Jump to content

Coefficient of thermal expansion: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
made table sortable
changed initial sort to alpha
Line 118: Line 118:
!coefficient of volumetric thermal expansion ''β''<br>''β''(≈3''α'') in 10<sup>−6</sup>/C° at 20 °C
!coefficient of volumetric thermal expansion ''β''<br>''β''(≈3''α'') in 10<sup>−6</sup>/C° at 20 °C
|-
|-
|[[Gasoline]]
|[[Aluminium]]
|23
|~317
|69
|950<ref name="thermex1" />
|-
|[[Ethanol]]
|~250
|750<ref>Textbook: Young and Geller College Physics, 8e</ref>
|-
|[[Water]]
|~69
|207<ref name="thermex2">[http://www.efunda.com/materials/common_matl/Common_Matl.cfm?MatlPhase=Liquid&MatlProp=Thermal Properties of Common Liquid Materials<!-- Bot generated title -->]</ref>
|-
|[[Mercury (element)|Mercury]]
|~61
|182<ref name="thermex2" />
|-
|[[Rubber]]
|77
|231
|-
|[[Oak]] (perpendicular to the grain)
|54 <ref>[http://www.forestry.caf.wvu.edu/programs/woodindustries/wdsc340_7.htm WDSC 340. Class Notes on Thermal Properties of Wood<!-- Bot generated title -->]</ref>
|162
|-
|[[PVC]]
|52
|156
|-
|[[Pine]] (perpendicular to the grain)
|34
|102
|-
|-
|[[Benzocyclobutene]]
|[[Benzocyclobutene]]
|42
|42
|126
|126
|-
|[[Lead]]
|29
|87
|-
|[[Magnesium]]
|26
|78
|-
|[[Aluminium]]
|23
|69
|-
|-
|[[Brass]]
|[[Brass]]
Line 170: Line 130:
|57
|57
|-
|-
|[[Silver]]
|[[Carbon steel]]
|10.8
|18<ref>[http://hyperphysics.phy-astr.gsu.edu/hbase/tables/thexp.html#c1 Thermal Expansion Coefficients<!-- Bot generated title -->]</ref>
|32.4
|54
|-
|-
|[[Stainless steel]]
|[[Concrete]]
|12
|17.3
|36
|51.9
|-
|-
|[[Copper]]
|[[Copper]]
|17
|17
|51
|51
|-
|[[Diamond]]
|1
|3
|-
|[[Ethanol]]
|250~
|750<ref>Textbook: Young and Geller College Physics, 8e</ref>
|-
|[[Gallium(III) arsenide]]
|5.8
|17.4
|-
|[[Gasoline]]
|317~
|950<ref name="thermex1" />
|-
|[[Glass]]
|8.5
|25.5
|-
|[[Glass]], [[borosilicate]]
|3.3
|9.9
|-
|-
|[[Gold]]
|[[Gold]]
Line 186: Line 170:
|42
|42
|-
|-
|[[Nickel]]
|[[Indium phosphide]]
|13
|4.6
|13.8
|39
|-
|-
|[[Concrete]]
|[[Invar]]
|12
|1.2
|36
|3.6
|-
|[[Steel]], depends on composition
|11.0 ~ 13.0
|33.0 ~ 39.0
|-
|-
|[[Iron (element)|Iron]]
|[[Iron (element)|Iron]]
Line 202: Line 182:
|33.3
|33.3
|-
|-
|[[Carbon steel]]
|[[Lead]]
|29
|10.8
|87
|32.4
|-
|-
|[[MACOR]]
|[[MACOR]]
|9.3<ref>http://www.corning.com/docs/specialtymaterials/pisheets/Macor.pdf</ref>
|9.3<ref>http://www.corning.com/docs/specialtymaterials/pisheets/Macor.pdf</ref>
|
|
|-
|[[Magnesium]]
|26
|78
|-
|[[Mercury (element)|Mercury]]
|61~
|182<ref name="thermex2" />
|-
|[[Molybdenum]]
|4.8
|14.4
|-
|[[Nickel]]
|13
|39
|-
|[[Oak]] (perpendicular to the grain)
|54 <ref>[http://www.forestry.caf.wvu.edu/programs/woodindustries/wdsc340_7.htm WDSC 340. Class Notes on Thermal Properties of Wood<!-- Bot generated title -->]</ref>
|162
|-
|[[Pine]] (perpendicular to the grain)
|34
|102
|-
|-
|[[Platinum]]
|[[Platinum]]
Line 214: Line 218:
|27
|27
|-
|-
|[[Glass]]
|[[PVC]]
|8.5
|52
|156
|25.5
|-
|-
|[[Quartz]] ([[Fused quartz|fused]])
|[[Gallium(III) arsenide]]
|5.8
|0.59
|17.4
|1.77
|-
|[[Rubber]]
|77
|231
|-
|-
|[[Sapphire]] (parallel to C axis, or [001])
|[[Sapphire]] (parallel to C axis, or [001])
Line 226: Line 234:
|
|
|-
|-
|[[Molybdenum]]
|[[Silicon Carbide]]
|2.77 <ref>[http://www.ioffe.rssi.ru/SVA/NSM/Semicond/SiC/basic.html Basic Parameters of Silicon Carbide (SiC)<!-- Bot generated title -->]</ref>
|4.8
|14.4
|8.31
|-
|[[Indium phosphide]]
|4.6
|13.8
|-
|[[Tungsten]]
|4.5
|13.5
|-
|[[Glass]], [[borosilicate]]
|3.3
|9.9
|-
|-
|[[Silicon]]
|[[Silicon]]
Line 246: Line 242:
|9
|9
|-
|-
|[[Silicon Carbide]]
|[[Silver]]
|2.77 <ref>[http://www.ioffe.rssi.ru/SVA/NSM/Semicond/SiC/basic.html Basic Parameters of Silicon Carbide (SiC)<!-- Bot generated title -->]</ref>
|18<ref>[http://hyperphysics.phy-astr.gsu.edu/hbase/tables/thexp.html#c1 Thermal Expansion Coefficients<!-- Bot generated title -->]</ref>
|54
|8.31
|-
|-
|[[Invar]]
|[[Stainless steel]]
|1.2
|17.3
|3.6
|51.9
|-
|-
|[[Steel]], depends on composition
|[[Diamond]]
|11.0 ~ 13.0
|1
|33.0 ~ 39.0
|3
|-
|-
|[[Tungsten]]
|[[Quartz]] ([[Fused quartz|fused]])
|0.59
|4.5
|1.77
|13.5
|-
|[[Water]]
|69~
|207<ref name="thermex2">[http://www.efunda.com/materials/common_matl/Common_Matl.cfm?MatlPhase=Liquid&MatlProp=Thermal Properties of Common Liquid Materials<!-- Bot generated title -->]</ref>

|}
|}



Revision as of 13:42, 26 June 2010

Template:Material properties (thermodynamics)

All materials change their size when subjected to a temperature change as long as the pressure is held constant. In the special case of solid materials, the pressure does not appreciably affect the size of an object, and so for solids, it usually not necessary to specify that the pressure be held constant. The coefficient of thermal expansion describes how the size of an object changes with a change in temperature. Specifically, it measures the fractional change in volume per degree change in temperature at a constant pressure.

The volumetric thermal expansion coefficient is the most basic thermal expansion coefficient. All substances expand or contract when their temperature changes, and the expansion or contraction always occurs in all directions. Substances that expand at the same rate in any direction are called isotropic. Unlike gases or liquids, solid materials tend to keep their shape. For solids, one might only be concerned with the change along a length, or over some area. Expansion coefficients are specially defined for these cases, and they are known as the linear and area expansion coefficients. However, they all come from the volume expansion coefficient, which explains how the substance expands in any direction.

Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients.

The volumetric thermal expansion coefficient for solids

The thermal expansion coefficient for a solid is a thermodynamic property of that solid. For a solid, we can ignore the effects of pressure on the material and the volumetric thermal expansion coefficient can be written [1]:

where V is the volume of the material, and is the rate of change of that volume with temperature.

What this basically means is that the volume of a material changes by some fixed fractional amount. For example, a steel block with a volume of 1 cubic foot might expand to 1.02 cubic feet when the temperature is raised by 50 degrees. This is an expansion of two percent. If we had a block of steel with a volume of 2 cubic feet, then under the same conditions, it would expand to 2.04 cubic feet, again an expansion of two percent. The volumetric expansion coefficient would be two percent for 50 degrees or 0.04 percent per degree, or 0.0004 per degree.

If we already know the expansion coefficient, then we can calculate the change in volume

where is the fractional change in volume (0.02) and is the change in temperature (50 degrees).

The above example assumes that the expansion coefficient did not change as the temperature changed by 50 degrees. This is not always true, but for small changes in temperature, it is a good approximation. If the volumetric expansion coefficient does change appreciably with temperature, then the above equation will have to be integrated:

where is the starting temperature and is the volumetric expansion coefficient as a function of temperature T.

Linear thermal expansion coefficient for a solid

The linear thermal expansion coefficient relates the change in a material's linear dimensions to a change in temperature. It is the fractional change in length per degree of temperature change. Again, ignoring pressure, we may write:

where L is the linear dimension (e.g. length) and is the rate of change of that linear dimension per unit change in temperature. Just as with the volumetric coefficient, the change in the linear dimension can be estimated as:

Again, this equation works well as long as the linear expansion coefficient does not change much over the change in temperature . If it does, the equation must be integrated.

For exactly isotropic materials, the linear thermal expansion coefficient is almost exactly one third the volumetric coefficient.

This ratio arises because volume is composed of three mutually orthogonal directions. Thus, in an isotropic material, one-third of the volumetric expansion is in a single axis (a very close approximation for small differential changes). As an example, take a cube of steel that has sides of length L. The original volume will be and the new volume, after a temperature increase, will be

We can make the substitutions and, for isotropic materials, . We now have:

Since the volumetric and linear coefficients are defined only for extremely small temperature and dimensional changes, the last two terms can be ignored and we get the above relationship between the two coefficients. If we are trying go back and forth between volumetric and linear coefficients using larger values of then we will need to take into account the third term, and sometimes even the fourth term.

Area thermal expansion coefficient for a solid

The area thermal expansion coefficient relates the change in a material's area dimensions to a change in temperature. It is the fractional change in area per degree of temperature change. Again, ignoring pressure, we may write:

where A is some area on the object, and is the rate of change of that area per unit change in temperature. Just as with the volumetric coefficient, the change in the linear dimension can be estimated as:

Again, this equation works well as long as the linear expansion coefficient does not change much over the change in temperature . If it does, the equation must be integrated.

For exactly isotropic materials, the area thermal expansion coefficient is 2/3 of the volumetric coefficient.

This ratio can be found in a way similar to that in the linear example above, noting that the area of a face on the cube is just . Also, the same considerations must be made when dealing with large values of

The general volumetric thermal expansion coefficient

In the general case of a gas, liquid, or solid, the coefficient of thermal expansion is given by

where partial derivatives must now be used, the subscript p indicating that the pressure is held constant during the expansion. In the case of a gas, the fact that the pressure is held constant is important, because the volume of a gas will vary appreciably with pressure as well as temperature. For a gas of low density this can be seen from the ideal gas law. For exactly isotropic materials, the volumetric thermal expansion coefficient is 3 times the linear expansion coefficient.

Anisotropic materials

In anisotropic materials the total volumetric expansion is distributed unequally among the three axes and if the crystal symmetry is monoclinic or triclinic even the angles between these axes are subject to thermal changes. In such cases it is necessary to treat thermal expansion as a tensor that has up to six independent elements. A good way to determine the elements of the tensor is to study the expansion by powder diffraction.

Thermal expansion coefficients for various materials

The expansion and contraction of material must be considered when designing large structures, when using tape or chain to measure distances for land surveys, when designing molds for casting hot material, and in other engineering applications when large changes in dimension due to temperature are expected. The range for α is from 10−7/°C for hard solids to 10−3/°C for organic liquids. α varies with the temperature and some materials have a very high variation.

Theoretically, the coefficient of linear expansion can be approximated from the coefficient of volumetric expansion (β≈3α). However, for liquids, α is calculated through the experimental determination of β, so it is more accurate to state β here, rather than α. (The formula β≈3α is usually used for solids.)[2]

material coefficient of linear thermal expansion α
α in 10−6/C° at 20 °C
coefficient of volumetric thermal expansion β
β(≈3α) in 10−6/C° at 20 °C
Aluminium 23 69
Benzocyclobutene 42 126
Brass 19 57
Carbon steel 10.8 32.4
Concrete 12 36
Copper 17 51
Diamond 1 3
Ethanol 250~ 750[3]
Gallium(III) arsenide 5.8 17.4
Gasoline 317~ 950[2]
Glass 8.5 25.5
Glass, borosilicate 3.3 9.9
Gold 14 42
Indium phosphide 4.6 13.8
Invar 1.2 3.6
Iron 11.1 33.3
Lead 29 87
MACOR 9.3[4]
Magnesium 26 78
Mercury 61~ 182[5]
Molybdenum 4.8 14.4
Nickel 13 39
Oak (perpendicular to the grain) 54 [6] 162
Pine (perpendicular to the grain) 34 102
Platinum 9 27
PVC 52 156
Quartz (fused) 0.59 1.77
Rubber 77 231
Sapphire (parallel to C axis, or [001]) 5.3[7]
Silicon Carbide 2.77 [8] 8.31
Silicon 3 9
Silver 18[9] 54
Stainless steel 17.3 51.9
Steel, depends on composition 11.0 ~ 13.0 33.0 ~ 39.0
Tungsten 4.5 13.5
Water 69~ 207[5]

Applications

For applications using the thermal expansion property, see bi-metal and mercury thermometer.

Thermal expansion is also used in mechanical applications to fit parts over one another, e.g. a bushing can be fitted over a shaft by making its inner diameter slightly smaller than the diameter of the shaft, then heating it until it fits over the shaft, and allowing it to cool after it has been pushed over the shaft, thus achieving a 'shrink fit'. Induction shrink fitting is a common industrial method to pre-heat metal components between 150 °C and 300 °C thereby causing them to expand and allow for the insertion or removal of another component.

There exist some alloys with a very small linear expansion coefficient, used in applications that demand very small changes in physical dimension over a range of temperatures. One of these is Invar 36, with α approximately equal to 0.6×10−6/°C. These alloys are useful in aerospace applications where wide temperature swings may occur.

Pullinger's apparatus is used to determine linear expansion of a metallic rod in laboratory. The apparatus consists of a metal cylinder closed at both ends (called steam jacket). It is provided with an inlet and outlet for the steam.The steam for heating the rod is supplied by a boiler which is connected by a rubber tube to the inlet. The center of cylinder contains a hole to insert a thermometer. The rod, under investigation, is enclosed in a steam jacket. Its one end is free, but the second end is pressed against a fixed screw. The position of the rod is determined by a micrometer screw gauge or spherometer.

The control of thermal expansion in ceramics is a key concern for a wide range of reasons. For example, ceramics are brittle and cannot tolerate sudden changes in temperature (without cracking) if their expansion is too high. Ceramics need to be joined or work in consort with a wide range of materials and therefore their expansion must be matched to the application. Because glazes need to be firmly attached to the underlying porcelain (or other body type) their thermal expansion must be tuned to 'fit' the body so that crazing or shivering do not occur. Good example of products whose thermal expansion is the key to their success are CorningWare and the spark plug. The thermal expansion of ceramic bodies can be controlled by firing to create crystalline species that will influence the overall expansion of the material in the desired direction. In addition or instead the formulation of the body can employ materials delivering particles of the desired expansion to the matrix. The thermal expansion of glazes is controlled by their ceramic chemistry. In most cases there are complex issues involved in controlling body and glaze expansion, adjusting for thermal expansion must be done with an eye to other properties that will be affected, generally trade-offs are required.

See also

Notes and references

  1. ^ Turcotte, Donald L. (2002). Geodynamics (2nd Edition ed.). Cambridge. ISBN 0-521-66624-4. {{cite book}}: |edition= has extra text (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)
  2. ^ a b Thermal Expansion
  3. ^ Textbook: Young and Geller College Physics, 8e
  4. ^ http://www.corning.com/docs/specialtymaterials/pisheets/Macor.pdf
  5. ^ a b Properties of Common Liquid Materials
  6. ^ WDSC 340. Class Notes on Thermal Properties of Wood
  7. ^ http://americas.kyocera.com/kicc/pdf/Kyocera%20Sapphire.pdf
  8. ^ Basic Parameters of Silicon Carbide (SiC)
  9. ^ Thermal Expansion Coefficients