Heat-assisted magnetic recording

Heat-assisted magnetic recording (HAMR) is a technology that magnetically records data on high-stability media using laser thermal assistance to first heat the material. HAMR takes advantage of high-stability magnetic compounds such as iron platinum alloy. These materials can store single bits in a much smaller area without being limited by the same superparamagnetic effect that limits the current technology used in hard disk storage. The only catch being that they must be heated to apply the changes in magnetic orientation. HAMR was developed by Fujitsu in 2006 so that it could achieve one terabit per square inch densities.

History

• In 1954, engineers working for RCA filed a patent which described the basic principle of using heat in conjunction with a magnetic field to record data. This was followed by many other patents in this area with the initial focus on tape storage.
• In the 1980s, a class of mass storage device called the magneto-optical drive became commercially available which used essentially the same technique for writing data to a disk. One advantage of magneto-optic recording over purely magnetic storage at that time was that the bit size was defined by the size of the focused laser spot rather than the magnetic field. In 1988, a 5.25-inch magneto-optic disk could hold 650 megabytes of data with a roadmap to several gigabytes; a single 5.25" magnetic disk had a capacity of around 100 megabytes.
• Hard disk technology progressed rapidly and as of January 2012, desktop hard disk drives typically had a capacity of 500 to 2000 gigabytes, while the largest-capacity drives were 4 terabytes. It was recognised as early as 2000 that the then current technology for hard disk drives would have limitations and that heat-assisted recording was one option to extend the storage capacity.

Physics

The limitation of Perpendicular recording is often characterised by the competing requirements of Readability, Writeability and Stability commonly known as the Magnetic Recording Trilemma. HAMR is one technique proposed to break the trilemma and produce a workable solution. The problem is that to store data reliably for very small bit sizes the magnetic medium must be made of a material with a very high coercivity. At some capacity point the bit size is so small and the coercivity correspondingly so high that the magnetic field used for writing data cannot be made strong enough to permanently affect the data and data can no longer be written to the disk. HAMR solves this problem by temporarily and locally changing the coercivity of the magnetic storage medium by raising the temperature above the Curie temperature. Above the Curie temperature the medium effectively loses coercivity and a realistically achievable magnetic write field can write data to the medium.

Outlook

HAMR could increase the limit of magnetic recording by more than a factor of 100. This could result in storage capacities as great as 50 terabits per square inch.

• As of 2007, Seagate believed it could produce 300 terabit (37.5 terabyte) Hard disk drives using HAMR technology. Some news sites erroneously reported that Seagate would launch a 300 TB HDD by 2010. Seagate responded to this news stating that 50 terabit per-square-inch density is well past the 2010 timeframe and that this may also involve a combination of Bit Patterned Media.
• As of early 2009 Seagate is still working on HAMR and has achieved 250 Gb per square inch. This was half of the density achieved via perpendicular recording at that time.
• At the end of 2010 the HDD industry was predicting the next technology change in the 2014-2015 time period.
• In March 2012 Seagate became the first hard drive maker to achieve the milestone storage density of 1 terabit per square inch using HAMR technology.

See also

• Perpendicular recording
• Shingled recording
• Patterned media

External links

• 2002 Information by Seagate about HAMR