Spray (mathematics): Difference between revisions
m autagging + genfixes, added Empty section (2) tag using AWB (6876) |
|||
Line 1: | Line 1: | ||
In [[differential geometry]], a '''spray''' is a [[vector field]] ''H'' on the [[tangent bundle]] ''TM'' that encodes a quasilinear second order system of ordinary differential equations on the base manifold ''M''. Usually a spray is required to be homogeneous in the sense that its integral curves ''t'' |
In [[differential geometry]], a '''spray''' is a [[vector field]] ''H'' on the [[tangent bundle]] ''TM'' that encodes a quasilinear second order system of ordinary differential equations on the base manifold ''M''. Usually a spray is required to be homogeneous in the sense that its integral curves ''t''→Φ<sub>H</sub><sup>t</sup>(ξ)∈''TM''\0 obey the rule Φ<sub>H</sub><sup>t</sup>(λξ)=Φ<sub>H</sub><sup>λt</sup>(ξ) in positive reparameterizations. If this requirement is dropped, ''H'' is called a '''semispray'''. |
||
Sprays arise naturally in [[Riemannian geometry|Riemannian]] and [[Finsler geometry]] as the [[geodesic spray]]s, whose [[integral curve]]s are precisely the tangent curves of locally length minimizing curves. |
Sprays arise naturally in [[Riemannian geometry|Riemannian]] and [[Finsler geometry]] as the [[geodesic spray]]s, whose [[integral curve]]s are precisely the tangent curves of locally length minimizing curves. |
||
Line 6: | Line 6: | ||
== Formal definitions == |
== Formal definitions == |
||
Let ''M'' be a [[differentiable manifold]] and (''TM'', |
Let ''M'' be a [[differentiable manifold]] and (''TM'',π<sub>''TM''</sub>,''M'') its tangent bundle. Then a vector field ''H'' on ''TM'' (that is, a section of the [[double tangent bundle]] ''TTM'') is a '''semispray''' on ''M'', if any of the three following equivalent conditions holds: |
||
* ( |
* (π<sub>''TM''</sub>)<sub>*</sub>''H''<sub>ξ</sub> = ξ. |
||
* ''JH''=''V'', where ''J'' is the tangent structure on ''TM'' and ''V'' is the canonical vector field on ''TM''\0. |
* ''JH''=''V'', where ''J'' is the tangent structure on ''TM'' and ''V'' is the canonical vector field on ''TM''\0. |
||
* ''j''∘''H''=''H'', where ''j'':''TTM'' |
* ''j''∘''H''=''H'', where ''j'':''TTM''→''TTM'' is the canonical flip and ''H'' is seen as a mapping ''TM''→''TTM''. |
||
A semispray ''H'' on ''M'' is a '''(full) spray''' if any of the following equivalent conditions hold: |
A semispray ''H'' on ''M'' is a '''(full) spray''' if any of the following equivalent conditions hold: |
||
* ''H''<sub> |
* ''H''<sub>λξ</sub> = λ<sub>*</sub>(λ''H''<sub>ξ</sub>), where λ<sub>*</sub>:''TTM''→''TTM'' is the push-forward of the multiplication λ:''TM''→''TM'' by positive scalar λ>0. |
||
* The Lie-derivative of ''H'' along the canonical vector field ''V'' satisfies [''V'',''H'']=''H''. |
* The Lie-derivative of ''H'' along the canonical vector field ''V'' satisfies [''V'',''H'']=''H''. |
||
* The integral curves ''t'' |
* The integral curves ''t''→Φ<sub>H</sub><sup>t</sup>(ξ)∈''TM''\0 of ''H'' satisfy Φ<sub>H</sub><sup>t</sup>(λξ)=Φ<sub>H</sub><sup>λt</sup>(ξ) for any λ>0. |
||
Let (''x''<sup>''i''</sup>, |
Let (''x''<sup>''i''</sup>,ξ<sup>''i''</sup>) be the local coordinates on ''TM'' associated with the local coordinates (''x''<sup>''i''</sup>) on ''M'' using the coordinate basis on each tangent space. Then ''H'' is a semispray on ''M'' if and only if it has a local representation of the form |
||
:<math> H_\xi = \xi^i\frac{\partial}{\partial x^i}\Big|_{(x,\xi)} - 2G^i(x,\xi)\frac{\partial}{\partial \xi^i}\Big|_{(x,\xi)}. </math> |
:<math> H_\xi = \xi^i\frac{\partial}{\partial x^i}\Big|_{(x,\xi)} - 2G^i(x,\xi)\frac{\partial}{\partial \xi^i}\Big|_{(x,\xi)}. </math> |
||
on each associated coordinate system on ''TM''. The semispray ''H'' is a (full) spray, if and only if the '''spray coefficients''' ''G''<sup>''i''</sup> satisfy |
on each associated coordinate system on ''TM''. The semispray ''H'' is a (full) spray, if and only if the '''spray coefficients''' ''G''<sup>''i''</sup> satisfy |
||
Line 22: | Line 22: | ||
== Semisprays in Lagrangian mechanics == |
== Semisprays in Lagrangian mechanics == |
||
A physical system is modeled in Lagrangian mechanics by a Lagrangian function ''L'':''TM'' |
A physical system is modeled in Lagrangian mechanics by a Lagrangian function ''L'':''TM''→'''R''' on the tangent bundle of some configuration space ''M''. The dynamical law is the obtained from the Hamiltonian principle, which states that the time evolution γ:[''a'',''b'']→''M'' of the state of the system is stationary for the action integral |
||
:<math>\mathcal S(\gamma) := \int_a^b L(\gamma(t),\dot\gamma(t))dt</math>. |
:<math>\mathcal S(\gamma) := \int_a^b L(\gamma(t),\dot\gamma(t))dt</math>. |
||
In the associated coordinates on ''TM'' the first variation of the action integral reads as |
In the associated coordinates on ''TM'' the first variation of the action integral reads as |
||
Line 29: | Line 29: | ||
+ \frac{\partial^2 L}{\partial x^j\partial\xi^i} \dot\gamma^j - \frac{\partial L}{\partial x^i} \Big) X^i dt, |
+ \frac{\partial^2 L}{\partial x^j\partial\xi^i} \dot\gamma^j - \frac{\partial L}{\partial x^i} \Big) X^i dt, |
||
</math> |
</math> |
||
where ''X'':[''a'',''b''] |
where ''X'':[''a'',''b'']→'''R''' is the variation vector field associated with the variation γ<sub>''s''</sub>:[''a'',''b'']→''M'' around γ(''t'') = γ<sub>0</sub>(''t''). This first variation formula can be recast in a more informative form by introducing the following concepts: |
||
* The covector <math>\alpha_\xi = \alpha_i(x,\xi) dx^i|_x\in T_x^*M</math> with <math>\alpha_i(x,\xi) = \tfrac{\partial L}{\partial \xi^i}(x,\xi)</math> is the '''conjugate momentum''' of <math>\xi \in T_xM </math>. |
* The covector <math>\alpha_\xi = \alpha_i(x,\xi) dx^i|_x\in T_x^*M</math> with <math>\alpha_i(x,\xi) = \tfrac{\partial L}{\partial \xi^i}(x,\xi)</math> is the '''conjugate momentum''' of <math>\xi \in T_xM </math>. |
||
* The corresponding one-form <math>\alpha\in\Omega^1(TM)</math> with <math>\alpha_\xi = \alpha_i(x,\xi) dx^i|_{(x,\xi)}\in T^*_\xi TM</math> is the '''Hilbert-form''' associated with the Lagrangian. |
* The corresponding one-form <math>\alpha\in\Omega^1(TM)</math> with <math>\alpha_\xi = \alpha_i(x,\xi) dx^i|_{(x,\xi)}\in T^*_\xi TM</math> is the '''Hilbert-form''' associated with the Lagrangian. |
||
* The bilinear form <math>g_\xi = g_{ij}(x,\xi)(dx^i\otimes dx^j)|_x</math> with <math>g_{ij}(x,\xi) = \tfrac{\partial^2 L}{\partial \xi^i \partial \xi^j}(x,\xi)</math> is the '''fundamental tensor''' of the Lagrangian at <math>\xi \in T_xM </math>. |
* The bilinear form <math>g_\xi = g_{ij}(x,\xi)(dx^i\otimes dx^j)|_x</math> with <math>g_{ij}(x,\xi) = \tfrac{\partial^2 L}{\partial \xi^i \partial \xi^j}(x,\xi)</math> is the '''fundamental tensor''' of the Lagrangian at <math>\xi \in T_xM </math>. |
||
* The Lagrangian satisfies the '''Legendre condition''' if the fundamental tensor ''g''<sub> |
* The Lagrangian satisfies the '''Legendre condition''' if the fundamental tensor ''g''<sub>ξ</sub> is non-degenerate at every <math>\xi \in T_xM </math>. Then the inverse matrix of ''g''<sub>''ij''</sub> is denoted by ''g''<sup>''ij''</sup> |
||
* The '''Energy''' associated with the Lagrangian is <math>E(\xi) = \alpha_\xi(\xi) - L(\xi)</math>. |
* The '''Energy''' associated with the Lagrangian is <math>E(\xi) = \alpha_\xi(\xi) - L(\xi)</math>. |
||
If the Legendre condition is satisfied, then ''d'' |
If the Legendre condition is satisfied, then ''d''α∈Ω<sup>2</sup>(''TM'') is a [[symplectic form]], and there exists a unique [[Hamiltonian vector field]] ''H'' on ''TM'' corresponding to the Hamiltonian function ''E'' such that |
||
<math> dE = - \iota_H d\alpha</math>. Let (''X''<sup>''i''</sup>,''Y''<sup>''i''</sup>) be the components of the Hamiltonian vector field ''H'' in the associated coordinates on ''TM''. Then |
<math> dE = - \iota_H d\alpha</math>. Let (''X''<sup>''i''</sup>,''Y''<sup>''i''</sup>) be the components of the Hamiltonian vector field ''H'' in the associated coordinates on ''TM''. Then |
||
:<math> \iota_H d\alpha = Y^i \frac{\partial^2 L}{\partial\xi^i\partial x^j} dx^j - X^i \frac{\partial^2 L}{\partial\xi^i\partial x^j} d\xi^j </math> |
:<math> \iota_H d\alpha = Y^i \frac{\partial^2 L}{\partial\xi^i\partial x^j} dx^j - X^i \frac{\partial^2 L}{\partial\xi^i\partial x^j} d\xi^j </math> |
||
Line 49: | Line 49: | ||
= \Big|_a^b \alpha_i X^i - \int_a^b g_{ik}(\ddot\gamma^k+2G^k)X^i dt, |
= \Big|_a^b \alpha_i X^i - \int_a^b g_{ik}(\ddot\gamma^k+2G^k)X^i dt, |
||
</math> |
</math> |
||
and we see |
and we see γ[''a'',''b'']→''M'' is stationary for the action integral with fixed end points if and only if its tangent curve γ':[''a'',''b'']→''TM'' is an integral curve for the Hamiltonian vector field ''H''. Hence the dynamics of mechanical systems are described by semisprays arising from action integrals. |
||
== Geodesic spray == |
== Geodesic spray == |
||
Line 55: | Line 55: | ||
The locally length minimizing curves of [[Riemannian manifold|Riemannian]] and [[Finsler manifold]]s are called [[geodesics]]. Using the framework of Lagrangian mechanics one can describe these curves with spray structures. Define a Lagrangian function on ''TM'' by |
The locally length minimizing curves of [[Riemannian manifold|Riemannian]] and [[Finsler manifold]]s are called [[geodesics]]. Using the framework of Lagrangian mechanics one can describe these curves with spray structures. Define a Lagrangian function on ''TM'' by |
||
:<math>L(x,\xi) = \tfrac{1}{2}F^2(x,\xi),</math> |
:<math>L(x,\xi) = \tfrac{1}{2}F^2(x,\xi),</math> |
||
where ''F'':''TM'' |
where ''F'':''TM''→'''R''' is the [[Finsler manifold|Finsler function]]. In the Riemannian case one uses ''F''<sup>2</sup>(''x'',ξ) = ''g''<sub>''ij''</sub>(''x'')ξ<sup>''i''</sup>ξ<sup>''j''</sup>. Now introduce the concepts from the section above. In the Riemannian case it turns out that the fundamental tensor ''g''<sub>''ij''</sub>(''x'',ξ) is simply the Riemannian metric ''g''<sub>''ij''</sub>(''x''). In the general case the homogeneity condition |
||
:<math>F(x,\lambda\xi) = \lambda F(x,\xi), \quad \lambda>0</math> |
:<math>F(x,\lambda\xi) = \lambda F(x,\xi), \quad \lambda>0</math> |
||
of the Finsler-function implies the following formulae: |
of the Finsler-function implies the following formulae: |
||
Line 63: | Line 63: | ||
G^i(x,\lambda\xi) = \lambda^2 G^i(x,\xi), </math> |
G^i(x,\lambda\xi) = \lambda^2 G^i(x,\xi), </math> |
||
of which the last one says that the Hamiltonian vector field ''H'' for this mechanical system is a full spray. The constant speed geodesics of the underlying Finsler (or Riemannian) manifold are described by this spray for the following reasons: |
of which the last one says that the Hamiltonian vector field ''H'' for this mechanical system is a full spray. The constant speed geodesics of the underlying Finsler (or Riemannian) manifold are described by this spray for the following reasons: |
||
* Since ''g''<sub> |
* Since ''g''<sub>ξ</sub> is positive definite for Finsler spaces, every short enough stationary curve for the length functional is length minimizing. |
||
* Every stationary curve for the action integral is of constant speed <math>F(\gamma(t),\dot\gamma(t))=\lambda</math>, since the energy is automatically a constant of motion. |
* Every stationary curve for the action integral is of constant speed <math>F(\gamma(t),\dot\gamma(t))=\lambda</math>, since the energy is automatically a constant of motion. |
||
* For any curve <math>\gamma:[a,b]\to M</math> of constant speed the action integral and the length functional are related by |
* For any curve <math>\gamma:[a,b]\to M</math> of constant speed the action integral and the length functional are related by |
||
:<math> \mathcal S(\gamma) = \frac{(b-a)\lambda^2}{2} = \frac{\ell(\gamma)^2}{2(b-a)}. </math> |
:<math> \mathcal S(\gamma) = \frac{(b-a)\lambda^2}{2} = \frac{\ell(\gamma)^2}{2(b-a)}. </math> |
||
Therefore a curve <math>\gamma:[a,b]\to M</math> is stationary to the action integral if and only if it is of constant speed and stationary to the length functional. The Hamiltonian vector field ''H'' is called the '''geodesic spray''' of the Finsler manifold (''M'',''F'') and the corresponding flow |
Therefore a curve <math>\gamma:[a,b]\to M</math> is stationary to the action integral if and only if it is of constant speed and stationary to the length functional. The Hamiltonian vector field ''H'' is called the '''geodesic spray''' of the Finsler manifold (''M'',''F'') and the corresponding flow Φ<sub>''H''</sub><sup>t</sup>(ξ) is called the '''geodesic flow'''. |
||
== Correspondence with nonlinear connections == |
== Correspondence with nonlinear connections == |
||
{{Empty section|date=July 2010}} |
|||
== Jacobi-fields of sprays and semisprays == |
== Jacobi-fields of sprays and semisprays == |
||
{{Empty section|date=July 2010}} |
|||
==References== |
==References== |
||
Line 79: | Line 81: | ||
* {{citation|first=Shlomo|last=Sternberg|title=Lectures on Differential Geometry|year=1964|publisher=Prentice-Hall}}. |
* {{citation|first=Shlomo|last=Sternberg|title=Lectures on Differential Geometry|year=1964|publisher=Prentice-Hall}}. |
||
* {{citation|first=Serge|last=Lang|title=Fundamentals of Differential Geometry|year=1999|publisher=Springer-Verlag}}. |
* {{citation|first=Serge|last=Lang|title=Fundamentals of Differential Geometry|year=1999|publisher=Springer-Verlag}}. |
||
[[Category:Differential geometry]] |
[[Category:Differential geometry]] |
Revision as of 03:02, 26 July 2010
In differential geometry, a spray is a vector field H on the tangent bundle TM that encodes a quasilinear second order system of ordinary differential equations on the base manifold M. Usually a spray is required to be homogeneous in the sense that its integral curves t→ΦHt(ξ)∈TM\0 obey the rule ΦHt(λξ)=ΦHλt(ξ) in positive reparameterizations. If this requirement is dropped, H is called a semispray.
Sprays arise naturally in Riemannian and Finsler geometry as the geodesic sprays, whose integral curves are precisely the tangent curves of locally length minimizing curves. Semisprays arise naturally as the extremal curves of action integrals in Lagrangian mechanics. Generalizing all these examples, any (possibly nonlinear) connection on M induces a semispray H, and conversely, any semispray H induces a torsion-free nonlinear connection on M. If the original connection is torsion-free it coincides with the connection induced by H, and homogeneous torsion-free connections are in one-to-one correspondence with full sprays[1].
Formal definitions
Let M be a differentiable manifold and (TM,πTM,M) its tangent bundle. Then a vector field H on TM (that is, a section of the double tangent bundle TTM) is a semispray on M, if any of the three following equivalent conditions holds:
- (πTM)*Hξ = ξ.
- JH=V, where J is the tangent structure on TM and V is the canonical vector field on TM\0.
- j∘H=H, where j:TTM→TTM is the canonical flip and H is seen as a mapping TM→TTM.
A semispray H on M is a (full) spray if any of the following equivalent conditions hold:
- Hλξ = λ*(λHξ), where λ*:TTM→TTM is the push-forward of the multiplication λ:TM→TM by positive scalar λ>0.
- The Lie-derivative of H along the canonical vector field V satisfies [V,H]=H.
- The integral curves t→ΦHt(ξ)∈TM\0 of H satisfy ΦHt(λξ)=ΦHλt(ξ) for any λ>0.
Let (xi,ξi) be the local coordinates on TM associated with the local coordinates (xi) on M using the coordinate basis on each tangent space. Then H is a semispray on M if and only if it has a local representation of the form
on each associated coordinate system on TM. The semispray H is a (full) spray, if and only if the spray coefficients Gi satisfy
Semisprays in Lagrangian mechanics
A physical system is modeled in Lagrangian mechanics by a Lagrangian function L:TM→R on the tangent bundle of some configuration space M. The dynamical law is the obtained from the Hamiltonian principle, which states that the time evolution γ:[a,b]→M of the state of the system is stationary for the action integral
- .
In the associated coordinates on TM the first variation of the action integral reads as
where X:[a,b]→R is the variation vector field associated with the variation γs:[a,b]→M around γ(t) = γ0(t). This first variation formula can be recast in a more informative form by introducing the following concepts:
- The covector with is the conjugate momentum of .
- The corresponding one-form with is the Hilbert-form associated with the Lagrangian.
- The bilinear form with is the fundamental tensor of the Lagrangian at .
- The Lagrangian satisfies the Legendre condition if the fundamental tensor gξ is non-degenerate at every . Then the inverse matrix of gij is denoted by gij
- The Energy associated with the Lagrangian is .
If the Legendre condition is satisfied, then dα∈Ω2(TM) is a symplectic form, and there exists a unique Hamiltonian vector field H on TM corresponding to the Hamiltonian function E such that . Let (Xi,Yi) be the components of the Hamiltonian vector field H in the associated coordinates on TM. Then
and
so we see that the Hamiltonian vector field H is a semispray on the configuration space M with the spray coefficients
Now the first variational formula can be rewritten as
and we see γ[a,b]→M is stationary for the action integral with fixed end points if and only if its tangent curve γ':[a,b]→TM is an integral curve for the Hamiltonian vector field H. Hence the dynamics of mechanical systems are described by semisprays arising from action integrals.
Geodesic spray
The locally length minimizing curves of Riemannian and Finsler manifolds are called geodesics. Using the framework of Lagrangian mechanics one can describe these curves with spray structures. Define a Lagrangian function on TM by
where F:TM→R is the Finsler function. In the Riemannian case one uses F2(x,ξ) = gij(x)ξiξj. Now introduce the concepts from the section above. In the Riemannian case it turns out that the fundamental tensor gij(x,ξ) is simply the Riemannian metric gij(x). In the general case the homogeneity condition
of the Finsler-function implies the following formulae:
In terms of classical mechanical the last equation states that all the energy in the system (M,L) is in the kinetic form. Furthermore, one obtains the homogeneity properties
of which the last one says that the Hamiltonian vector field H for this mechanical system is a full spray. The constant speed geodesics of the underlying Finsler (or Riemannian) manifold are described by this spray for the following reasons:
- Since gξ is positive definite for Finsler spaces, every short enough stationary curve for the length functional is length minimizing.
- Every stationary curve for the action integral is of constant speed , since the energy is automatically a constant of motion.
- For any curve of constant speed the action integral and the length functional are related by
Therefore a curve is stationary to the action integral if and only if it is of constant speed and stationary to the length functional. The Hamiltonian vector field H is called the geodesic spray of the Finsler manifold (M,F) and the corresponding flow ΦHt(ξ) is called the geodesic flow.
Correspondence with nonlinear connections
This section is empty. You can help by adding to it. (July 2010) |
Jacobi-fields of sprays and semisprays
This section is empty. You can help by adding to it. (July 2010) |
References
- ^ I.Bucataru, R.Miron, Finsler-Lagrange Geometry, Editura Academiei Române, 2007.
- Sternberg, Shlomo (1964), Lectures on Differential Geometry, Prentice-Hall.
- Lang, Serge (1999), Fundamentals of Differential Geometry, Springer-Verlag.