Jump to content

Canadian Car and Foundry: Difference between revisions

Add links
From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
→The Second World War: del MacInnis trivia (put it on her page) & correct de-icing (it's not only for winter)
m →The Second World War: Curtiss SB2C Helldiver
Line 19: Line 19:
By 1939, with war on the horizon, Canadian Car & Foundry and its Chief Engineer, [[Elsie MacGill]], were contracted by the RAF to produce the [[Hawker Hurricane]].<ref>Hurricane Mark X, XI and XII</ref> Refinements introduced by MacGill on the Hurricane included skis and de-icing gear. When the production of the Hurricane was complete in 1943, CC&Fs workforce of 4,500 (half of them women), had built over 1,400 aircraft; about 10% of the Hurricanes built.
By 1939, with war on the horizon, Canadian Car & Foundry and its Chief Engineer, [[Elsie MacGill]], were contracted by the RAF to produce the [[Hawker Hurricane]].<ref>Hurricane Mark X, XI and XII</ref> Refinements introduced by MacGill on the Hurricane included skis and de-icing gear. When the production of the Hurricane was complete in 1943, CC&Fs workforce of 4,500 (half of them women), had built over 1,400 aircraft; about 10% of the Hurricanes built.


Following the success of the Hurricane contract, CC&F sought out and received a production order for the troublesome SB2C [[Curtiss Helldiver]]. A continuous stream of specification changes from the Curtiss aircraft designers jeopardized the mass production of the aircraft.{{Citation needed|date=March 2008}} Eventually, 834 Helldivers were produced by CC&F in various versions from SBW-1, SBW-1B, SBW-3,SBW-4E and SBW-5. Some of the Curtiss divebombers were sent directly to the [[Royal Navy]] under [[Lend-Lease]] arrangements.
Following the success of the Hurricane contract, CC&F sought out and received a production order for the troublesome [[Curtiss SB2C Helldiver]]. A continuous stream of specification changes from the Curtiss aircraft designers jeopardized the mass production of the aircraft.{{Citation needed|date=March 2008}} Eventually, 834 Helldivers were produced by CC&F in various versions from SBW-1, SBW-1B, SBW-3,SBW-4E and SBW-5. Some of the Curtiss divebombers were sent directly to the [[Royal Navy]] under [[Lend-Lease]] arrangements.


In 1944, the Canadian Car & Foundry built a revolutionary new aircraft in its Montreal shops - the [[Burnelli CBY-3]], also called the ''Loadmaster''. There were two examples built of an aerofoil-fuselage design originally developed by [[Vincent J. Burnelli]]. The CBY-3 was in some ways, far superior to the planes of its day{{Citation needed|date=March 2008}} (its primary competition was the [[DC-3 Dakota]]) in terms of cargo lifting capacity and overall performance, but the CBY-3 was fated never to enter full-scale production and was cancelled less than one year later.
In 1944, the Canadian Car & Foundry built a revolutionary new aircraft in its Montreal shops - the [[Burnelli CBY-3]], also called the ''Loadmaster''. There were two examples built of an aerofoil-fuselage design originally developed by [[Vincent J. Burnelli]]. The CBY-3 was in some ways, far superior to the planes of its day{{Citation needed|date=March 2008}} (its primary competition was the [[DC-3 Dakota]]) in terms of cargo lifting capacity and overall performance, but the CBY-3 was fated never to enter full-scale production and was cancelled less than one year later.

Revision as of 22:41, 17 October 2011

A preserved 1954 CCF-Brill trolley bus in Edmonton

Canadian Car and Foundry (CC&F) also variously known as "Canadian Car & Foundry," or more familiarly as "Can Car," manufactured buses, railroad rolling stock and later aircraft for the Canadian market. CC&F history goes back to 1897, but the main company was established in 1909 from an amalgamation of several companies and later became part of Hawker Siddeley Canada through the purchase by A.V. Roe Canada in 1957.

History

Portable power plant built by Canadian Car and Foundry[1]

Canadian Car & Foundry (CC&F) was established in 1909 in Montreal as the result of an amalgamation of three companies:

In 1911 the CC&F Board of Directors recognized that the company could improve its efficiency if they were able to produce their own steel castings, a component that was becoming common to all their products. They purchased Montreal Steel Works Limited at Longue Pointe, QC, the largest producer of steel castings in Canada, and the Ontario Iron & Steel Company, Ltd. at Welland, ON, which included both a steel foundry and a rolling mill.

Buses were produced at Fort William, Ontario and railcars in Montreal and Amherst. Streetcars were manufactured between 1897 to 1913, however the company focused exclusively on rebuilding existing streetcars after 1913.

A few years later, CC&F acquired the assets of Pratt & Letchworth, a Brantford, ON, rail car manufacturer. In the latter part of World War I, the expanding company opened a new plant in Fort William (now Thunder Bay) to manufacture rail cars and ships which included the famous Inkerman and Cerisoles Minesweepers that were both lost in Lake Superior; the Amherst plant started by Rhodes & Curry in Amherst was closed in 1931. In an attempt to enter the aviation market, CC&F produced a small series of Grumman fighter aircraft under licence and developed an unsuccessful, indigenous-designed fighter aircraft, the Gregor FDB-1.

The Second World War

CC&F Hawker Hurricane X on a test flight over Fort William, Ontario

By 1939, with war on the horizon, Canadian Car & Foundry and its Chief Engineer, Elsie MacGill, were contracted by the RAF to produce the Hawker Hurricane.[2] Refinements introduced by MacGill on the Hurricane included skis and de-icing gear. When the production of the Hurricane was complete in 1943, CC&Fs workforce of 4,500 (half of them women), had built over 1,400 aircraft; about 10% of the Hurricanes built.

Following the success of the Hurricane contract, CC&F sought out and received a production order for the troublesome Curtiss SB2C Helldiver. A continuous stream of specification changes from the Curtiss aircraft designers jeopardized the mass production of the aircraft.[citation needed] Eventually, 834 Helldivers were produced by CC&F in various versions from SBW-1, SBW-1B, SBW-3,SBW-4E and SBW-5. Some of the Curtiss divebombers were sent directly to the Royal Navy under Lend-Lease arrangements.

In 1944, the Canadian Car & Foundry built a revolutionary new aircraft in its Montreal shops - the Burnelli CBY-3, also called the Loadmaster. There were two examples built of an aerofoil-fuselage design originally developed by Vincent J. Burnelli. The CBY-3 was in some ways, far superior to the planes of its day[citation needed] (its primary competition was the DC-3 Dakota) in terms of cargo lifting capacity and overall performance, but the CBY-3 was fated never to enter full-scale production and was cancelled less than one year later.

Postwar developments

After the Second World War, the CC&F returned to its roots as a rail car manufacturer. They also made a successful leap into the streetcar business, supplying Montreal, Toronto, Regina, Calgary, Vancouver, Edmonton, and the Brazilian cities of Rio de Janeiro and São Paulo with various types of streetcars. The company concluded a licencing agreement with ACF-Brill (the successor to J. G. Brill) in 1944 to manufacture and sell throughout Canada buses and trolley coaches of ACF-Brill design as Canadian Car-Brill, in later years often written "CCF-Brill", for short. CC&F built 1,114 trolley buses[3] and a few thousand buses under the name. Trolleybus production ended in 1954; Edmonton Transit System's No. 202, a 1954 CCF-Brill T48A, was the very last Brill trolleybus built for any city.[4]

In 1957, wishing to diversify, the British Hawker Siddeley Group acquired CC&F through its Canadian subsidiary, A.V. Roe Canada Ltd.. In 1962, A.V. Roe Canada was dissolved and its assets became part of Hawker Siddeley Canada. CCF re-emerged as Can-Car Rail in 1983 as a joint division between Hawker Siddeley Canada and UTDC. The Can-Car Rail operations were based in Thunder Bay. Sold to SNC-Lavalin in 1986, re-sold to the Government of Ontario, CCF assets was finally acquired by Bombardier Transportation. Through a series of further acquisitions and inevitable mergers and rationalisations, CC&F faded from the annals of significant Canadian manufacturers, although the company still exists today as Bombardier Transportation Canada Incorporated Railcar facility in Thunder Bay, Ontario.

Products

Transit

Other

Aircraft

Customers

Preservation

Many CC&F-built buses have been preserved as historic vehicles, some in operating condition. For example, the Transit Museum Society, in Vancouver, has at least seven CC&F buses in its collection, including two CC&F-Brill trolleybuses.[5]

See also

References

Notes
  1. ^ "Welcome to Saskrailmuseum.org." Sask Power Car, September 11, 2008. Retrieved: 3 October 2008.
  2. ^ Hurricane Mark X, XI and XII
  3. ^ a b c Porter, Harry; and Worris, Stanley F.X. (1979). Trolleybus Bulletin No. 109: Databook II, pp. 63–64. Louisville (KY): North American Trackless Trolley Association (defunct).
  4. ^ Trolleybus Magazine No. 283 (January–February 2009), p. 11. National Trolleybus Association (UK). ISSN 0266-7452.
  5. ^ The Historic Bus Fleet. Transit Museum Society. 2009. Retrieved 2010-04-07.
Bibliography
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Canadian_Car_and_Foundry&oldid=456087749"