Utah State Route 280: Difference between revisions
m changes to infobox road broke the link to the "next" article in the browse. This is probably the easiest fix. |
|||
| Line 5: | Line 5: | ||
|route=280 |
|route=280 |
||
|section=133 |
|section=133 |
||
|maint=[[UDOT]] |
|||
|map= |
|map= |
||
|length_mi=0.399 |
|length_mi=0.399 |
||
Revision as of 19:16, 21 December 2010
 State Route 280 | ||||
|---|---|---|---|---|
| 100 South | ||||
| Route information | ||||
| Maintained by UDOT | ||||
| Length | 0.399 mi[1] (642 m) | |||
| Existed | 1961–present | |||
| Major junctions | ||||
| West end |   I-80 / US 189 in Coalville | |||
| East end | Main Street in Coalville | |||
| Location | ||||
| Country | United States | |||
| State | Utah | |||
| Highway system | ||||
| ||||
| ||||
State Route 280 is a state highway completely within Summit County in the northern portion of the U.S. state of Utah connecting I-80 in Coalville to Main Street in the same town in a span of 0.39 miles (0.63 km). The entirety of the highway is named 100 South.
Route description
The highway begins at a diamond interchange on I-80 at exit 162 west of the center of Coalville and heads northwest on a two-lane undivided highway. SR-280 enters downtown Coalville and terminates on Main Street.[2]
History
Prior to the construction of I-80, SR-4 (US-189) passed through Coalville on Main Street. To retain access to the town once I-80 replaced the surface road, the State Road Commission designated State Route 280 in 1961 as a short connection between I-80 and Main Street on Icy Springs Road (100 South).[3] Before serving its intended purpose, the road briefly formed part of SR-2 (which had replaced SR-4 in 1962) and US-189, since I-80 was completed west of SR-280 before the portion east to Echo opened. A temporary ramp left the right side of SR-280 where the ramp to I-80 east now begins, and curved left into the westbound lanes of I-80 just before the Interstate crosses under SR-280.[4]
Major intersections
| County | Location[5] | Mile[1] | Junction | Notes | |
|---|---|---|---|---|---|
| Summit | Coalville | 0.000 | 0.000 |   I-80 to I-84 – Park City, Ogden, Evanston | Western terminus |
| 0.399 | 0.642 | Main Street | Eastern terminus | ||
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
See also
List of state highways in the United States shorter than one mile
References
- ^ a b "State Route 280 Highway reference". Utah Department of Transportation.
- ^ "Google Maps". Google.
- ^ Utah Department of Transportation, Highway Resolutions: Template:PDFlink, updated December 2007, accessed May 2008
- ^ Google Maps street maps and USGS topographic maps, accessed May 2008 via ACME Mapper
- ^ "State Highway Map". Utah Department of Transportation. Retrieved 23 April 2008.