linear function or an arbitrary table. Once converted to an RGBA (for red, green, blue, alpha) value, the composed RGBA result is projected on correspondent pixel of the frame buffer. The way this is done depends on the rendering technique.

A combination of these techniques is possible. For instance, a shear warp implementation could use texturing hardware to draw the aligned slices in the off-screen buffer.

Volume Ray Casting

Main article: Volume ray casting.

The simplest way to project the image is to cast rays through the volume using ray casting. In this technique, a ray is generated for each desired image pixel. Using a simple camera model, the ray starts at the center of the projection of the camera (usually the eye point) and passes through the image pixel on the imaginary image plane floating in between the camera and the volume to be rendered. The ray is clipped by the boundaries of the volume in order to save time. Then the ray is sampled at regular intervals throughout the volume. The data is interpolated at each sample point, the transfer function applied to form an RGBA sample, the sample is composited onto the accumulated RGBA of the ray, and the process repeated until the ray exits the volume. The RGBA color is converted to an RGB color and deposited in the corresponding image pixel. The process is repeated for every pixel on the screen to form the completed image. Examples of high quality ray casting volume rendering can be seen on [1].

Splatting

This is a technique which trades quality for speed. Here, every volume element is splatted (like snow balls) on to the viewing surface in back to front order. These splats are rendered as disks whose properties (color and transparency) vary diametrically in normal (Gaussian) manner. Flat disks and those with other kinds of property distribution are also used depending on the application.

Shear Warp

Example of a mouse skull (CT) rendering using the shear warp algorithm

A new approach to volume rendering was developed by Cameron and Undrill, popularized by Philippe Lacroute and Marc Levoy, and described in the paper "Fast Volume Rendering Using a Shear-Warp Factorization of the Viewing Transformation" [2] In this technique, the viewing transformation is transformed such that the nearest face of the volume becomes axis aligned with an off-screen image buffer with a fixed scale of voxels to pixels. The volume is then renderered into this buffer using the far more favourable memory alignment and fixed scaling and blending factors. Once all slices of the volume have been rendered, the buffer is then warped into the desired orientation and scale in the displayed image.

This technique is relatively fast in software at the cost of less accurate sampling and potentially worse image quality compared to ray casting. Expected overhead is storing multiple copies of the volume for the ability to have near axis aligned volumes. And that is mitigated by the run length encoding used.

Texture Mapping

Many 3D graphics systems use texture mapping to apply images, or textures, to geometric objects. Commodity PC graphics cards are fast at texturing and can efficiently render slices of a 3D volume, with realtime interaction capabilities. Workstation GPU's are even faster, and are the basis for much of the production volume visualization used in medical imaging, oil and gas, and other markets (2007). In earlier years, dedicated 3D texture mapping systems were used on workstation systems such as Silicon Graphics Infinite Reality, HP Visualize FX, and others.

These slices can either be aligned with the volume and rendered at an angle to the viewer, or aligned with the viewing plane and sampled from unaligned slices through the volume. Graphics hardware support for 3D textures is needed for the second technique.

Volume aligned texturing produces images of reasonable quality, though there is often a noticeable transition when the volume is rotated. View aligned texturing creates images of similar high quality to those of ray casting, and indeed the sampling pattern is identical.

Hardware-Accelerated Volume Rendering

A recently exploited technique to accelerate rendering is the use of modern graphics cards to accelerate traditional volume rendering algorithms such as ray-casting. Starting with the programmable pixel shaders, people recognized the power of parallel operations on multiple pixels and began to perform general purpose computations on the graphics chip. The pixel shaders are able to read and write randomly from video memory and perform some basic mathematical and logical calculations. These SIMD processors were used to perform general calculations such as rendering polygons and signal processing. In recent GPU generations, the pixel shaders now are able to function as MIMD processors (now able to independently branch) utilizing up to 1GB of texture memory with floating point formats. With such power, virtually any algorithm with steps that can be performed in parallel, such as volume ray casting or CT reconstruction, can be performed with tremendous acceleration. The introduction of languages like GLSL, it is possible for volume renderers such as Drishti to use their own algorithms optimised for the task at hand. Custom shaders can be written for variations of the volume rendering process, such as multiple volume shaders, shadow and lighting, emissive colour and so forth.

Optimization Techniques

Empty Space Skipping

Often, a volume rendering system will have a system for identifying regions of the volume containing no visible material. This information can be used to avoid rendering these transparent regions^[3].

Early Ray Termination

This is a technique used when the volume is rendered in front to back order. For a ray through a pixel, once sufficient dense material has been encountered, further samples will make no significant contribution to the pixel and so may be ignored.

Octree and BSP space subdivision

The use of hierarchical structures such as octree and BSP-tree could be very helpful for both compression of volume data and speed optimization of volumetric ray casting process.

Volume Segmentation

By sectioning out large portions of the volume that one considers uninteresting before rendering, the amount of calculations that have to be made by ray casting or texture blending can be significantly reduced. This reduction can be as much as from O(n) to O(log n) for n sequentially indexed voxels. Volume segmentation also has significant performance benefits for other ray tracing algorithms.

Multiple and Adaptive Resolution Representation

By representing less interesting regions of the volume in a coarser resolution, the data input overhead can be reduced. On closer observation, the data in these regions can be populated either by reading from memory or disk, or by interpolation.

Pre-integrated volume rendering

Pre-integrated volume rendering^[4][5] is a method that can reduce sampling artifacts by pre-computing much of the required data. It is especially useful in hardware-accelerated applications^[6][7] because it improves quality without a large performance impact.

Sources

• R. A. Drebin, L. Carpenter, P. Hanrahan: Volume Rendering. 1988
• Barthold Lichtenbelt, Randy Crane, Shaz Naqvi, Introduction to Volume Rendering (Hewlett-Packard Professional Books) , Hewlett-Packard Company 1998.
• ^ Engel K., Kraus M., Ertl T.: High-quality pre-integrated volume rendering using hardware-accelerated pixel shading. In Proceedings of Eurographics/SIGGRAPH Workshop on Graphics Hardware (2001), pp. 9–16.
• ^ Lum E., Wilson B., Ma K.: High-Quality Lighting and Efficient Pre-Integration for Volume Rendering. In Eurographics/IEEE Symposium on Visualization 2004.
• ^ Max N., Hanrahan P., Crawfis R.: Area and volume coherence for efficient visualization of 3D scalar functions. In Computer Graphics (San Diego Workshop on Volume Visualization) (1990) vol. 24, pp. 27–33.
• ^ Sherbondy A., Houston M., Napel S.: Fast volume segmentation with simultaneous visualization using programmable graphics hardware. In Proceedings of IEEE Visualization (2003), pp. 171–176.
• ^ Stein C., Backer B., Max N.: Sorting and hardware assisted rendering for volume visualization. In Symposium on Volume Visualization (1994), pp. 83–90.

External links

• Tutorial: Interactive Visualization of Volumetric Data on Consumer PC Hardware