Jump to content

User:Kbernstein/SLDMB: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
Line 9: Line 9:
</gallery>
</gallery>



{| class="SLDMB Specifications" border="1"
==Mechanical Design==
The SLDMB design is based upon the Davis-style drifting buoy, which minimizes the affects of wind and waves on the drifter allowing for a more accurate representation of the surface currents. <ref name="Davis">[Davis, R. E. (1985). Drifter Observations of Coastal Surface Currents During CODE: The Method and Descriptive View. Journal of Geophysical Research, 90(C3), 14.].</ref> The SLDMB is shown in Figure 1 with four orthogonal drag vanes that are constructed of nylon fabric and supported by PVC arms that extend from a cylindrical hull. <ref name="Bang">[Bang, I., Mooers, C. N. K., Haus, B., Turner, C., Lewandowski, M. (2007). Technical Report: Surface Drifter Advection and Dispersion in the Florida Current Between key West and Jacksonville, Florida. Technical Report.].</ref> Four floats attach to the PVC arms that maintain the buoyancy of the SLDMB. <ref name="Bang"/>

Prior to launch, the SLDMB is packaged in a circular cylinder, which can be launched through a hatch or door in any fixed or rotating wing aircraft or from any surface vessel moving up to 35 knots. The SLDMB is made up of a Deployment Assembly and a Surface Unit. The Deployment Assembly controls the aerial decent and breaks away along with the parachute when the buoy hits the water while the Surface Unit consists of an aluminum cylinder with the drogue panels attached. <ref name="METOCEAN"/> All of the electronics are switched on after the arms deploy. Figure 2 and 3 illustrate the SLDMB in a packaged state and then deployed.

The SLDMB parachute is square with two diagonal slits offset from the corners. The chute is 27 inches per side. The slits allow some airflow through the chute providing a flight time of 3 to 5 seconds. This design prevents the buoy from drifting off course and ensuring that it lands within 100 meters of the aircraft track. <ref name="METOCEAN"/>

{| class="SLDMB Specifications" border="2"
|-
|-
! Buoy Dimensions
! SLDMB Dimensions
!
|-
|-
| Buoy Prior to Deployment
|'''Buoy Prior to Deployment'''
|-
|-
|Packaged Length
|Packaged Length
Line 25: Line 32:
|11.3 Kg ( 25.0 pounds)
|11.3 Kg ( 25.0 pounds)
|-
|-
|Deployed Surface Unit
|'''Deployed Surface Unit'''
|-
|-
|Hull Diameter
|Hull Diameter
Line 33: Line 40:
|1400 mm (55.0 inches)
|1400 mm (55.0 inches)
|-
|-
|Total cross section width
|1090 mm 43 inches)
|-
|Drogue Vane
|500 mm (19.6 inches) X 650 mm (25.6 inches)
|-
|Length of Exposed Mast
|400 mm (16.0 inches)
|-
|Float size (each is • of the cylinder)
|133 mm (5.25 in) diameter X 216 mm ( 8.5 in) long
|-
|Weight In Air
|8.0 kg (17.5 pounds)
|}
|}




{| class="Buoy Construction" border="2"
Total cross section width||1090 mm 43 inches)
|-
|-
! Buoy Construction
Drogue Vane||500 mm (19.6 inches) X 650 mm (25.6 inches)
|-
|Hull
|Heavy gauge marine grade aluminum
|-
|Flotation
|Four quarter cylinder foam floats
|-
|-
|Antenna
Length of Exposed Mast||400 mm (16.0 inches)
|Top-loaded truncated monopole ARGOS antenna with active GPS element antenna above
|-
|-
|Drogue Panels
Float size (each is • of the cylinder)||133 mm (5.25 in) diameter X 216 mm ( 8.5 in) long
|Flexible, Nylon cloth
|}

==Electronic Design==

The SLDMB electronics package consist of the METOCEAN Model MAT 906 (Argos package), the Sensor Scientific Thermistor Model WM 103 that measures sea surface temperature, the Precision resistive divider for battery voltage, and the GPS receiver (Conexant Jupiter Model TU30-D140-231). <ref name="METOCEAN"/> All electronics are located at the bottom of the Surface Unit along with a power supply consisting of 10 “D” sized cells providing a minimum 15-day operating life. The antenna assembly is spring-loaded and raises the antenna to approximately 15.8 inches above the ocean surface. <ref name="METOCEAN"/> The ARGOS Data Transmission Format as well as the decoding equations are located in the METOCEAN User’s Manual.

{| class="Electronics" border="2"
|-
|-
! Electronics
Weight In Air||8.0 kg (17.5 pounds)
|-
|-
|ARGOS PTT
Buoy Construction
|METOCEAN Model MAT 906
|-
Hull||Heavy gauge marine grade aluminum
|-
|-
|GPS Receiver
Flotation||Four quarter cylinder foam floats
|NAVMAN Jupiter 21 Model TU21-D450-031
|-
|}
Antenna||Top-loaded truncated monopole ARGOS antenna with active GPS element antenna above

|-

Drogue Panels||Flexible, Nylon cloth
{| class="Sensors" border="2"
|-
! Sensors
|-
|Sea Surface Temperature
|Sensor Scientific Thermistor Model WM 103
|-
|Battery Voltage
|Precision Resistive Divider on CC Board
|}



==Deployment Methods==
The SLDMB can be deployed from fixed and rotary wing aircraft and vessels. Specific instructions for each USCG aircraft are available through the METOCEAN User’s manual as well a Coast Guard SAR publications. In general, personnel operating rotary aircraft should not deploy the SLDMB with a speed greater than 80 knots or height greater than 150 feet. <ref name="METOCEAN"/> Personnel operating fixed wing aircraft should not deploy the SLDMB with a speed greater than 150 knots and an altitude greater than 1000 feet. <ref name="METOCEAN"/>

==Environmental Characteristics==
The SLDMB is designed to operate at a minimum for 15 days and turn off automatically after 30 days. The specific operating environment and survival environment characteristics are listed in Table 1. <ref name="METOCEAN"/> The SLDMBs are designed for storage up to 24 months. <ref name="METOCEAN"/> The SLDMBs are typically not used in an official capacity after expiration.


{| class="Operation" border="2"
|-
|-
Operation
! Operation
|-
|-
Air Temperature||-20°C to +35° C
|Air Temperature
|<nowiki>-</nowiki>20°C to +35° C
|-
|-
Water Temperature||-2°C to +35° C
|Water Temperature
|<nowiki>-</nowiki>2°C to +35° C
|-
|-
Water Type||Fresh or Salt
|Water Type
|Fresh or Salt
|-
|-
Significant Wave Height||8.0 meter height
|Significant Wave Height
|8.0 meter height
|-
|-
Wind Speed (at 10m)||20 meters/sec (38.9 knots)
|Wind Speed (at 10m)
|20 meters/sec (38.9 knots)
|-
|-
Wind Gusts||30 meters/sec (58.4 knots)
|Wind Gusts
|30 meters/sec (58.4 knots)
|-
|-
Humidity||100% (external)
|Humidity
|100% (external)
|-
|-
Sunlight||Direct Exposure
|Sunlight
|Direct Exposure
|-
|-
Operating Life||Minimum 15 days at 10° C (Auto shut off at 30 days)
|Operating Life
|Minimum 15 days at 10° C (Auto shut off at 30 days)
|-
|-
Power Supply||10 Alkaline-manganese dioxide D cells
|Power Supply
|10 Alkaline-manganese dioxide D cells
|}


{| class="Survival" border="2"
|-
|-
Survival
! Survival
|-
|-
Air Temperature||-30°C to +35° C
|Air Temperature
|<nowiki>-</nowiki>30°C to +35° C
|-
|-
Water Temperature||-2°C to +35° C
|Water Temperature
|<nowiki>-</nowiki>2°C to +35° C
|-
|-
Water Type||Fresh or Salt
|Water Type
|Fresh or Salt
|-
|-
Significant Wave Height||12.0 meter height
|Significant Wave Height
|12.0 meter height
|-
|-
Wind Speed (at 10m)||35 meters/sec (68.0 knots)
|Wind Speed (at 10m)
|35 meters/sec (68.0 knots)
|-
Electronics
|-
ARGOS PTT||METOCEAN Model MAT 906
|-
GPS Receiver||NAVMAN Jupiter 21 Model TU21-D450-031
|-
Sensors
|-
Sea Surface Temperature||Sensor Scientific Thermistor Model WM 103
|-
Battery Voltage||Precision Resistive Divider on CC Board
|}
|}






==Search and Rescue Application==
==Mechanical Design==
The search and rescue of vessels and people inshore and on the high seas are highly reliant upon accurate and timely surface current information. The United States Coast Guard (USCG) uses the Self-Locating Datum Marker Buoys (SLDMB) developed by METOCEAN Data Systems as part of the search and rescue (SAR) system. Since the SLDMB has a very small surface area above the ocean surface and a high underwater surface area, there is very little leeway in response to the direct forcing of winds and waves. <ref name="Bang"/> Additionally, the CODE design is an inexpensive design allowing a large number to be deployed. <ref name="Davis"/> This is advantageous for the USCG who conducts approximately 5000 searches per year and who maintains at least 600 SLDMBs for use in operational cases. <ref name="Bang"/> The USCG uses these drifters to construct current vectors from sequential SLDMB positions. <ref name="Bang"/> In conjunction with the Search and Rescue Optimal Search Planning System (SAROPS) the USCG is able to establish the ocean surface motion of a component of the object of the search.
:The SLDMB design is based upon the Davis-style drifting buoy, which minimizes the affects of wind and waves on the drifter allowing for a more accurate representation of the surface currents. <ref name="Davis">[Davis, R. E. (1985). Drifter Observations of Coastal Surface Currents During CODE: The Method and Descriptive View. Journal of Geophysical Research, 90(C3), 14.].</ref> The SLDMB is shown in Figure 1 with four orthogonal drag vanes that are constructed of nylon fabric and supported by PVC arms that extend from a cylindrical hull. <ref name="Bang">[Bang, I., Mooers, C. N. K., Haus, B., Turner, C., Lewandowski, M. (2007). Technical Report: Surface Drifter Advection and Dispersion in the Florida Current Between key West and Jacksonville, Florida. Technical Report.].</ref> Four floats attach to the PVC arms that maintain the buoyancy of the SLDMB. <ref name="Bang"/>
:Prior to launch, the SLDMB is packaged in a circular cylinder, which can be launched through a hatch or door in any fixed or rotating wing aircraft or from any surface vessel moving up to 35 knots. The SLDMB is made up of a Deployment Assembly and a Surface Unit. The Deployment Assembly controls the aerial decent and breaks away along with the parachute when the buoy hits the water while the Surface Unit consists of an aluminum cylinder with the drogue panels attached. <ref name="METOCEAN"/> All of the electronics are switched on after the arms deploy. Figure 2 and 3 illustrate the SLDMB in a packaged state and then deployed.
:The SLDMB parachute is square with two diagonal slits offset from the corners. The chute is 27 inches per side. The slits allow some airflow through the chute providing a flight time of 3 to 5 seconds. This design prevents the buoy from drifting off course and ensuring that it lands within 100 meters of the aircraft track. <ref name="METOCEAN"/>


One or more SLDMBs should be deployed for any case where higher resolution current data is needed to effectively plan a search. One example is a case that lies in or near the Gulf Stream where there are strong horizontal current variations. SLDMBs should be dropped as early as possible during the case as the goal is to provide timely and accurate drift of the search and rescue object. SLDMBs may even be pre-deployed at the beginning of period where higher boating traffic is expected such as at the start of a long weekend during the summer or at the beginning of a fishing tournament <ref name="IAMSAR">[U.S. COAST GUARD ADDENDUM TO THE UNITED STATES NATIONAL SEARCH AND RESCUE SUPPLEMENT (NSS) TO THE INTERNATIONAL AERONAUTICAL AND MARITIME SEARCH AND RESCUE MANUAL (IAMSAR) (2004). Retrieved from http://www.uscg.mil/directives/listing_cim.asp?id=3000-3999.] </ref>
==Electronic Design==
:The SLDMB electronics package consist of the METOCEAN Model MAT 906 (Argos package), the Sensor Scientific Thermistor Model WM 103 that measures sea surface temperature, the Precision resistive divider for battery voltage, and the GPS receiver (Conexant Jupiter Model TU30-D140-231). <ref name="METOCEAN"/> All electronics are located at the bottom of the Surface Unit along with a power supply consisting of 10 “D” sized cells providing a minimum 15-day operating life. The antenna assembly is spring-loaded and raises the antenna to approximately 15.8 inches above the ocean surface. <ref name="METOCEAN"/> The ARGOS Data Transmission Format as well as the decoding equations are located in the METOCEAN User’s Manual.


The number and placement of SLDMBs are dependent upon the type of case and location that is presented to the SAR controller. A single SLDMB can be used in the vicinity of the last known position where the time lag between the distress incident and deployment is reasonable short. Multiple SLDMBs should be used where the last know position is not known. This is the case for an overdue vessel or vessel and crew who were fishing in a known fishing area <ref name="IAMSAR"/>
==Deployment Methods==
:The SLDMB can be deployed from fixed and rotary wing aircraft and vessels. Specific instructions for each USCG aircraft are available through the METOCEAN User’s manual as well a Coast Guard SAR publications. In general, personnel operating rotary aircraft should not deploy the SLDMB with a speed greater than 80 knots or height greater than 150 feet. <ref name="METOCEAN"/> Personnel operating fixed wing aircraft should not deploy the SLDMB with a speed greater than 150 knots and an altitude greater than 1000 feet. <ref name="METOCEAN"/>


The use of METOCEAN SLDMBs provides valuable real-time current information to the search and rescue controller and ultimately provides a better search area.
==Environmental Characteristics==
:The SLDMB is designed to operate at a minimum for 15 days and turn off automatically after 30 days. The specific operating environment and survival environment characteristics are listed in Table 1. <ref name="METOCEAN"/> The SLDMBs are designed for storage up to 24 months. <ref name="METOCEAN"/> The SLDMBs are typically not used in an official capacity after expiration.

==Search and Rescue Application==
:The search and rescue of vessels and people inshore and on the high seas are highly reliant upon accurate and timely surface current information. The United States Coast Guard (USCG) uses the Self-Locating Datum Marker Buoys (SLDMB) developed by METOCEAN Data Systems as part of the search and rescue (SAR) system. Since the SLDMB has a very small surface area above the ocean surface and a high underwater surface area, there is very little leeway in response to the direct forcing of winds and waves. <ref name="Bang"/> Additionally, the CODE design is an inexpensive design allowing a large number to be deployed. <ref name="Davis"/> This is advantageous for the USCG who conducts approximately 5000 searches per year and who maintains at least 600 SLDMBs for use in operational cases. <ref name="Bang"/> The USCG uses these drifters to construct current vectors from sequential SLDMB positions. <ref name="Bang"/> In conjunction with the Search and Rescue Optimal Search Planning System (SAROPS) the USCG is able to establish the ocean surface motion of a component of the object of the search.
:One or more SLDMBs should be deployed for any case where higher resolution current data is needed to effectively plan a search. One example is a case that lies in or near the Gulf Stream where there are strong horizontal current variations. SLDMBs should be dropped as early as possible during the case as the goal is to provide timely and accurate drift of the search and rescue object. SLDMBs may even be pre-deployed at the beginning of period where higher boating traffic is expected such as at the start of a long weekend during the summer or at the beginning of a fishing tournament <ref name="IAMSAR">[U.S. COAST GUARD ADDENDUM TO THE UNITED STATES NATIONAL SEARCH AND RESCUE SUPPLEMENT (NSS) TO THE INTERNATIONAL AERONAUTICAL AND MARITIME SEARCH AND RESCUE MANUAL (IAMSAR) (2004). Retrieved from http://www.uscg.mil/directives/listing_cim.asp?id=3000-3999.] </ref>
:The number and placement of SLDMBs are dependent upon the type of case and location that is presented to the SAR controller. A single SLDMB can be used in the vicinity of the last known position where the time lag between the distress incident and deployment is reasonable short. Multiple SLDMBs should be used where the last know position is not known. This is the case for an overdue vessel or vessel and crew who were fishing in a known fishing area <ref name="IAMSAR"/>
:The use of METOCEAN SLDMBs provides valuable real-time current information to the search and rescue controller and ultimately provides a better search area.




Revision as of 19:46, 13 October 2008

Template:Under-Construction

Self-Locating Datum Marker Buoys (SLDMB) – A 70% scale Coastal Ocean Dynamics Experiment (CODE)/Davis-style oceanographic surface drifter with drogue vanes between 30 and 100 cm deep. [1] The SLDMB is designed for air deployment and for unattended operation. Similarly to other SLDMB systems, the METOCEAN SLDMB is accompanied by an onboard electronics package, which includes Global Positioning System (GPS) positioning and sensor data [1] Service Argo, Inc, receives the data and forwards it to the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting n-series satellites every 30 minutes. [1]


  • Caption1
    Caption1
  • Caption2
    Caption2


Mechanical Design

The SLDMB design is based upon the Davis-style drifting buoy, which minimizes the affects of wind and waves on the drifter allowing for a more accurate representation of the surface currents. [2] The SLDMB is shown in Figure 1 with four orthogonal drag vanes that are constructed of nylon fabric and supported by PVC arms that extend from a cylindrical hull. [3] Four floats attach to the PVC arms that maintain the buoyancy of the SLDMB. [3]

Prior to launch, the SLDMB is packaged in a circular cylinder, which can be launched through a hatch or door in any fixed or rotating wing aircraft or from any surface vessel moving up to 35 knots. The SLDMB is made up of a Deployment Assembly and a Surface Unit. The Deployment Assembly controls the aerial decent and breaks away along with the parachute when the buoy hits the water while the Surface Unit consists of an aluminum cylinder with the drogue panels attached. [1] All of the electronics are switched on after the arms deploy. Figure 2 and 3 illustrate the SLDMB in a packaged state and then deployed.

The SLDMB parachute is square with two diagonal slits offset from the corners. The chute is 27 inches per side. The slits allow some airflow through the chute providing a flight time of 3 to 5 seconds. This design prevents the buoy from drifting off course and ensuring that it lands within 100 meters of the aircraft track. [1]

SLDMB Dimensions
Buoy Prior to Deployment
Packaged Length 1092 mm (43.0 inches)
Diameter 203.2 mm (8.0 inches)
Weight 11.3 Kg ( 25.0 pounds)
Deployed Surface Unit
Hull Diameter 102 mm (4.0 inches)
Total height 1400 mm (55.0 inches)
Total cross section width 1090 mm 43 inches)
Drogue Vane 500 mm (19.6 inches) X 650 mm (25.6 inches)
Length of Exposed Mast 400 mm (16.0 inches)
Float size (each is • of the cylinder) 133 mm (5.25 in) diameter X 216 mm ( 8.5 in) long
Weight In Air 8.0 kg (17.5 pounds)


Buoy Construction
Hull Heavy gauge marine grade aluminum
Flotation Four quarter cylinder foam floats
Antenna Top-loaded truncated monopole ARGOS antenna with active GPS element antenna above
Drogue Panels Flexible, Nylon cloth

Electronic Design

The SLDMB electronics package consist of the METOCEAN Model MAT 906 (Argos package), the Sensor Scientific Thermistor Model WM 103 that measures sea surface temperature, the Precision resistive divider for battery voltage, and the GPS receiver (Conexant Jupiter Model TU30-D140-231). [1] All electronics are located at the bottom of the Surface Unit along with a power supply consisting of 10 “D” sized cells providing a minimum 15-day operating life. The antenna assembly is spring-loaded and raises the antenna to approximately 15.8 inches above the ocean surface. [1] The ARGOS Data Transmission Format as well as the decoding equations are located in the METOCEAN User’s Manual.

Electronics
ARGOS PTT METOCEAN Model MAT 906
GPS Receiver NAVMAN Jupiter 21 Model TU21-D450-031


Sensors
Sea Surface Temperature Sensor Scientific Thermistor Model WM 103
Battery Voltage Precision Resistive Divider on CC Board


Deployment Methods

The SLDMB can be deployed from fixed and rotary wing aircraft and vessels. Specific instructions for each USCG aircraft are available through the METOCEAN User’s manual as well a Coast Guard SAR publications. In general, personnel operating rotary aircraft should not deploy the SLDMB with a speed greater than 80 knots or height greater than 150 feet. [1] Personnel operating fixed wing aircraft should not deploy the SLDMB with a speed greater than 150 knots and an altitude greater than 1000 feet. [1]

Environmental Characteristics

The SLDMB is designed to operate at a minimum for 15 days and turn off automatically after 30 days. The specific operating environment and survival environment characteristics are listed in Table 1. [1] The SLDMBs are designed for storage up to 24 months. [1] The SLDMBs are typically not used in an official capacity after expiration.


Operation
Air Temperature -20°C to +35° C
Water Temperature -2°C to +35° C
Water Type Fresh or Salt
Significant Wave Height 8.0 meter height
Wind Speed (at 10m) 20 meters/sec (38.9 knots)
Wind Gusts 30 meters/sec (58.4 knots)
Humidity 100% (external)
Sunlight Direct Exposure
Operating Life Minimum 15 days at 10° C (Auto shut off at 30 days)
Power Supply 10 Alkaline-manganese dioxide D cells


Survival
Air Temperature -30°C to +35° C
Water Temperature -2°C to +35° C
Water Type Fresh or Salt
Significant Wave Height 12.0 meter height
Wind Speed (at 10m) 35 meters/sec (68.0 knots)


Search and Rescue Application

The search and rescue of vessels and people inshore and on the high seas are highly reliant upon accurate and timely surface current information. The United States Coast Guard (USCG) uses the Self-Locating Datum Marker Buoys (SLDMB) developed by METOCEAN Data Systems as part of the search and rescue (SAR) system. Since the SLDMB has a very small surface area above the ocean surface and a high underwater surface area, there is very little leeway in response to the direct forcing of winds and waves. [3] Additionally, the CODE design is an inexpensive design allowing a large number to be deployed. [2] This is advantageous for the USCG who conducts approximately 5000 searches per year and who maintains at least 600 SLDMBs for use in operational cases. [3] The USCG uses these drifters to construct current vectors from sequential SLDMB positions. [3] In conjunction with the Search and Rescue Optimal Search Planning System (SAROPS) the USCG is able to establish the ocean surface motion of a component of the object of the search.

One or more SLDMBs should be deployed for any case where higher resolution current data is needed to effectively plan a search. One example is a case that lies in or near the Gulf Stream where there are strong horizontal current variations. SLDMBs should be dropped as early as possible during the case as the goal is to provide timely and accurate drift of the search and rescue object. SLDMBs may even be pre-deployed at the beginning of period where higher boating traffic is expected such as at the start of a long weekend during the summer or at the beginning of a fishing tournament [4]

The number and placement of SLDMBs are dependent upon the type of case and location that is presented to the SAR controller. A single SLDMB can be used in the vicinity of the last known position where the time lag between the distress incident and deployment is reasonable short. Multiple SLDMBs should be used where the last know position is not known. This is the case for an overdue vessel or vessel and crew who were fishing in a known fishing area [4]

The use of METOCEAN SLDMBs provides valuable real-time current information to the search and rescue controller and ultimately provides a better search area.


  1. ^ a b c d e f g h i j k [METOCEAN. (2008). METOCEAN SLDMB: Operating & Maintenance Manual (Version 3.0 ed.).
  2. ^ a b [Davis, R. E. (1985). Drifter Observations of Coastal Surface Currents During CODE: The Method and Descriptive View. Journal of Geophysical Research, 90(C3), 14.].
  3. ^ a b c d e [Bang, I., Mooers, C. N. K., Haus, B., Turner, C., Lewandowski, M. (2007). Technical Report: Surface Drifter Advection and Dispersion in the Florida Current Between key West and Jacksonville, Florida. Technical Report.].
  4. ^ a b [U.S. COAST GUARD ADDENDUM TO THE UNITED STATES NATIONAL SEARCH AND RESCUE SUPPLEMENT (NSS) TO THE INTERNATIONAL AERONAUTICAL AND MARITIME SEARCH AND RESCUE MANUAL (IAMSAR) (2004). Retrieved from http://www.uscg.mil/directives/listing_cim.asp?id=3000-3999.]
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=User:Kbernstein/SLDMB&oldid=245059363"