Jump to content

Z3 (computer): Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
Undid revision 560667157 by Dennis Bratland (talk)
Line 92: Line 92:
[[Category:Inventions of the Third Reich]]
[[Category:Inventions of the Third Reich]]
[[Category:1940s computers]]
[[Category:1940s computers]]
[[Category:German inventions]]

Revision as of 22:54, 19 June 2013

Zuse Z3 replica on display at Deutsches Museum in Munich

The Z3 was an electromechanical computer designed by Konrad Zuse. It was the world's first working programmable, fully automatic digital computer.[1] The Z3 was built with 2000 relays, implementing a 22 bit word length that operated at a clock frequency of about 5–10 Hz.[2] Program code and data were stored on punched film.

The Z3 was completed in Berlin in 1941. The German Aircraft Research Institute used it to perform statistical analyses of wing flutter.[3] Zuse asked the German government for funding to replace the relays with fully electronic switches, but funding was denied during World War II since such development was deemed "not war-important".[4] The original Z3 was destroyed in 1943 during an Allied bombardment of Berlin. A fully functioning replica was built in the 1960s by Zuse's company, Zuse KG, and is on permanent display in the Deutsches Museum. The Z3 was Turing-complete.

Thanks to this machine and its predecessors, Konrad Zuse is often regarded as the inventor of the computer.[5][6][7][8]

Design and development

Zuse designed the Z1 in 1935 to 1936 and built it from 1936 to 1938. The Z1 was wholly mechanical and only worked for a few minutes at a time at most. Helmut Schreyer advised Zuse to use a different technology. As a doctoral student at the Berlin Institute of Technology in 1937 he worked on the implementation of Boolean operations and (in today's terminology) flip-flops on the basis of vacuum tubes (valves). In 1938 Schreyer demonstrated a circuit on this basis to a small audience, and explained his vision of an electronic computing machine – but since the largest operational electronic devices contained far fewer tubes this was considered practically infeasible.[9]

Zuse decided to implement the next design based on relays. The realization of the Z2 was helped financially by Dr. Kurt Pannke, who manufactured small calculating machines. The Z2 was completed in 1939 and presented to an audience of the [Deutsche Versuchsanstalt für Luftfahrt] Error: {{Lang}}: text has italic markup (help) ("German Laboratory for Aviation") in 1940 in Berlin-Adlershof. Zuse was lucky – this presentation was one of the few instances where the Z2 actually worked and could convince the DVL to partly finance the next design.[9]

Improving on the basic Z2 machine, he built the Z3 in 1941, which was a highly secret project of the German government.[10] Dr. Jenissen, member of the Reich Air Ministry acted as a government supervisor for orders of the ministry to Zuse's company ZUSE Apparatebau.[11] A further intermediary between Zuse and the Reich Air Ministry was the aerodynamicist Herbert A. Wagner .[12]

The Z3 was completed in 1941 and was faster and far more reliable than the Z1 and Z2. The Z3 floating point was improved over that of the Z1 in that it implemented exception handling. The exceptional values plus infinity, minus infinity and undefined could be generated and passed through operations. The Z3 stored its program on an external tape, thus no rewiring was necessary to change programs.

On 12 May 1941 the Z3 was presented to an audience of scientists including the professors Alfred Teichmann and Curt Schmieden[13] of the [Deutsche Versuchsanstalt für Luftfahrt] Error: {{Lang}}: text has italic markup (help) ("German Laboratory for Aviation") in Berlin,[14] today known as the German Aerospace Center in Cologne.

Zuse moved on to the Z4 design; this was built days before the war ended.

The concept of a universal Turing machine

It was possible to construct loops on the Z3, but there was no conditional branch instruction. Nevertheless, the Z3 was Turing-complete – how to implement a universal Turing machine on the Z3 was shown in 1998 by Raúl Rojas.[15][16] He proposes that the tape program would have to be long enough to execute every possible path through both sides of every branch. It would compute all possible answers, but the unneeded results would be canceled out (a kind of speculative execution). Rojas concludes, "We can therefore say that, from an abstract theoretical perspective, the computing model of the Z3 is equivalent to the computing model of today's computers. From a practical perspective, and in the way the Z3 was really programmed, it was not equivalent to modern computers."

From a pragmatic point of view, however, the Z3 provided a quite practical instruction set for the typical engineering applications of the 1940s – Zuse was a civil engineer who only started to build his computers to facilitate his work in his main profession.

Relation to other work

The success of Zuse's Z3 is often attributed[by whom?] to its use of the simple binary system. This was invented roughly three centuries earlier by Gottfried Leibniz; Boole later used it to develop his Boolean algebra. In 1937, Claude Shannon introduced the idea of mapping Boolean algebra onto electronic relays in a seminal work on digital circuit design. Zuse however did not know Shannon's work and developed the groundwork independently.[17]

Zuse's coworker Helmut Schreyer built an electronic digital experimental model of a computer using 100 vacuum tubes[18] in 1942, but it was lost at the end of the war.

The Tommy Flowers built Colossus (1943)[19] and the Atanasoff–Berry Computer (1942) used thermionic valves (vacuum tubes) and binary representation of numbers. Programming was by means of re-plugging patch panels and setting switches.

The ENIAC computer, completed after the war, used thermionic valves (vacuum tubes) to implement switches, and decimal representation for numbers. Until 1948 programming was, as with Colossus, by patch leads and switches.

The Manchester Baby of 1948 and the EDSAC of 1949 were the world's first computers with internally stored programs. They implemented a concept frequently (but erroneously) attributed to a 1945 paper of John von Neumann and colleagues. Von Neumann's own papers give proper credit to Alan Turing, and the concept had actually been mentioned earlier by Konrad Zuse himself, in a 1936 patent application (which was rejected).

Specifications

  • Average calculation Speed: Addition 0.8 seconds Multiplication 3 seconds
  • Arithmetic Unit: Binary floating point, 22 bit, add, subtract, multiply, divide, square root
  • Data memory: 64 words with a length of 22 bits
  • Program memory: Punched celluloid tape
  • Input: Decimal floating point numbers
  • Output: Decimal floating point numbers
  • Input and Output was facilitated by a terminal, that had a special keyboard and a row of lamps to show results[9]
  • Elements: Around 2,000 relays (1,400 for the memory)[9]
  • Frequency: 5.3 Hertz
  • Power Consumption: Around 4000 watts
  • Weight: Around 1,000 kilograms (2,200 lb)

See also

Notes

  1. ^ "A Computer Pioneer Rediscovered, 50 Years On". The New York Times. April 20, 1994.
  2. ^ Zuse, Konrad (1993). Der Computer. Mein Lebenswerk (in German) (3rd ed.). Berlin: Springer-Verlag. p. 55. ISBN 978-3-540-56292-4.
  3. ^ Archived 2008-03-18 at the Wayback Machine
  4. ^ Hans-Willy Hohn (1998). Kognitive Strukturen und Steuerungsprobleme der Forschung. Kernphysik und Informatik im Vergleich (in German). Schriften des Max-Planck-Instituts für Gesellschaftsforschung Köln. p. 148. ISBN 978-3-593-36102-4.
  5. ^ RTD Net: "From various sides Konrad Zuse was awarded with the title "Inventor of the computer"."
  6. ^ GermanWay: "(...)German inventor of the computer"
  7. ^ Monsters & Critics: "he(Zuse) built the world's first computer in Berlin"
  8. ^ About.com: "Konrad Zuse earned the semiofficial title of "inventor of the modern computer""
  9. ^ a b c d Lippe, Prof. Dr. Wolfram. "Kapitel 14 - Die ersten programmierbaren Rechner (i.e. The first programmable computers)" (PDF). Retrieved 2010-06-21.
  10. ^ "New perspectives, computer concepts", June Jamrich Parsons, Dan Oja. Cengage Learning, 2007. ISBN 978-1-4239-0610-0, ISBN 978-1-4239-0610-0. Retrieved March 14, 2010.
  11. ^ 1977-compilation by Zuse of people in contact to his computers from 1935 to 1945
  12. ^ Herbert Bruderer, ETH Zurich. "Konrad Zuse und die ETH Zürich" (PDF). Retrieved 2011-10-26.
  13. ^ "An einem 12. Mai" (in German). Deutsches Historisches Museum (German Historical Museum).
  14. ^ "Technische Universität Berlin - Rechenhilfe für Ingenieure" (in German). Technical University of Berlin.
  15. ^ Rojas, R. (1998). "How to make Zuse's Z3 a universal computer". IEEE Annals of the History of Computing. 20 (3): 51–54. doi:10.1109/85.707574.
  16. ^ Rojas, Raúl. "How to Make Zuse's Z3 a Universal Computer".
  17. ^ Hans-Willy Hohn (1998). Kognitive Strukturen und Steuerungsprobleme der Forschung. Kernphysik und Informatik im Vergleich (in German). Schriften des Max-Planck-Instituts für Gesellschaftsforschung Köln. p. 149. ISBN 978-3-593-36102-4.
  18. ^ "Helmut Schreyer" at the University of Berlin
  19. ^ B. Jack Copeland, ed. (2006). Colossus: The Secrets of Bletchley Park's Codebreaking Computers. Oxford University Press. ISBN 978-0-19-284055-4.

References

  • B. Jack Copeland, ed. (2006). Colossus: The Secrets of Bletchley Park's Codebreaking Computers. Oxford University Press. ISBN 978-0-19-284055-4.
  • R. Rojas, F. Darius, C. Göktekin, and G. Heyne (2005). "The reconstruction of Konrad Zuse's Z3. IEEE Annals of the History of Computing, 27(3)": 23–32. {{cite journal}}: Cite journal requires |journal= (help)CS1 maint: multiple names: authors list (link)
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Z3_(computer)&oldid=560673880"