Obice da 210/22: Difference between revisions
Content deleted Content added
m Small correction and source |
mNo edit summary |
||
| Line 72: | Line 72: | ||
}} |
}} |
||
The '''Obice da 210/22 modello 35''' was a [[Italy|Italian]] heavy [[howitzer]] designed by the [[Italian Arms and Munitions Technical Service]] (STAM) and accepted into service by the [[Italian Army]] in 1938. A total of 346 were ordered and the gun was produced by |
The '''Obice da 210/22 modello 35''' was a [[Italy|Italian]] heavy [[howitzer]] designed by the [[Italian Arms and Munitions Technical Service]] (STAM) and accepted into service by the [[Italian Army]] in 1938. A total of 346 were ordered and the gun was produced by [[Italian Ansaldo company|Ansaldo]] at their [[Pozzuoli]] factory. However production was slow and approximately 20 were produced by 1942. After Italy surrendered Germany seized as many as they could and the factory in Northern Italy continued to produce guns for the German Army until the end of the war. The carriage was split trail with four wheels which raised from the ground for firing and the gun was trunnioned under the breech to allow for maximum recoil and elevation. |
||
==Derivatives and designations== |
==Derivatives and designations== |
||
Revision as of 22:04, 4 May 2011
| Obice da 210/22 modello 35 | |
|---|---|
| Type | Howitzer |
| Place of origin |  Italy |
| Service history | |
| Used by | Italy Nazi Germany Hungary |
| Wars | World War II |
| Production history | |
| Manufacturer | Ansaldo |
| Specifications | |
| Mass | 15,885 kg (35,020 lb) |
| Barrel length | 5 m (16 ft) L/23.8 |
| Caliber | 210 mm (8.3 in) |
| Recoil | hydro-pneumatic |
| Carriage | split trail |
| Elevation | 0° to +70° |
| Traverse | 75° |
| Muzzle velocity | 560 m/s (1,800 ft/s) |
| Maximum firing range | 15,400 m (16,800 yd) |
The Obice da 210/22 modello 35 was a Italian heavy howitzer designed by the Italian Arms and Munitions Technical Service (STAM) and accepted into service by the Italian Army in 1938. A total of 346 were ordered and the gun was produced by Ansaldo at their Pozzuoli factory. However production was slow and approximately 20 were produced by 1942. After Italy surrendered Germany seized as many as they could and the factory in Northern Italy continued to produce guns for the German Army until the end of the war. The carriage was split trail with four wheels which raised from the ground for firing and the gun was trunnioned under the breech to allow for maximum recoil and elevation.
Derivatives and designations
- 21 cm 39.M: Hungarian designation for guns purchased from Italy.
- 21 cm 40.M: Hungarian-produced version featuring carriage modifications.
- 21 cm 41.M: Final Hungarian-produced version which entered production in 1943.
- 21 cm Haubitze 520(i): German designation for modello 35s captured after the Italian surrender in 1943 and kept in production until the end of the war.
References
- Hogg, Ian Twentieth-Century Artillery. New York: Barnes & Nobles, 2000 ISBN 0-7607-1994-2