Tape transport

Tape transport with dual pinch rollers - Technics-RS1520

Tape transport is the generic term for all parts of a magnetic tape player or recorder that the actual tape passes through. Transport parts include, but are not limited to, the head, capstan, pinch roller, tape pins, and tape guide. The tape transport as a whole is called the transport mechanism.

Tape head

Main article: Tape head

Capstan

The capstan is a rotating spindle used to move recording tape through the mechanism of a tape recorder. The tape is threaded between the capstan and one or more rubber-covered wheel, called a "pinch roller", which presses against the capstan, thus providing friction necessary for the capstan to pull the tape. The capstan is always placed "downstream" (in the direction of tape motion) from the tape heads. To maintain the required tension against the tape heads and other part of the tape transport, a small amount of drag is placed on the supply reel. Tape recorder capstans have a function similar to nautical capstans, which however have no pinch rollers, the line simply being wound around them.

The use of a capstan allows the tape to run at a precise and constant speed. Capstans are precision-machined spindles, and polished very smooth: any out-of-roundness or imperfections can cause uneven motion and an audible effect called flutter. The alternative to capstan drive, simply driving the tape takeup reel (which was used on some cheap tape recorders), causes problems both with the speed difference between a full and empty reel and with speed variations as described.

Dual capstans, where one is on each side of the heads, are claimed to provide even smoother tape travel across the heads and result in less variance in the recorded/playback signal.

Pinch roller

The pinch roller is a rubberized free spinning wheel typically used to press magnetic tape against a capstan shaft in order to create friction necessary to drive the tape along the magnetic heads (erase, write, read).

Most magnetic tape recorders use one capstan motor and one pinch roller located after the magnetic heads in the direction of the moving tape. However multiple pinch rollers may also be employed in association with one or more capstans. An example of the application of multiple pinch rollers is the Technics-RS1520 tape recorder which utilizes two pinch rollers located on the opposite sides of a single capstan shaft in order to provide a more stable transport across two sets of magnetic heads.

References

• Workbench Guide to Tape Recorder Servicing. G. Howard Poteet, 1977