Jump to content

Plasticizer: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
Line 4: Line 4:


==For plastics==
==For plastics==
Plasticizers for plastics are additives, most commonly [[phthalate]] ester. Almost 90% of the market for plasticizer is for [[polyvinyl chloride|PVC]], giving this material improved flexibility and durability.<ref>David F. Cadogan and Christopher J. Howick “Plasticizers“ in Ullmann's Encyclopedia of Industrial Chemistry 2000, Wiley-VCH, Weinheim. {{DOI| 10.1002/14356007.a20_439}}</ref> Plasticizers work by embedding themselves between the chains of [[polymer]]s, spacing them apart (increasing the "free volume"), and thus significantly lowering the [[glass transition]] temperature for the plastic and making it softer. For plastics such as PVC, the more plasticizer added, the lower its cold flex temperature will be. This means that it will be more flexible and its durability will increase as a result of it. Plasticizers evaporate and tend to concentrate in an enclosed space; the "[[new car smell]]" is caused mostly by plasticizers evaporating from the car interior.
Plasticizers for plastics are additives, most commonly [[phthalate]] ester. Almost 90% of the market for plasticizer is for [[polyvinyl chloride|PVC]], giving this material improved flexibility and durability.<ref>David F. Cadogan and Christopher J. Howick “Plasticizers“ in Ullmann's Encyclopedia of Industrial Chemistry 2000, Wiley-VCH, Weinheim. {{DOI| 10.1002/14356007.a20_439}}</ref> Plasticizers work by embedding themselves between the chains of [[polymer]]s, spacing them apart (increasing the "free volume"), and thus significantly lowering the [[glass transition]] temperature for the plastic and making it softer. fdoiusofudosiufoisud


Plasticizers make it possible to achieve improved compound processing characteristics, while also providing flexibility in the end-use product. Ester plasticizers are selected based upon cost-performance evaluation. The rubber compounder must evaluate ester plasticizers for compatibility, processibility, permanence and other performance properties. The wide variety of ester chemistries that are in production include sebacates, adipates, gluterates, phthalates, azelates, and other specialty blends. This broad product line provides an array of performance benefits required for the many elastomer applications such as tubing and
Plasticizers make it possible to achieve improved compound processing characteristics, while also providing flexibility in the end-use product. Ester plasticizers are selected based upon cost-performance evaluation. The rubber compounder must evaluate ester plasticizers for compatibility, processibility, permanence and other performance properties. The wide variety of ester chemistries that are in production include sebacates, adipates, gluterates, phthalates, azelates, and other specialty blends. This broad product line provides an array of performance benefits required for the many elastomer applications such as tubing and

Revision as of 15:20, 10 November 2012


Plasticizers (UK = plasticisers) or dispersants are additives that increase the plasticity or fluidity of a material. The dominant applications are for plastics, especially polyvinyl chloride (PVC). The properties of other materials are also improved when blended with plasticizers including concrete, clays, and related products. The worldwide market for plasticizers in 2000 was estimated to be several million tons per year.

For plastics

Plasticizers for plastics are additives, most commonly phthalate ester. Almost 90% of the market for plasticizer is for PVC, giving this material improved flexibility and durability.[1] Plasticizers work by embedding themselves between the chains of polymers, spacing them apart (increasing the "free volume"), and thus significantly lowering the glass transition temperature for the plastic and making it softer. fdoiusofudosiufoisud

Plasticizers make it possible to achieve improved compound processing characteristics, while also providing flexibility in the end-use product. Ester plasticizers are selected based upon cost-performance evaluation. The rubber compounder must evaluate ester plasticizers for compatibility, processibility, permanence and other performance properties. The wide variety of ester chemistries that are in production include sebacates, adipates, gluterates, phthalates, azelates, and other specialty blends. This broad product line provides an array of performance benefits required for the many elastomer applications such as tubing and hose products, seals and gaskets, belts, wire and cable and print rolls. Low to high polarity esters provide utility in a wide range of elastomers including nitrile, polychloroprene, EPDM, chlorinated polyethylene, and epichlorohydrin. Plasticizer-elastomer interaction is governed by many factors such as solubility parameter, molecular weight and chemical structure. Compatibility and performance attributes are key factors in developing a rubber formulation for a particular application.[2]

Plasticizers also function as softeners, extenders, and lubricants, and play a significant role in rubber manufacturing.

Ester plasticizers

Plasticizers used in PVC and other plastics are often based on esters of polycarboxylic acids with linear or branched aliphatic alcohols of moderate chain length. These compounds are selected on the basis of many critieria including low toxicity, compatibility with the host material, nonvolatility, and expense. Phthalate esters of C8 alcohols meet these specifications and common plasticizers.

Bis(2-ethylhexyl) phthalate is a common plasticizer.

For concrete

Plasticizers or water reducers, and superplasticizer or high range water reducers, are chemical admixtures that can be added to concrete mixtures to improve workability. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is added (without "starving" the mix), which makes the concrete mixture less workable and difficult to mix, necessitating the use of plasticizers, water reducers, superplasticizers or dispersants. [3]

Plasticizers are also often used when pozzolanic ash is added to concrete to improve strength. This method of mix proportioning is especially popular when producing high-strength concrete and fiber-reinforced concrete.

Adding 1-2% plasticizer per unit weight of cement is usually sufficient. Adding an excessive amount of plasticizer will result in excessive segregation of concrete and is not advisable. Depending on the particular chemical used, use of too much plasticizer may result in a retarding effect.

Plasticizers are commonly manufactured from pop lignosulfonates, a by-product from the paper industry. Superplasticizers have generally been manufactured from sulfonated naphthalene condensate or sulfonated melamine formaldehyde, although newer products based on polycarboxylic ethers are now available. Traditional lignosulfonate-based plasticisers, naphthalene and melamine sulfonate-based superplasticisers disperse the flocculated cement particles through a mechanism of electrostatic repulsion (see colloid). In normal plasticisers, the active substances are adsorbed on to the cement particles, giving them a negative charge, which leads to repulsion between particles. Lignin, naphthalene and melamine sulfonate superplasticisers are organic polymers. The long molecules wrap themselves around the cement particles, giving them a highly negative charge so that they repel each other.

Polycarboxylate ether superplasticizer (PCE) or just polycarboxylate (PC), work differently from sulfonate-based superplasticizers, giving cement dispersion by steric stabilisation, instead of electrostatic repulsion. This form of dispersion is more powerful in its effect and gives improved workability retention to the cementitious mix.[4]

In ancient times, the Romans used animal fat, milk and blood to improve workability of concrete mixes.[5]

For gypsum wallboard production

Plasticizers can be added to wallboard stucco mixtures to improve workability. In order to reduce the energy in drying wallboard, less water is added, which makes the gypsum mixture very unworkable and difficult to mix, necessitating the use of plasticizers, water reducers or dispersants. Some studies also show that too much of lignosulfonate dispersant could result in a set-retarding effect. Data showed that amorphous crystal formations occurred that detracted from the mechanical needle-like crystal interaction in the core, preventing a stronger core. The sugars, chelating agents in lignosulfonates such as aldonic acids and extractive compounds are mainly responsible for set retardation. These low range water reducing dispersants are commonly manufactured from lignosulfonates, a by-product from the paper industry.

High range superplasticizers (dispersants) have generally been manufactured from sulfonated naphthalene condensate, although polycarboxylic ethers represent more modern alternatives. These high range water reducers are used at 1/2 to 1/3 of the lignosulfonate types.[6]

Traditional lignosulfonate and naphthalene sulfonate based plasticisers disperse the flocculated gypsum particles through a mechanism of electrostatic repulsion (see colloid). In normal plasticisers, the active substances are adsorbed on to the gypsum particles, giving them a negative charge, which leads to repulsion between particles. Lignin and naphthalene sulfonate plasticizers are organic polymers. The long molecules wrap themselves around the gypsum particles, giving them a highly negative charge so that they repel each other.Kirby, Glen H. (2002). "Rheological property evolution in concentrated cement-polyelectrolyte suspensions". Journal of the American Ceramic Society. 85 (12): 2989–2994. doi:10.1111/j.1151-2916.2002.tb00568.x. Retrieved 2008-03-27. {{cite journal}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)

Migration of plasticizers out of their host plastics leads to loss of flexibility, embrittlement, and cracking. This decades-old plastic lamp cord crumbles when flexed, due to loss of the plasticizers.

Plasticizers for energetic materials

Energetic material pyrotechnic compositions, especially solid rocket propellants and smokeless powders for guns, often employ plasticizers to improve physical properties of the propellant binder or of the overall propellant, to provide a secondary fuel, and ideally, to improve specific energy yield (e.g. specific impulse, energy yield per gram of propellant, or similar indices) of the propellant. An energetic plasticizer improves the physical properties of an energetic material while also increasing its specific energy yield. Energetic plasticizers are usually preferred to non-energetic plasticizers, especially for solid rocket propellants. Energetic plasticizers reduce the required mass of propellant, enabling a rocket vehicle to carry more payload or reach higher velocities than would otherwise be the case. However, safety or cost considerations may demand that non-energetic plasticizers be used, even in rocket propellants. The solid rocket propellant used to fuel the Space Shuttle solid rocket booster employs a non-energetic plasticizer/binder/secondary fuel: HTPB. HTPB is a synthetic rubber.

Controversy

Substantial concerns have been expressed over the safety of some plasticizers, especially because they have been classified as endocrine disruptors.

Appendix: various specific plasticizers

Dicarboxylic/tricarboxylic ester-based plasticizers

Trimellitates

Adipates, sebacates, maleates

Other plasticizers

Biodegradable plasticizers

Safer plasticizers with better biodegradability and fewer biochemical effects are being developed. Some such plasticizers are:

Plasticizers for energetic materials

Here are some energetic plasticizers used in rocket propellants and smokeless powders:

Due to the secondary alcohol groups, NG and BTTN have relatively low thermal stability. TMETN, DEGDN, BDNPF and BDNPA have relatively low energies. NG and DEGN have relatively high vapor pressure. [1]

References

  1. ^ David F. Cadogan and Christopher J. Howick “Plasticizers“ in Ullmann's Encyclopedia of Industrial Chemistry 2000, Wiley-VCH, Weinheim. doi:10.1002/14356007.a20_439
  2. ^ http://www.hallstar.com/techdocs/The_Function-Selection_Ester_Plasticizers.pdf
  3. ^ Cement Admixture Association. "CAA". www.admixtures.org.uk. Retrieved 2008-04-02.
  4. ^ http://pubs.acs.org/cen/coverstory/8241/8241process2.html
  5. ^ Cemex Mortars, p. 6
  6. ^ http://pharosproject.net/uploads/sources/lyondell-dispersants.pdf
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Plasticizer&oldid=522340804"