Schottky effect: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The '''Schottky effect''' is a phenomenon found in [[physics]]. |
|||
In electron emission devices, especially [[electron gun]]s, the thermionic electron emitter will be biased negative relative to its surroundings. This creates an electric field of magnitude ''F'' at the emitter surface. Without the field, the surface barrier seen by an escaping Fermi-level electron has height ''W'' equal to the local work-function. The electric field lowers the surface barrier by an amount Δ''W'', and increases the emission current. This is known as the '''Schottky effect''' (named for [[Walter H. Schottky]]) or field enhanced thermionic emission. It can be modeled by a simple modification of the Richardson equation, by replacing ''W'' by (''W'' − Δ''W''). This gives the equation<ref> |
In electron emission devices, especially [[electron gun]]s, the thermionic electron emitter will be biased negative relative to its surroundings. This creates an electric field of magnitude ''F'' at the emitter surface. Without the field, the surface barrier seen by an escaping Fermi-level electron has height ''W'' equal to the local work-function. The electric field lowers the surface barrier by an amount Δ''W'', and increases the emission current. This is known as the '''Schottky effect''' (named for [[Walter H. Schottky]]) or field enhanced thermionic emission. It can be modeled by a simple modification of the Richardson equation, by replacing ''W'' by (''W'' − Δ''W''). This gives the equation<ref> |
||
{{cite journal |
{{cite journal |
||
Revision as of 21:04, 9 March 2013
The Schottky effect is a phenomenon found in physics.
In electron emission devices, especially electron guns, the thermionic electron emitter will be biased negative relative to its surroundings. This creates an electric field of magnitude F at the emitter surface. Without the field, the surface barrier seen by an escaping Fermi-level electron has height W equal to the local work-function. The electric field lowers the surface barrier by an amount ΔW, and increases the emission current. This is known as the Schottky effect (named for Walter H. Schottky) or field enhanced thermionic emission. It can be modeled by a simple modification of the Richardson equation, by replacing W by (W − ΔW). This gives the equation[1][2]
where ε0 is the electric constant (also, formerly, called the vacuum permittivity).
Electron emission that takes place in the field-and-temperature-regime where this modified equation applies is often called Schottky emission. This equation is relatively accurate for electric field strengths lower than about 108 V m−1. For electric field strengths higher than 108 V m−1, so-called Fowler-Nordheim (FN) tunneling begins to contribute significant emission current. In this regime, the combined effects of field-enhanced thermionic and field emission can be modeled by the Murphy-Good equation for thermo-field (T-F) emission.[3] At even higher fields, FN tunneling becomes the dominant electron emission mechanism, and the emitter operates in the so-called "cold field electron emission (CFE)" regime.
Thermionic emission can also be enhanced by interaction with other forms of excitation such as light.[4] For example, excited Cs-vapours in thermionic converters form clusters of Cs-Rydberg matter which yield a decrease of collector emitting work function from 1.5 eV to 1.0–0.7 eV. Due to long-lived nature of Rydberg matter this low work function remains low which essentially increases the low-temperature converter’s efficiency.[5]
See also
References
- ^ Kiziroglou, M. E.; Li, X.; Zhukov, A. A.; De Groot, P. A. J.; De Groot, C. H. (2008). "Thermionic field emission at electrodeposited Ni-Si Schottky barriers". Solid-State Electronics. 52 (7): 1032–1038. Bibcode:2008SSEle..52.1032K. doi:10.1016/j.sse.2008.03.002.
- ^
Orloff, J. (2008). "Schottky emission". Handbook of Charged Particle Optics (2nd ed.). CRC Press. pp. 5–6. ISBN 978-1-4200-4554-3.
{{cite book}}: External link in|chapterurl=|chapterurl=ignored (|chapter-url=suggested) (help) - ^ Murphy, E. L.; Good, G. H. (1956). "Thermionic Emission, Field Emission, and the Transition Region". Physical Review. 102 (6): 1464–1473. Bibcode:1956PhRv..102.1464M. doi:10.1103/PhysRev.102.1464.
- ^ Mal'Shukov, A. G.; Chao, K. A. (2001). "Opto-Thermionic Refrigeration in Semiconductor Heterostructures". Physical Review Letters. 86 (24): 5570–5573. Bibcode:2001PhRvL..86.5570M. doi:10.1103/PhysRevLett.86.5570.
- ^ Svensson, R.; Holmlid, L. (1992). "Very low work function surfaces from condensed excited states: Rydber matter of cesium". Surface Science. 269/270: 695–699. Bibcode:1992SurSc.269..695S. doi:10.1016/0039-6028(92)91335-9.
 | This physics-related article is a stub. You can help Wikipedia by expanding it. |