Hardness: Difference between revisions
m Reverted 1 edit by 71.75.173.194 identified as vandalism to last revision by TXiKiBoT. using TW |
No edit summary Tag: repeating characters |
||
| Line 1: | Line 1: | ||
HARRRRD DICK AHHH YEAHHHhhhhhhhh |
|||
{{This|mechanical properties of materials|Hard}} |
|||
chan is the best |
|||
'''Hardness''' refers to various properties of [[matter]] in the [[solid]] [[Phase (matter)|phase]] that give it high resistance to various kinds of shape change when [[force]] is applied. '''Hard matter''' is contrasted with [[soft matter]]. |
|||
Macroscopic hardness is generally characterized by strong [[intermolecular bond]]s. However, the behavior of solid materials under force is complex, resulting in several different scientific definitions of what might be called "hardness" in everyday usage. |
|||
In [[materials science]], there are three principal [[operational definition]]s of hardness: |
|||
* '''Scratch hardness''': Resistance to [[fracture]] or plastic (permanent) [[deformation]] due to friction from a sharp object |
|||
* '''Indentation hardness''': Resistance to plastic (permanent) [[deformation]] due to a constant load from a sharp object |
|||
* '''Rebound hardness''': Height of the bounce of an object dropped on the material, related to [[elasticity (physics)|elasticity]]. |
|||
In physics, hardness encompasses: |
|||
* [[Elasticity (physics)|Elasticity]], [[plasticity (physics)|plasticity]], [[viscosity]], and [[viscoelasticity]] |
|||
* [[Strength of materials|Strength]] and [[Strain (materials science)|strain]] |
|||
* [[Brittleness]]/[[ductility]] and [[toughness]] |
|||
The equation based definition of hardness is the pressure applied over the projected contact area between the indenter and the material being tested. As a result hardness values are typically reported in units of pressure, although this is only a "true" pressure if the indenter and surface interface is perfectly flat. |
|||
==Materials science== |
==Materials science== |
||
[[Image:Vickers-tester.png|thumb|A Vickers hardness tester]] |
[[Image:Vickers-tester.png|thumb|A Vickers hardness tester]] |
||
Revision as of 14:51, 4 September 2009
HARRRRD DICK AHHH YEAHHHhhhhhhhh chan is the best
Materials science
Hardness is a characteristic of a solid material expressing its resistance to permanent deformation. Hardness can be measured on the Mohs scale or various other scales. Some of the other scales used for indentation hardness in engineering—Rockwell, Vickers, and Brinell—can be compared using practical conversion tables.
When testing metals, indentation hardness correlates linearly with tensile strength. This important relation permits economically important nondestructive testing of bulk metal deliveries with lightweight, even portable equipment, such as hand-held Rockwell hardness testers. [1]
Hardness increases with decreasing particle size. This is known as the Hall-Petch relationship. However, below a critical grain-size, hardness decreases with decreasing grain size. This is known as the inverse Hall-Petch effect.
It is important to note that hardness of a material to deformation is dependent on its microdurability or small-scale shear modulus in any direction, not to any rigidity or stiffness properties such as its bulk modulus or Young's modulus. Scientists and journalists often confuse stiffness for hardness,[2][3] and spuriously report materials that are not actually harder than diamond because the anisotropy of their solid cells compromise hardness in other dimensions, resulting in a material prone to spalling and flaking in squamose or acicular habits in that dimension (e.g., osmium is stiffer than diamond but only as hard as quartz). In other words, a claimed hard material should have similar hardness characteristics at any location on its surface.
Scratch hardness
In mineralogy, hardness commonly refers to a material's ability to penetrate softer materials. An object made of a hard material will scratch an object made of a softer material. Scratch hardness is usually measured on the Mohs scale of mineral hardness. One tool to make this measurement is the sclerometer.
Pure diamond is the hardest readily-available natural mineral substance and will scratch any other natural material. Diamond is therefore used to cut other diamonds; in particular, higher-grade diamonds are used to cut lower-grade diamonds.
The hardest substance known today is aggregated diamond nanorods - a nanocrystalline form of diamond. Estimates from proposed molecular structure indicate the hardness of beta carbon nitride should also be greater than diamond (but less than aggregated diamond nanorods). This material has not yet been successfully synthesized.
For a list of materials harder than diamond, see Diamond#Materials harder than diamond.
Indentation hardness
Indentation hardness tests are primarily used in engineering and metallurgy fields. The tests work on the basic premise of measuring the critical dimensions of an indentation left by a specifically dimensioned and loaded indenter.
Rebound hardness
Also known as dynamic hardness, rebound hardness measures the height of the "bounce" of a diamond-tipped hammer dropped from a fixed height onto a material. The device used to take this measurement is known as a scleroscope.[4]
One scale that measures rebound hardness is the Bennett hardness scale.
Physics
In solid mechanics, solids generally have three responses to force, depending on the amount of force and the type of material:
- They exhibit elasticity—the ability to temporarily change shape, but return to the original shape when the pressure is removed. "Hardness" in the elastic range—a small temporary change in shape for a given force—is known as stiffness in the case of a given object, or a high elastic modulus in the case of a material.
- They exhibit plasticity—the ability to permanently change shape in response to the force, but remain in one piece. The yield strength is the point at which elastic deformation gives way to plastic deformation. Deformation in the plastic range is non-linear, and is described by the stress-strain curve. This response produces the observed properties of scratch and indentation hardness, as described and measured in materials science. Some materials exhibit both elasticity and viscosity when undergoing plastic deformation; this is called viscoelasticity.
- They fracture—split into two or more pieces. The "ultimate strength" or toughness of an object is the point at which fracture occurs.
Strength is a measure of the extent of a material's elastic range, or elastic and plastic ranges together. This is quantified as compressive strength, shear strength, tensile strength depending on the direction of the forces involved. Ultimate strength is measure of the maximum strain a material can withstand.
Brittleness, in technical usage, is the tendency of a material to fracture with very little or no detectable deformation beforehand. Thus in technical terms, a material can be both brittle and strong. In everyday usage "brittleness" usually refers to the tendency to fracture under a small amount of force, which exhibits both brittleness and a lack of strength (in the technical sense). For brittle materials, yield strength and ultimate strength are the same, because they do not experience detectable plastic deformation. The opposite of brittleness is ductility.
The toughness of a material is the maximum amount of energy it can absorb before fracturing, which is different than the amount of force that can be applied. Toughness tends to be small for brittle materials, because it is elastic and plastic deformations that allow materials to absorb large amounts of energy.
Materials whose properties are different in different directions (because of an asymmetrical crystal structure) are referred to as anisotropic.
See also
Other strengthening mechanisms
Hard materials
References
Notes
- ^ Correlation of Yield Strength and Tensile Strength with Hardness for Steels , E.J. Pavlina and C.J. Van Tyne, Journal of Materials Engineering and Performance, Volume 17, Number 6 / December, 2008
- ^ Jeandron, Michelle (2005-08-25), "Diamonds are not forever", Physics World
- ^ San-Miguel, A.; et al. (1999-05-19), "High Pressure Behavior of Silicon Clathrates: A New Class of Low Compressibility Materials", Physical Review, 83 (25): 5290, doi:10.1103/PhysRevLett.83.5290
{{citation}}: Explicit use of et al. in:|last2=(help) - ^ Allen, Robert (2006-12-10), A guide to rebound hardness and scleroscope test, retrieved 2008-09-08
Bibliography
- Dieter, George E. (1989). Mechanical Metallurgy (SI Metric Adaptation ed.). Maidenhead, UK: McGraw-Hill Education. ISBN ISBN 0-07-100406-8.
{{cite book}}: Check|isbn=value: invalid character (help) - Malzbender, J (2003). "Comment on hardness definitions". Journal of the European Ceramics Society. 23: 1355. doi:10.1016/S0955-2219(02)00354-0.