Talk:Stack effect

SI equation was wrong

The constant of 0.342 was incorrect. I changed it to 0.0342 for pressures in kPa which I subsequently changed to 34.21 for pressures in Pa. The P was defined incorrectly as total pressure. I changed the definition to ΔP being the available pressure drop. I also added a caution that the equations only applied to buildings and they do not apply to combustion chimneys.

It very depressing to find mistakes like this in article. I can only assume that someone found the equation in the USA customary units and then made an order-of-magnitude error in converting to SI units by misplacing the decimal point. Such errors would not happen if people learned to always make a sanity check calculation before publishing an equation.- mbeychok 07:10, 12 April 2006 (UTC)

• It IS very depressing to find grammatical errors like this in AN article. Such errors would not happen if people learned to always proofread before publishing a statement. -- P199 12:33, 13 April 2006 (UTC)

Very cute!! But it evades the point that there are all too many mistakes in many of the Wikipedia technical articles. - mbeychok 15:43, 13 April 2006 (UTC)

Reverted the move and name change by User:Tmangray

User:Tmangray moved and changed the name of this article to "Chimney effect" simply because he unilaterally decided that it was a more common name than "Stack effect". I disagree with his change and with his having done so without any prior notice or discussion here on this Talk page. The most common usage by far in thousands of industrial plants and power plants worldwide is "Stack effect" as well as in the engineering/technical literature.

There is an existing article called "Chimney" in Wikipedia which has a section, Chimney#Chimney_draught_or_draft, devoted to the subject of stack effect or chimney effect. Any non-technical reader would probably go there first and would find that section. They don't need this article as well.

This article was intended for a more technical readership that encompasses industrial people (engineers, plant operators, plant managers) as well as science and engineering students,

I don't mean to be disrespectful or snide, but I don't think that User:Tmangray should appoint himself to unilaterally be the arbiter of what term is more common. Using the advanced search function in Google, the phrase "stack effect" got 71,000 hits and the phrase "chimney stack" got 49,400 hits. I have reverted the move and name change back to what it was before User:Tmangray changed it. - mbeychok 21:36, 18 July 2006 (UTC)

Just a postscript thought for User:Tmangray to consider: why not redirect Chimney effect to Chimney? Would that serve your purposes? - mbeychok 21:43, 18 July 2006 (UTC)

• I started this article (while Mbeychok greatly expanded it) and my intent was to explain the technical/physical aspects of the stack effect - this is the proper term because (as is explained in the article) the effect is not just limited to chimneys. Therefore I completely agree with User:Mbeychok on all his points and this article should remain "Stack Effect". -- P199 17:25, 19 July 2006 (UTC)

Nonsense qualification

The article currently says: "The equation applies only to buildings where air is both inside and outside the buildings." Does that really need to be said? How many buildings are there that do not have air both inside and outside? The few I can think of are vehicles like submarines and spacecraft, or structures like storage tanks, none of which are buildings as such. 129.97.79.144 19:10, 30 April 2007 (UTC)

Actually, it might be worth stating. An example of a "building" where this isn't the case is on board a ship. The boiler would be below the water line, requiring air to flow down prior to flowing up. Another example: shipboard fires. If there is a fire that is in a vertical compartment (ie, ladderwell) where the top is at teh waterline, the air would flow down, then back up, possibly effecting the dynamics. I'm not enough of an expert in either to quantify the effects. —Preceding unsigned comment added by 66.75.134.107 (talk) 16:00, 20 June 2009 (UTC)

Link missing

Ref 3 link is dead

Regards, Tom 211.147.76.161 (talk) 07:38, 23 February 2009 (UTC)
:₳New link is
http://www.wbdg.org/resources/naturalventilation.php Kennethjyoung (talk) 00:20, 4 July 2009 (UTC)

Reference cited doesn't provide equation used in article

That pressure difference ( ΔP ) is the driving force for the stack effect and it can be calculated with the equations presented below.^[1][2]

The equation used in the article doesn't match the citation reference equation. Kennethjyoung (talk) 00:28, 4 July 2009 (UTC)

missing explanation, where the constant C stems from

there should be a remark, how C was derived, which assumptions it is based on to make this number traceable. —Preceding unsigned comment added by 194.88.178.76 (talk) 08:57, 10 November 2009 (UTC)

Removed External Link

The external link directed me to a page that was essentially a purchase page for a related book. Very little useful information about the Stack Effect on the page itself. Removed the link. —Preceding unsigned comment added by 76.19.93.26 (talk) 14:42, 5 March 2010 (UTC)