Isochronous burst transmission: Difference between revisions

Content deleted Content added

Inline

Revision as of 14:02, 16 July 2004

Isochronous burst transmission is a method of data transmission. In a data network where the information-bearer channel rate is higher than the input data signaling rate, transmission is performed by interrupting, at controlled intervals, the data stream being transmitted.

Note 1: Isochronous burst transmission enables communication between data terminal equipment (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.

Note 2: The binary digits are transferred at the information-bearer channel rate. The transfer is interrupted at intervals in order to produce the required average data signaling rate.

Note 3: The interruption is always for an integral number of unit intervals.

Note 4: Isochronous burst transmission has particular application where envelopes are being transferred between data circuit terminating equipment (DCE) and only the bytes contained within the envelopes are being transferred between the DCE and the DTE. Synonyms burst isochronous (deprecated) , interrupted isochronous transmission.

Source: from Federal Standard 1037C and from MIL-STD-188

Revision as of 12:11, 4 June 2004 edit Ssd (talk \| contribs) Autopatrolled, Extended confirmed users 5,737 edits m Category:Radio modulation modes ← Previous edit		Revision as of 14:02, 16 July 2004 edit undo Kevin Rector (talk \| contribs) Extended confirmed users 6,632 edits m d Next edit →
Line 1:		Line 1:
	'''Isochronous burst transmission''' is a method of data transmission. In a [[data]] [[network]] where the [[information-bearer channel]] rate is higher than the [[input]] [[data signaling rate]], [[transmission]] is performed by interrupting, at controlled intervals, the [[data stream]] being transmitted.		'''Isochronous burst transmission''' is a method of data transmission. In a [[data]] [[network]] where the [[information-bearer channel]] rate is higher than the [[input]] [[data signaling rate]], [[transmission (telecommunications)\|transmission]] is performed by interrupting, at controlled intervals, the [[data stream]] being transmitted.

	<i>Note 1:</i> [[Isochronous]] [[burst transmission]] enables communication between [[data terminal equipment]] (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE [[output]] data signaling rate.		<i>Note 1:</i> [[Isochronous]] [[burst transmission]] enables communication between [[data terminal equipment]] (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE [[output]] data signaling rate.