Jump to content

Icky-pick: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
No edit summary
Line 1: Line 1:
'''Icky-pick''' or '''icky-pic''' is a name for a gelatinous substance contained within outdoor-rated communications cables, including both twisted pair copper cabling and fiber optic cabling.
'''Icky-pick''' or '''icky-pic''' is a name for a gelatinous substance or filler contained within outdoor-rated communications cables, including both twisted pair copper cabling and fiber optic cabling.


'''PIC''' is the abbreviation for Plastic Insulated Cable. The cable is filled with an icky substance. The filled cable itself, therefore, is called an "Icky PIC".
'''PIC''' is the abbreviation for Plastic Insulated Cable. The cable is filled with an icky substance. The filled cable itself, therefore, is called an "Icky PIC".


Icky-pick has three primary functions:
Icky-pick has two primary functions:


* Deter animals from biting and damaging the cable due to the smell and taste of the gel
* Deter animals from biting and damaging the cable due to the smell and taste of the gel
* Seals any nick in the outer jacket if they do bite it
* Seals any nick or gash in the outer jacket if they do bite it, preventing water from entering the cable, which would cause corrosion and damage from freeze expansion
* Prevent water from entering the cable, causing corrosion and damage from freeze expansion


Icky-pick is a very thick petroleum-based substance with very high flammability, and consequently is only rated for outdoor use, frequently direct-buried in the ground. An outdoor cable spliced onto an indoor terminal block is prone to leak the gelatin which is a fire hazard, hence in many situations the icky-pic cable is spliced (usually outside the building) to a short run of normal cable which is run iside the building and terminated. The thick gelatin stains clothing and hands and is very difficult to remove. When fiber-optic cables are to be spliced, the gelatin must be removed with solvents and swabs to prevent fouling of the splice.
The actual icky-pick compound is a very thick petroleum-based substance with very high flammability, and consequently is only rated for outdoor use, frequently direct-buried in the ground. An outdoor cable spliced onto an indoor terminal block is prone to leak the gelatin which is a fire hazard, hence in many situations the icky-pic cable is spliced (usually outside the building) to a short run of normal cable which is run in a protective conduit into the building and then terminated. The thick gelatin stains clothing and hands and is very difficult to remove.
When fiber-optic cables are to be spliced, the gelatin must be removed with solvents and swabs to prevent fouling of the splice. [[Paint thinner]] or charcoal starter is a frequently used and commonly available remover and clean-up agent.


==See also==
==See also==

Revision as of 18:11, 20 July 2013

Icky-pick or icky-pic is a name for a gelatinous substance or filler contained within outdoor-rated communications cables, including both twisted pair copper cabling and fiber optic cabling.

PIC is the abbreviation for Plastic Insulated Cable. The cable is filled with an icky substance. The filled cable itself, therefore, is called an "Icky PIC".

Icky-pick has two primary functions:

  • Deter animals from biting and damaging the cable due to the smell and taste of the gel
  • Seals any nick or gash in the outer jacket if they do bite it, preventing water from entering the cable, which would cause corrosion and damage from freeze expansion

The actual icky-pick compound is a very thick petroleum-based substance with very high flammability, and consequently is only rated for outdoor use, frequently direct-buried in the ground. An outdoor cable spliced onto an indoor terminal block is prone to leak the gelatin which is a fire hazard, hence in many situations the icky-pic cable is spliced (usually outside the building) to a short run of normal cable which is run in a protective conduit into the building and then terminated. The thick gelatin stains clothing and hands and is very difficult to remove.

When fiber-optic cables are to be spliced, the gelatin must be removed with solvents and swabs to prevent fouling of the splice. Paint thinner or charcoal starter is a frequently used and commonly available remover and clean-up agent.

See also

External references