Resaw: Difference between revisions

Content deleted Content added

Inline

Revision as of 10:24, 1 July 2009

A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade - commonly 2" to 3" (52 - 78 mm) - with a small kerf to minimize waste. Resaw blades of up to 1" (26 mm) may be fitted to a standard band saw. Many small & medium sized sawmills use 1"-1-1/2" band saw blades. Manufacturers of these blades are Wood-Mizer, Lenox Saw, Edge Manufacturing & Munkforsagar.

Timber mills use larger resaws to rip large planks into smaller sizes. A typical mill sized resaw is eight inches wide and made with 16 gauge steel. Resaws can be identified by their flat back, as opposed to headsaws and doublecuts which don't have a flat back.

References

This tool article is a stub. You can help Wikipedia by expanding it.

@@ Line 1: / Line 1: @@
 [[Image:Band saw blades.jpg|thumb|250px|Resaw blades used in a [[sawmill]].]]
-A '''resaw''' is a large [[band saw]] optimized for cutting timber along the grain to reduce larger sections into smaller sections or [[Wood veneer|veneers]]. Resawing veneers requires a wide blade - commonly 2" to 3" (52 - 78&nbsp;mm) - with a small [[kerf]] to minimize waste. Resaw blades of up to 1" (26&nbsp;mm) may be fitted to a standard band saw. Many small & medium sized sawmills use 1"-1-1/2" band saw blades. Manufacturers of these blades are Lenox Saw, Edge Manufacturing & Munkforsagar.
+A '''resaw''' is a large [[band saw]] optimized for cutting timber along the grain to reduce larger sections into smaller sections or [[Wood veneer|veneers]]. Resawing veneers requires a wide blade - commonly 2" to 3" (52 - 78&nbsp;mm) - with a small [[kerf]] to minimize waste. Resaw blades of up to 1" (26&nbsp;mm) may be fitted to a standard band saw. Many small & medium sized sawmills use 1"-1-1/2" band saw blades. Manufacturers of these blades are Wood-Mizer, Lenox Saw, Edge Manufacturing & Munkforsagar.
 [[Sawmill|Timber mills]] use larger resaws to rip large planks into smaller sizes. A typical mill sized resaw is eight inches wide and made with 16 gauge steel. Resaws can be identified by their flat back, as opposed to [[head saw|headsaws]] and doublecuts which don't have a flat back.