Fine bubble diffusers: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
'''Fine bubble diffusers''' are a [[pollution control]] technology used to aerate wastewater for [[Sewage treatment|sewage treatment]]. They produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, [[sewage]], allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes. A fine bubble diffuser is commonly manufactured in various forms: tube, disc, plate, and dome.<ref>http://www.epa.gov/owm/mtb/fine.pdf</ref> |
'''Fine bubble diffusers''' are a [[pollution control]] technology used to aerate wastewater for [[Sewage treatment|sewage treatment]]. They produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, [[sewage]], allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes. A fine bubble diffuser is commonly manufactured in various forms: tube, disc, plate, and dome.<ref>http://www.epa.gov/owm/mtb/fine.pdf</ref> |
||
Line 15: | Line 14: | ||
Image:Image-DiscDiffuser.JPG|A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc.. |
Image:Image-DiscDiffuser.JPG|A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc.. |
||
Image:Fine Bubble Diffuser (Tube).jpg|Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc. |
Image:Fine Bubble Diffuser (Tube).jpg|Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc. |
||
Image:Fine bubble diffuser (Disc).jpg |
Image:Fine bubble diffuser (Disc).jpg|Aerating water by means of fine pore 9" Disc membrane diffuser. Compliments of Environmental Dynamics Inc |
||
</gallery> |
</gallery> |
||
Revision as of 15:50, 9 June 2010
Fine bubble diffusers are a pollution control technology used to aerate wastewater for sewage treatment. They produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, sewage, allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes. A fine bubble diffuser is commonly manufactured in various forms: tube, disc, plate, and dome.[1]
Bubble Size
The subject of bubble size is important because the aeration system in a wastewater or sewage treatment plant consumes an average of 50 to 70% of the energy of the entire plant.[2] Increasing the oxygen transfer efficiency decreases the power the plant requires to provide the same quality of effluent water. Furthermore, fine bubble diffusers evenly spread out (often referred to as a 'grid arrangement') on the floor of a tank, provide the operator of the plant a great deal of operational flexibility. This can be used to create zones with high oxygen concentrations (oxic or aerobic), zones with minimal oxygen concentration (anaerobic) and zones with no oxygen (anoxic). This allows for more precise targeting and removal of specific contaminants.
The importance of achieving ever smaller bubble sizes has been a hotly debated subject in the industry as ultra fine bubbles (micrometre size) are generally perceived to rise too slowly and provide too little "pumpage" to provide adequate mixing of sewage in an aeration tank. On the other hand, the industry standard "fine bubble" with a typical discharge diameter of 2 mm is probably larger than it needs to be for many plants. Average bubble diameters of 0.9 mm are possible nowadays, using special polyurethane (PUR) or special recently developed EPDM membranes.[citation needed]
Fine bubble diffusers have largely replaced coarse bubble diffusers and mechanical aerators in most of the developed world and in much of the developing world.
-
A Fine Bubble Diffuser in a Tank, courtesy of SSI Aeration, Inc..
-
Aerating water by means of fine pore membrane diffuser. Compliments of Environmental Dynamics Inc.
-
Aerating water by means of fine pore 9" Disc membrane diffuser. Compliments of Environmental Dynamics Inc
References
External Links
- [SSI Aeration http://www.stamfordscientific.com]
- [Aquaconsult Anlagenbau GmbH http://www.aquaconsult.at]