VTEC: Difference between revisions
No edit summary |
|||
Line 1: | Line 1: | ||
'''VTEC''' ('''Variable Valve Timing and |
'''VTEC''' ('''Variable Valve Timing and Electronic Lift Control''') is a [[valvetrain]] system developed by [[Honda]] to improve the volumetric efficiency of a [[four-stroke]] [[internal combustion engine]]. This system uses two camshaft profiles and electronically selects between the profiles. It was invented by Honda R&D engineer [[Ikuo Kajitani]]<ref name="1989vtecengine">{{cite web|url= http://world.honda.com/history/challenge/1989vtecengine/index.html |title= The VTEC Engine |year= |accessdate= 2011-03-11 |publisher= Honda Motor Co., Ltd. }}</ref>, and was the first system of its kind. Different types of variable valve timing and lift control systems have also been produced by other manufacturers (MIVEC from Mitsubishi, AVCS from [[Subaru]], VVTL-i from [[Toyota]], VarioCam Plus from [[Porsche]], VVC from [[Rover Group]], VVEL from [[Nissan]], etc.). |
||
== Context, and description == |
== Context, and description == |
Revision as of 13:25, 19 May 2011
VTEC (Variable Valve Timing and Electronic Lift Control) is a valvetrain system developed by Honda to improve the volumetric efficiency of a four-stroke internal combustion engine. This system uses two camshaft profiles and electronically selects between the profiles. It was invented by Honda R&D engineer Ikuo Kajitani[1], and was the first system of its kind. Different types of variable valve timing and lift control systems have also been produced by other manufacturers (MIVEC from Mitsubishi, AVCS from Subaru, VVTL-i from Toyota, VarioCam Plus from Porsche, VVC from Rover Group, VVEL from Nissan, etc.).
Context, and description
VTEC was initially designed to increase the power output of an engine to 100 PS/liter or more while maintaining practicality for use in mass production vehicles. Some later variations of the system were designed solely to provide improvements in fuel efficiency,. In practice, a fully variable valve timing engine is difficult to design and implement.
Additionally, Japan has a tax on engine displacement, requiring Japanese auto manufacturers to make higher-performing engines with lower displacement. In cars such as the Toyota Supra and Nissan 300ZX, this was accomplished with a turbocharger. In the case of the Mazda RX-7 and RX-8, a rotary engine was used. VTEC serves as yet another method to derive very high specific output (power/unit displacement) from smaller-displacement engines.
The VTEC system is a simple method of endowing the engine with multiple camshaft profiles optimized for low and high RPM operations. Instead of one cam lobe actuating each valve, there are two: one optimized for low-RPM stability & fuel efficiency; the other designed to maximize high-RPM power output. Switching between the two cam lobes is controlled by the ECU which takes account of engine oil pressure, engine temperature, vehicle speed, engine speed and throttle position. Using these inputs, the ECU is programmed to switch from the low lift to the high lift cam lobes when the conditions mean that engine output will be improved. At the switch point a solenoid is actuated which allows oil pressure from a spool valve to operate a locking pin which binds the high RPM cam follower to the low RPM ones. From this point on, the poppet valve opens and closes according to the high-lift profile, which opens the valve further and for a longer time. The switch-over point is variable, between a minimum and maximum point, and is determined by engine load. The switch back from high to low RPM cams is set to occur at a lower engine speed than the up-switch (hysteresis) to avoid a situation in which the engine is asked to operate continuously at or around the switch-over point.
The opposite approach to variable timing is to produce a camshaft which is better suited to high RPM operation. This approach means that the vehicle will run very poorly at low RPM (where most automobiles spend much of their time) and much better at high RPM. VTEC is the result of an effort to marry high RPM performance with low RPM stability.
History
VTEC, the original Honda variable valve control system, originated from REV (Revolution-modulated valve control) introduced on the CBR400 in 1983 known as HYPER VTEC. In the regular four-stroke automobile engine, the intake and exhaust valves are actuated by lobes on a camshaft. The shape of the lobes determines the timing, lift and duration of each valve. Timing refers to an angle measurement of when a valve is opened or closed with respect to the piston position (BTDC or ATDC). Lift refers to how much the valve is opened. Duration refers to how long the valve is kept open. Due to the behavior of the working fluid (air and fuel mixture) before and after combustion, which have physical limitations on their flow, as well as their interaction with the ignition spark, the optimal valve timing, lift and duration settings under low RPM engine operations are very different from those under high RPM. Optimal low RPM valve timing, lift and duration settings would result in insufficient filling of the cylinder with fuel and air at high RPM, thus greatly limiting engine power output. Conversely, optimal high RPM valve timing, lift and duration settings would result in very rough low RPM operation and difficult idling. The ideal engine would have fully variable valve timing, lift and duration, in which the valves would always open at exactly the right point, lift high enough and stay open just the right amount of time for the engine speed in use.
DOHC VTEC
Introduced as a DOHC system in the 1989 Honda Integra[1] which used a 160 bhp (120 kW) variant of the B16A engine (B16A1). The US market saw the first VTEC system with the introduction of the 1991 Acura NSX, which used a 3 liter DOHC VTEC V6 with 280 bhp (210 kW). DOHC VTEC engines soon appeared in other vehicles, such as the 1992 Acura Integra GS-R (B17A1 1.7 liter engine), and later in the 1992 Honda Prelude VTEC (H22A 2.2 liter engine with 195 hp) and Honda Del Sol VTEC (B16A2 1.6 liter engine). The Integra Type R (1997–2001) available in the Japanese market produces 200 bhp (149 kW; 203 PS) using a B18C5 1.8 liter engine. Honda has also continued to develop other varieties and today offers several varieties of VTEC, such as i-VTEC and i-VTEC Hybrid.
SOHC VTEC
As popularity and marketing value of the VTEC system grew, Honda applied the system to SOHC (Single Over Head Cam) engines, which share a common camshaft for both intake and exhaust valves. The trade-off was that Honda's SOHC engines only benefitted from the VTEC mechanism on the intake valves. This is because VTEC requires a third center rocker arm and cam lobe (for each intake and exhaust side), and in the SOHC engine, the spark plugs are situated between the two exhaust rocker arms, leaving no room for the VTEC rocker arm. Additionally, the center lobe on the camshaft can only be utilized by either the intake or the exhaust, limiting the VTEC feature to one side.
However, beginning with the J37A4 3.7L, SOHC V6 engine introduced on all 2009 Acura TL SH-AWD models, SOHC VTEC was incorporated for use with intake and exhaust valves. The intake and exhaust rocker shafts contain primary and secondary intake and exhaust rocker arms, respectively. The primary rocker arm contains the VTEC switching piston, while the secondary rocker arm contains the return spring. The term "primary" does not refer to which rocker arm forces the valve down during low-RPM engine operation. Rather, it refers to the rocker arm which contains the VTEC switching piston and receives oil from the rocker shaft.
The primary exhaust rocker arm contacts a low-profile camshaft lobe during low-RPM engine operation. Once VTEC engagement occurs, the oil pressure flowing from the exhaust rocker shaft into the primary exhaust rocker arm forces the VTEC switching piston into the secondary exhaust rocker arm, thus locking both exhaust rocker arms together. The high-profile camshaft lobe which normally contacts the secondary exhaust rocker arm alone during low-RPM engine operation is able to move both exhaust rocker arms together which are locked as a unit.
The secondary intake rocker arm contacts a low-profile camshaft lobe during low-RPM engine operation. Once VTEC engagement occurs, the oil pressure flowing from the intake rocker shaft into the primary intake rocker arm forces the VTEC switching piston into the secondary intake rocker arm, thus locking both intake rocker arms together. The high-profile camshaft lobe which normally contacts the primary intake rocker alone during low-RPM engine operation is able to move both intake rocker arms together which are locked as a unit.
The difficulty of incorporating VTEC for both the intake and exhaust valves in a SOHC engine has been removed on the J37A4 by a novel design of the intake rocker arm. Each exhaust valve on the J37A4 corresponds to one primary and one secondary exhaust rocker arm. Therefore, there are a total of twelve primary exhaust rocker arms and twelve secondary exhaust rocker arms.
However, each secondary intake rocker arm is shaped similar to a "Y" which allows it to contact two intake valves at once. One primary intake rocker arm corresponds to each secondary intake rocker arm. As a result of this design, there are only six primary intake rocker arms and six secondary intake rocker arms.
VTEC-E
It is a version of SOHC VTEC, which was used to increase efficiency at low RPM. At low RPM, one of the two intake valves is only allowed to open a very small amount, increasing the fuel/air atomization in the cylinder and thus allowing a leaner mixture to be used. As the engine's speed increases, both valves are needed to supply sufficient mixture. A sliding pin, which is pressured by oil, as in the regular VTEC, is used to connect both valves together and allows the full opening of the second valve.
3-Stage VTEC
It is a version of VTEC using 3 different cam profiles to control intake valve timing and lift. Due to this version of VTEC being on a SOHC valve head, space was limited and so VTEC can only modify the opening and closing of the intake valves. This version of VTEC combines the fuel economy benefits of VTEC-E and the performance of VTEC. From idle to 2500-3000RPM, depending on load conditions, one intake valve fully opens while the other just slightly, enough to prevent pooling of fuel behind the valve, also called 12 valve mode. This 12 Valve mode results in swirl of the intake charge which increases combustion efficiency resulting in improved low end torque and better fuel economy. At 3000-5400 RPM, depending on load, one of the VTEC solenoids engages which causes the 2nd valve (the one that barely opened before) to lock onto the first valve's camshaft lobe so now both valves share the same camshaft profile, with this mode also being called 4 valve mode, lending itself to improved mid-range power. At 5500-7000 RPM, the second VTEC solenoid engages (both solenoids now engaged) so that both intake valves are using a middle, third camshaft lobe. This camshaft lobe is a high performance lobe which is used to provide peak power at the top end of the RPM range.
i-VTEC
(intelligent-VTEC)[2] introduced continuously variable camshaft phasing on the intake cam of DOHC VTEC engines. The technology first appeared on Honda's K-series four cylinder engine family in 2001 (2002 in the U.S.). In the United States, Honda first debuted the technology on the 2002 Honda CR-V.
Valve lift and duration are still limited to distinct low- and high-RPM profiles, but the intake camshaft is now capable of advancing between 25 and 50 degrees (depending upon engine configuration) during operation. Phase changes are implemented by a computer controlled, oil driven adjustable cam gear. Phasing is determined by a combination of engine load and rpm, ranging from fully retarded at idle to somewhat advanced at full throttle and low RPM. The effect is further optimization of torque output, especially at low and midrange RPM.
K-series
The K-Series motors have two different types of i-VTEC systems implemented. The first is for the performance motors like in the RSX Type S or the Civic Si and the other is for economy motors found in the CR-V or Accord. The performance i-VTEC system is basically the same as the DOHC VTEC system of the B16A's; both intake and exhaust have 3 cam lobes per cylinder. However the valvetrain has the added benefit of roller rockers and continuously variable intake cam timing. Performance i-VTEC is a combination of conventional DOHC VTEC with VTC.
The economy i-VTEC is more like the SOHC VTEC-E in that the intake cam has only two lobes, one very small and one larger, as well as no VTEC on the exhaust cam. The two types of motor are easily distinguishable by the factory rated power output: the performance motors make around 200 hp (150 kW) or more in stock form and the economy motors do not make much more than 160 hp (120 kW) from the factory.
R-series
The new SOHC i-VTEC implementation is an entirely new implementation that was first introduced on the 2006 Honda Civic's R-series four cylinder SOHC engines. This implementation uses the so-called "fuel economy cam" and "high output cam" on one of the two intake valves of each cylinder (another intake valve is fixed). The "fuel economy cams" are designed to retard the closure of one intake valve and are activated between 1000-3500 RPM and under low load conditions. When "fuel economy cams" are activated, the intake valve closes well after the piston has started moving upwards in the compression stroke. During this time, the drive-by-wire throttle valve is open wider than normal. Due to the delayed closing of intake valve, a part of the intake mixture that has entered the combustion chamber is forced out again into the intake manifold. That way, the engine "emulates" a lower displacement than its actual one (its operation is also similar to an Atkinson cycle engine, with uneven compression and combustion strokes), which reduces pumping losses thus reducing fuel consumption and increases its efficiency. VTEC-off on the R18A means it can be considered to be running "high output cams". When the right conditions are achieved for fuel economy, VTEC engages the 2nd set, the 'low' or 'economy' cams. Thus VTEC-on on the R18A means it is running low cams.
According to Honda, this measure alone can reduce pumping losses by 16%. Under heavier loads, the engine switches back into its "high output cams", and it operates like a regular 4 stroke Otto cycle engine. This implementation of i-VTEC was initially introduced in the R18A1 engine found under the hood of the 8th generation Civic, with a displacement of 1.8 L and an output of 140 PS (100 kW; 140 hp). Recently, another variant was released, the 2.0 L R20A2 with an output of 150 PS (110 kW; 150 hp), which powers the EUDM version of the all-new CRV. SOHC i-VTEC
With the continued introduction of vastly different i-VTEC systems, one may assume that the term is now a catch-all for creative valve control technologies from Honda.
i-VTEC with Variable Cylinder Management (VCM)
In 2003, Honda introduced an i-VTEC V6 (an update of the J-series) that includes Honda's cylinder deactivation technology which closes the valves on one bank of (3) cylinders during light load and low speed (below 80 km/h (50 mph)) operation. According to Honda "VCM technology works on the principle that a vehicle only requires a fraction of its power output at cruising speeds. The system electronically deactivates cylinders to reduce fuel consumption. The engine is able to run on 3,4, or all 6 cylinders based on the power requirement. Essentially getting the best of both worlds. V6 power when accelerating or climbing, as well as the efficiency of a smaller engine when cruising." The technology was originally introduced to the US on the Honda Odyssey minivan, and can now be found on the Honda Accord Hybrid, the 2006 Honda Pilot, and the 2008 Honda Accord. Example: EPA estimates for the 2011 (271hp SOHC 3.5L) V6 Accord are 24mpg combined vs. 27 in the two 4 cylinder equipped models.
i-VTEC VCM was also used in 1.3L 4-cylinder engines used in Honda Civic Hybrid.[3]
i-VTEC i
It is a version of i-VTEC with direct injection.
It was first used in 2003 Honda Stream.
AVTEC
The AVTEC (Advanced VTEC) engine was first announced in 2006.[4] It combines continuously variable valve lift and timing control with continuously variable phase control. Honda originally planned to produce vehicles with AVTEC engines within next 3 years.
Although it was speculated that it would first be used in 2008 Honda Accord, the vehicle instead utilizes the existing i-VTEC system.
A related US patent (6,968,819) was filed in 2005-01-05.[5][6]
VTEC in motorcycles
Apart from the Japanese market-only Honda CB400SF Super Four HYPER VTEC,[7] introduced in 1999, the first worldwide implementation of VTEC technology in a motorcycle occurred with the introduction of Honda's VFR800 sportbike in 2002. Similar to the SOHC VTEC-E style, one intake valve remains closed until a threshold of 7000 rpm is reached, then the second valve is opened by an oil-pressure actuated pin. The dwell of the valves remains unchanged, as in the automobile VTEC-E, and little extra power is produced but with a smoothing-out of the torque curve. Critics maintain that VTEC adds little to the VFR experience while increasing the engine's complexity. Honda seem to agree: their VFR1200, a model announced in October 2009 to replace the VFR800, abandons the V-TEC concept in favour of a large capacity narrow-vee "unicam" (i.e. sohc) motor.
References
- ^ a b "The VTEC Engine". Honda Motor Co., Ltd. Retrieved 2011-03-11.
- ^ "acura.com". acura.com. Retrieved 2010-12-04.
- ^ "Honda Civic Hybrid Technology". Autospeed.com. Retrieved 2010-12-04.
- ^ Nunez, Alex (2006-09-25). "Honda reveals the Advanced VTEC engine". Autoblog.com. Retrieved 2010-12-04.
- ^ Tan, Paul. "Honda Files Advanced VTEC Patent". Paultan.org. Retrieved 2010-12-04.
- ^ "A-VTEC Details Break Cover at USPTO; TOV Analyzes". Vtec.net. Retrieved 2010-12-04.
- ^ "Honda Worldwide | Technology Close-up". World.honda.com. Retrieved 2010-12-04.
- "Technology Close-up". Honda Motor Co., Ltd. 2004. Retrieved 2006-07-25.
- "Honda Worldwide Technology Closeup". Honda Motor Co., Ltd. 2004. Retrieved 2007-07-12.
- "Honda Worldwide IVTEC Video". Honda Motor Co., Ltd. 2009. Retrieved 2009-05-17.
External links
- Honda tech pages: VTEC, i-VTEC DOHC, S2000 2.0L DOHC VTEC, Type-R 2.0L DOHC i-VTEC, 2.0L DOHC i-VTEC I, V6 3.0L i-VTEC, V6 3.5L VTEC
- Honda Technology Picture Book, VTEC
- Paul Tan : Honda's i-VTEC I Direct Injection Engine
- Temple of VTEC Asia Special Feature : The Basic VTEC Mechanism
- What is VTEC? Basic questions answered incl. 3D Colour Diagrams of VTEC System
- Animation of how VTEC works on YouTube
- World Honda: New i-VTEC Technology