Polavision: Difference between revisions
Added New York Times citation for Land's departure from Polaroid. |
|||
| Line 1: | Line 1: | ||
'''Polavision''' was an instant [[movie camera]] system launched by [[Polaroid Corporation|Polaroid]] in |
'''Polavision''' was an instant [[movie camera]] system launched by [[Polaroid Corporation|Polaroid]] in 1977. |
||
Unlike other motion-picture [[photographic film|film stock]] of the time, Polavision generated color using an [[additive color|additive]] process. It consisted of (essentially) a black-and-white film base and three-color filter layer.<ref name="landlist">[http://www.rwhirled.com/landlist/landfilm.htm The Land List -- Film Index], The Land List. (Sections: "Type 608", Additive process, density problems; "Polachrome CS", Polavision/Polachrome negative differences.) Article retrieved [[2006-12-01]].</ref> In this sense, it was somewhat similar to the much earlier [[Dufaycolor]] process. |
Unlike other motion-picture [[photographic film|film stock]] of the time, Polavision generated color using an [[additive color|additive]] process. It consisted of (essentially) a black-and-white film base and three-color filter layer.<ref name="landlist">[http://www.rwhirled.com/landlist/landfilm.htm The Land List -- Film Index], The Land List. (Sections: "Type 608", Additive process, density problems; "Polachrome CS", Polavision/Polachrome negative differences.) Article retrieved [[2006-12-01]].</ref> In this sense, it was somewhat similar to the much earlier [[Dufaycolor]] process. |
||
| Line 18: | Line 18: | ||
'''Polachrome''' was an "instant" 35mm color [[reversal film|transparency]] film. It was descended from the Polavision system and used the same additive color (filter) process. One difference was that with Polavision, the negative layer remained as part of the film after processing. It was intended to turn transparent after a short while, but the process was reportedly imperfect, reducing contrast. With Polachrome, the black negative layer was discarded after processing.<ref name="landlist" /> |
'''Polachrome''' was an "instant" 35mm color [[reversal film|transparency]] film. It was descended from the Polavision system and used the same additive color (filter) process. One difference was that with Polavision, the negative layer remained as part of the film after processing. It was intended to turn transparent after a short while, but the process was reportedly imperfect, reducing contrast. With Polachrome, the black negative layer was discarded after processing.<ref name="landlist" /> |
||
Polaroid also produced a black-and-white instant slide film called '''Polapan'''.<ref name="hawaiicis">[http://www.cis.hawaii.edu/GraphicsHome/SelfService/SSPolaroid.html "Self Service Polaroid Bravo Slides], Center for Instructional Support, University of Hawai‘i.<!--*** BACKQUOTE intentional; THEY spell it that way on their site. ***--> Article revised June |
Polaroid also produced a black-and-white instant slide film called '''Polapan'''.<ref name="hawaiicis">[http://www.cis.hawaii.edu/GraphicsHome/SelfService/SSPolaroid.html "Self Service Polaroid Bravo Slides], Center for Instructional Support, University of Hawai‘i.<!--*** BACKQUOTE intentional; THEY spell it that way on their site. ***--> Article revised June 1996, retrieved [[2006-12-01]].</ref> PolaPan is a contraction of Polaroid and Panchromatic and it was additionally used in connection with Polaroid picture roll print films Type 42 PolaPan 200 (200 ASA film speed) (also Type 32) and Type 44 PolaPan 400 (400 ASA film speed in Daylight). Polaroid also produced '''PolaScope''' film Type 410 10,000 ASA high contrast specificaly for photographing oscilloscope ("scope") traces. |
||
==References== |
==References== |
||
Revision as of 03:13, 9 November 2008
Polavision was an instant movie camera system launched by Polaroid in 1977.
Unlike other motion-picture film stock of the time, Polavision generated color using an additive process. It consisted of (essentially) a black-and-white film base and three-color filter layer.[1] In this sense, it was somewhat similar to the much earlier Dufaycolor process.
The Polavision cartridge was a small rectangular box with the film reels self-contained, along with a small lens and prism for projection at an open gate. Unless viewed in a Polavision viewer, the only way that developed films can be viewed was by destroying the cartridge and projecting in an super 8mm projector, a super 8mm telecine system, or other transferring procedures. The film format was similar to the Super 8mm format.
Due to the light-loss caused by the filtering layer (only one of red, green or blue was let through for a given portion of film), the resulting film had relatively low light sensitivity (40 ASA) and the resulting footage was much denser than with other processes.[1] As a result, Polaroid designed a standalone table-top projector/viewer, which was intended to reduce the problems inherent in projecting such dense film.[1] The viewer used a translucent screen, projecting the image from behind, but critics from publications like Consumer Reports called the images "murky and dark."
In addition to the density problems, the process was late to market and had to compete with upcoming videocassette-based systems like Betamax and VHS. Unlike videotape, Polavision films, once developed, could not be reused nor played on a television. Polavision proved to be an expensive failure, and most of the manufactured equipment was sold off in 1979 as a job lot at a loss of $68.5 million. In the wake of those losses, Polaroid chairman and founder Edwin H. Land resigned the chief executive position in 1980 and left the company two years later. [2]
Former Polaroid freelancer Paul Giambarba remarks
- "I tried using the product but it was obviously a turkey compared to anything I was using that Kodak offered [..] Instant movie film was an engineering achievement but it's precisely what separated Polaroid techies from Polaroid pragmatists. There just weren't enough customers out there on whom to work the magic."[3]
Polachrome and Polapan
Polaroid's instant transparency system for still photography was introduced in 1985, and was based around the AutoProcessor.[4]
Polachrome was an "instant" 35mm color transparency film. It was descended from the Polavision system and used the same additive color (filter) process. One difference was that with Polavision, the negative layer remained as part of the film after processing. It was intended to turn transparent after a short while, but the process was reportedly imperfect, reducing contrast. With Polachrome, the black negative layer was discarded after processing.[1]
Polaroid also produced a black-and-white instant slide film called Polapan.[5] PolaPan is a contraction of Polaroid and Panchromatic and it was additionally used in connection with Polaroid picture roll print films Type 42 PolaPan 200 (200 ASA film speed) (also Type 32) and Type 44 PolaPan 400 (400 ASA film speed in Daylight). Polaroid also produced PolaScope film Type 410 10,000 ASA high contrast specificaly for photographing oscilloscope ("scope") traces.
References
- ^ a b c d The Land List -- Film Index, The Land List. (Sections: "Type 608", Additive process, density problems; "Polachrome CS", Polavision/Polachrome negative differences.) Article retrieved 2006-12-01.
- ^ Blumstein, Michael, "Era Ends as Land Leaves Polaroid", The New York Times, July 28, 1982. Article dated 1982-07-28, retrieved 2008-11-06.
- ^ Giambarba, Paul, "The Last Hurrah – Polavision, 1977", "The Branding of Polaroid 1957-1977". Article dated 2004-09-01, retrieved 2006-12-01.
- ^ Polaroid 35mm Instant Slide Film: Introduction and Overview, Jim's Web. Page no longer exists, accessed via the Wayback Machine web archive. Article retrieved 2006-12-01.
- ^ "Self Service Polaroid Bravo Slides, Center for Instructional Support, University of Hawai‘i. Article revised June 1996, retrieved 2006-12-01.
See also
External links
- "The Last Hurrah – Polavision, 1977" by Paul Giambarba.
- Polaroid Picture Rolls
- "Era Ends as Land Leaves Polaroid", The New York Times, July 28, 1982.