Jump to content

Glass brick: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
Line 15: Line 15:
Some hollow glass wall blocks are available in coloured variants. These coloured variants fall into two categories; those that are manufactured with coloured glass which are UV stable and can be used in the same locations as standard clear glass blocks. The other method by which coloured glass blocks are achieved is to inject a coloured material, dye or transparent paint into the hollow centre of the blocks to form a permanent coating. This method of producing coloured blocks enables vibrant colours to be achieved which are not possible with coloured glass. The downside of this production method is that the coloured coating may not be UV stable and can fade in bright sunshine over time and may therefore, not be suitable for all locations.
Some hollow glass wall blocks are available in coloured variants. These coloured variants fall into two categories; those that are manufactured with coloured glass which are UV stable and can be used in the same locations as standard clear glass blocks. The other method by which coloured glass blocks are achieved is to inject a coloured material, dye or transparent paint into the hollow centre of the blocks to form a permanent coating. This method of producing coloured blocks enables vibrant colours to be achieved which are not possible with coloured glass. The downside of this production method is that the coloured coating may not be UV stable and can fade in bright sunshine over time and may therefore, not be suitable for all locations.


Glass wall blocks are fixed together to form complete walls by several methods – the most common method of construction is to bed the blocks together in a [[Portland cement]]-based [[Mortar (masonry)|mortar]] with reinforcing rods of steel placed within the mortar as recommended by the project architect or block manufacturer.
Glass wall blocks are fixed together to form complete walls by several methods – the most common method of construction is to bed the blocks together in a [[Portland cement]]-based [[Mortar (masonry)|mortar]] with reinforcing rods of steel placed within the mortar as recommended by the project architect or [http://New%20Age%20Glass%20Ltd. New Age Glass Ltd.]


Other methods of construction include several proprietary systems whereby the mortar is replaced by [[timber]] or [[PVC]] extrusions.
Other methods of construction include several proprietary systems whereby the mortar is replaced by [[timber]] or [[PVC]] extrusions.

Revision as of 20:42, 23 May 2013

Glass brick, also known as glass block, is an architectural element made from glass. Glass bricks provide visual obscuration while admitting light. The glass block was originally developed in the early 1900s to provide natural light in manufacturing plants. Glass bricks are produced for both wall and floor applications. Glass blocks for use in floors are normally manufactured as a single solid piece, or as a hollow glass block with thicker side walls than the standard wall blocks. These blocks are normally cast into a reinforced concrete gridwork or set into a metal frame, allowing multiple units to be combined to span over openings in basements and roofs. Glass wall blocks should not be used in flooring applications. Hollow glass wall blocks are manufactured as two separate hemispheres and, whilst the glass is still molten, the two hemispheres are pressed together and annealed. The resulting glass blocks will have a partial vacuum at the hollow centre.

Specialist glass blocks are produced for various applications including:

Bullet and vandal resistance: these blocks are generally solid glass or have very thick side walls similar to pavement blocks.

Fire resistance: fire resistance of varying degrees can be achieved by several methods. Standard production hollow wall block will offer little fire resistance; however, resistance is improved by utilising specially produced hollow blocks with thicker sidewalls, or the inclusion of a special layer of fire resisting material between the two hemispheres of the block during manufacture. Some manufacturers of glass blocks have developed a method of bonding two glass blocks together with adhesive, producing blocks of up to 160 mm (6½”) thick with enhanced fire resistance. It is important that the block manufacturer’s recommendations are followed with regards to the installation of fire resisting glass block walls, as without special construction techniques, the wall will not achieve the desired fire resistance.

A recent innovation in the manufacture of glass blocks is the inclusion of argon gas within the hollow centre of glass wall blocks. This advancement in production technique has resulted in a glass block which is able to offer significantly improved thermal insulation properties.

Glass blocks in Europe are manufactured in accordance with the European Standard EN1052-2. The International Standard is ISO TC 160/SG1. The Standards allow for variation in sizes and production irregularity. Blocks fall within three classifications; Class1, Class 2 and Class 3 with Class 1 being the highest and best rating with a maximum permissible deviation from designed size and rectangularity of 1 mm. Some hollow glass wall blocks are available in coloured variants. These coloured variants fall into two categories; those that are manufactured with coloured glass which are UV stable and can be used in the same locations as standard clear glass blocks. The other method by which coloured glass blocks are achieved is to inject a coloured material, dye or transparent paint into the hollow centre of the blocks to form a permanent coating. This method of producing coloured blocks enables vibrant colours to be achieved which are not possible with coloured glass. The downside of this production method is that the coloured coating may not be UV stable and can fade in bright sunshine over time and may therefore, not be suitable for all locations.

Glass wall blocks are fixed together to form complete walls by several methods – the most common method of construction is to bed the blocks together in a Portland cement-based mortar with reinforcing rods of steel placed within the mortar as recommended by the project architect or New Age Glass Ltd.

Other methods of construction include several proprietary systems whereby the mortar is replaced by timber or PVC extrusions.

In architecture