Sten

For other uses, see Sten (disambiguation).

Sten,Submachine gun
Sten Mk. II (trigger mechanism cover is missing)
Type	Submachine gun
Place of origin	United Kingdom
Service history
In service	1941–1960s
Used by	See Users
Wars	World War II Warsaw Uprising Second Sino-Japanese War Chinese Civil War Indonesian National Revolution Malayan Emergency Korean War Mau Mau Uprising Suez Crisis 1948 Arab-Israeli War Sino-Indian War Vietnam War Rhodesian Bush War Turkish invasion of Cyprus Indo-Pakistan Wars IRA Border Campaign The Troubles British colonial conflicts
Production history
Designer	Major Reginald V. Shepherd Harold J. Turpin
Designed	1940
Manufacturer	Royal Small Arms Factory Enfield BSA ROF Fazakerley ROF Maltby ROF Theale Berkshire Lines Brothers Ltd Long Branch Canada (plus numerous sub-contractors making individual parts). Various Underground Resistance Group Factories.
Produced	1941– (version dependent)
No. built	3.7–4.6 million (all variants, depending on source)
Variants	Mk. I, II, IIS, III, IV, V, VI Unit Cost $10 or £2.3 in 1942
Specifications
Mass	3.2 kg (7.1 lb) (Mk. II)
Length	760 mm (30 in)
Barrel length	196 mm (7.7 in)
Cartridge	9x19mm Parabellum
Action	Blowback-operated, Open bolt
Rate of fire	version dependent; ~500 round/min
Muzzle velocity	365 m/s (1,198 ft/s) 305 m/s (1,001 ft/s) (suppressed models)
Effective firing range	100 m
Feed system	32-round detachable box magazine
Sights	fixed peep rear, post front

The STEN (or Sten gun) was a family of British 9 mm submachine guns used extensively by British and Commonwealth forces throughout World War II and the Korean War. They were notable for having a simple design and very low production cost making them effective insurgency weapons for resistance groups.

STEN is an acronym, from the names of the weapon's chief designers, Major Reginald V. Shepherd and Harold Turpin, and EN for Enfield. Over 4 million Stens in various versions were made in the 1940s.

History

The Sten emerged while Britain was engaged in the Battle of Britain, facing invasion by Germany. The army was forced to replace weapons lost during the evacuation from Dunkirk while expanding at the same time. Prior to 1941 (and even later) the British were purchasing all the Thompson submachine guns they could from the United States, but these did not begin to meet demand. The American entry into the war at the end of 1941 placed an even bigger demand on the facilities making Thompsons. In order to rapidly equip a sufficient fighting force to counter the Axis threat, the Royal Small Arms Factory, Enfield, was commissioned to produce an alternative.

The credited designers were Major R. V. Shepherd, OBE, Inspector of Armaments in the Ministry of Supply Design Department at The Royal Arsenal, Woolwich, (later Assistant Chief Superintendent at the Armaments Design Department) and Mr. Harold John Turpin, Senior Draughtsman of the Design Department of the Royal Small Arms Factory (RSAF), Enfield. Shepherd had been recalled to service after having retired and spending some time at BSA.

The Sten shared design features, such as its side-mounted magazine configuration, with the Royal Navy's Lanchester submachine gun, which was a copy of the German MP28. In terms of manufacture, the Lanchester was entirely different, being made of high-quality materials with pre-war fit and finish, in stark contrast to the Sten's austere execution. The Lanchester and Sten magazines were even interchangeable (though the Lanchester's magazine was longer with a 50 round capacity, compared to the Sten's 32 round capacity).

The Sten used simple stamped metal components and minor welding, which required a minimum of machining and manufacturing. Much of the production could be performed by small workshops, with the firearms assembled at the Enfield site. Over the period of manufacture the Sten design was further simplified: the most basic model, the Mark III, could be produced from five man-hours work. Some of the cheapest versions were made from only 47 different parts. It was distinctive for its bare appearance (just a pipe with a metal loop for a stock), and its horizontal magazine. The Mark I was a more finely finished weapon with a wooden foregrip and handle; later versions were generally more spartan, although the final version, the Mark V, which was produced after the threat of invasion had died down, was produced to a higher standard.

The Sten underwent various design improvements over the course of the war. For example, the Mark 4 cocking handle and corresponding hole drilled in the receiver were created to lock the bolt in the closed position to reduce the likelihood of accidental discharges inherent in the design. Most changes to the production process were more subtle, designed to give greater ease of manufacture and increased reliability. Sten guns of late 1942 and beyond were, in general, highly effective weapons, though complaints of accidental discharge continued throughout the war. Such was the ease of manufacture that the Germans also produced a version of the Sten, the MP 3008, late in the war and the Sten was used extensively by Jewish partisans during the Israeli War of Independence.

The Sten was replaced by the Sterling submachine gun from 1953 and was gradually withdrawn from British service in the 1960s. The other Commonwealth nations made or adopted their own replacements.

Design

File:StenmkII animation.gif

Sten Mark II operation

The Sten was a blowback-operated submachine gun firing from an open bolt with a fixed firing pin on the face of the bolt. This means the bolt remains to the rear when the weapon is cocked, and on pulling the trigger the bolt flies forward under spring pressure, stripping the round from the magazine, chambering it and firing the weapon all in the same movement. There is no breech locking mechanism, the rearward movement of the bolt caused by the recoil impulse is arrested only by the mainspring and the bolt's inertia. The basic operating principles were similar to those of the German MP40, Russian PPSh-41, US M3 submachine gun and numerous other designs. These shared similar attributes and faults; they were simple and cheap to manufacture, and put an automatic weapon into the hands of soldiers, greatly increasing the short-range firepower of the infantry, especially when the main infantry weapon was a bolt-action rifle capable of only around 15 rounds per minute and not suited for short-range combat. However, the open-bolt firing and use of pistol ammunition severely restricted accuracy, with an effective range of around 100m.

Stoppages could occur due to a variety of problems: some as a result of poor maintenance, while others were peculiar to the Sten. Carbon buildup on the face of the breech or debris in the bolt raceway could cause a failure to fire, while a dirty chamber could cause a failure to feed. Firing the Sten by grasping the magazine with the supporting hand tended to wear the magazine catch, altering the angle of feed and causing a failure to feed - the correct method of holding the weapon was as with a rifle, the left hand cradling the fore piece, as per the picture of Mr Churchill firing one below.

Additional problems stemmed from the Sten's magazine, which was a direct copy of the one used in the German MP-38, originally in order to facilitate the use of German 9 mm magazines. Unfortunately, this decision necessarily incorporated the Erma magazine's faults in the process. The magazine had two columns of 9 mm cartridges in a staggered arrangement, merging at the top to form a single column. While other staggered magazines, such as the Thompson, fed from both the left and right side alternately (double-column, double feed), the Sten magazine, like the MP38, required the cartridges to gradually merge at the top of the magazine to form a single column (double column, single feed). As a consequence, any dirt or foreign matter in this taper area could cause feed malfunctions. Additionally, the walls of the magazine lip had to endure the full stresses of the rounds being pushed in by the spring. This, along with rough handling could result in deformation of the magazine lips (which required a precise 8° feed angle to operate), resulting in misfeeding and a failure to fire.

Modern 9 mm magazines, such as those used by the Sterling SMG, are curved and feed both sides to avoid this problem. If a Sten failed to feed due to jammed cartridges in the magazine, standard practice to clear it was as follows: remove magazine from Sten, tap the base of the magazine against the knee, re-insert magazine in Sten, then recocking the weapon and firing again as normal. To facilitate easier loading when attempting to push the cartridges down to insert the next one, a magazine filler tool was developed and formed part of the weapon's kit.

The slot on the side of the body where the cocking knob ran was also a target of criticism, as the long opening could allow foreign objects to enter. On the other hand, a beneficial side-effect of the Sten's minimalist design was that it would fire without any lubrication. This proved useful in desert environments such as the Western Desert Campaign, where oil attracted and retained dust and sand.

The open bolt design combined with cheap manufacture and rudimentary safety devices also meant the weapon was prone to accidental discharges, which proved hazardous. A simple safety could be engaged while the bolt was in the rearwards (cocked) position. However, if a Sten with a loaded magazine, with the bolt in the closed position, was dropped or the butt was knocked against the ground, the bolt could move far enough rearward to pick up a round (but not far enough to be engaged by the trigger mechanism) and the spring pressure could be enough to chamber and fire the round. The Mk 4 cocking handle was designed to prevent this by enabling the bolt to be locked in its forward position, thereby immobilising it. Wear and manufacturing tolerances could render these safety devices ineffective.

Variants

Sten guns were produced in several basic marks (though the Mk I saw limited service, and the Mk IV was never issued), and nearly half of the total produced were Mark II versions. Approximately 4.5 million Stens were produced during the war.

Mark I

The first ever Mk I Sten gun (number 'T-40/1' indicating its originator Harold Turpin, the year 1940 and the serial number "1") was handmade by Turpin at the Philips Radio works at Perivale, Middlesex during December 1940/January 1941. This particular weapon is held by the historical weapons collection of the British Army's Infantry and Small Arms School Corps in Warminster, Wiltshire.

The first model had a conical flash hider and fine finish. It had a wooden foregrip and forward handle (sometimes this was made of steel), as well for a section of the stock. The stock was a small tube outline, rather like the Mark II Canadian. One unique feature was that the front pistol grip could be rotated forward to make the firearm easier to stow. The barrel sleeve extended all the way to the end, where it met the flash hider. Along the top of the tube surrounding the barrel was a line of small holes and its sights were configured somewhat differently. About 100,000 were made before production switched to the Mark II. Sten Mk I's in German possession were designated MP.748(e), the 'e' standing for englisch.

Mark I*

This was the first simplification of the Mk I. The foregrip, the wooden furniture and the flash hider were deleted for production expediency.

Mark II

The Mark II was the most common variant, with two million units produced. It was a much rougher weapon than the Mk I. The flash eliminator and the folding handle (the grip) of the Mk I was eliminated. A removable barrel was now provided which projected 3 inches (76 mm) beyond the barrel sleeve. Also, from the operator's perspective, a special catch allowed the magazine to be slid partly out of the magazine housing and the housing rotated 90 degrees counter-clockwise, together covering the ejection opening and allowing the weapon and magazine both to lie flat on its side.

Winston Churchill with a Sten Mk II in Shoeburyness on June 13th 1941.

The barrel sleeve was shorter and rather than having small holes on the top, it had three sets of three holes equally spaced on the shroud. To allow a soldier to hold a Sten by the hot barrel sleeve with the supporting hand, an insulating lace-on leather sleeve guard was sometimes issued. Sten Mk II's in German possession were designated MP.749(e). Some MkIIs were fitted with a wooden stock as this part was desirable and interchangeable with the Mk V. Also, the Spz-kr assault rifle uses the receiver and components from the Sten Mk II.

Regular Mark II:

• Overall Length: 762 mm (30.0 in)
• Barrel Length: 197 mm (7.8 in)
• Weight: 3.2 kg (7.1 lb)

Mark II (Canadian)

During World War II a version of the Sten gun was produced at the Long Branch Arsenal in Long Branch, Ontario now part of Toronto, Ontario. This was very similar to the regular Mark II, with a different stock ('skeleton' type instead of strut type) and improved quality of manufacture. It was first used in combat in the Dieppe Raid in 1942.

Worker posing with a Sten Mk II in the factory on May 26, 1942.

Mark II:

• Overall Length: 896 mm (35.3 in)
• Barrel Length: 198 mm (7.8 in)
• Weight: 3.8 kg (8.4 lb)

Mark III

This simple design was the next most commonly produced after the Mark II. It was a simplification of the Mk I made both in Canada and the UK. Lines Bros Ltd was the largest manufacturer. The biggest difference from the Mark II was the unification of the receiver, ejection port, and barrel shroud that now extended farther up the barrel. The barrel was fixed and the body was welded shut along the centre of the top. Captured Sten Mk IIIs in German possession were designated MP.750(e).

Mark IV

The Mark IV was a smaller version which did not progress beyond the prototype stage. It was near pistol-sized and it had a different configuration with a conical flash hider, a rear pistol grip, a very light stock and a much shorter barrel.

Mark V

British paratroopers in Oosterbeek during Operation Market Garden armed with the Sten Mk V.

Introduced in 1944, the Mk V was essentially a better-quality, more elaborate version of the Mk 2. Changes included a wooden pistol grip, a vertical wooden fore grip, a wooden stock, and a bayonet mount. There was a No4 Lee Enfield foresight and the weapon was of better quality manufacture and finish than the Mk2 and Mk3. The Sten bandolier issued to paratroopers held 7 full magazines.

Another variant of the Mk V had a swivel stock and rear sight mirror intended for firing around corners in urban warfare, similar to the Krummlauf developed by the Germans for the StG 44.

Mark VI

• Overall Length: 908 mm (35.7 in)
• Barrel Length: 198 mm (7.8 in)
• Weight: 4.5 kg (9.9 lb)

Suppressed models

Mk IIS and Mk VI models (sometimes recorded as 6(s)) incorporated an integral suppressor ("silencer") and had a lower muzzle velocity than the others due to a ported barrel intended to reduce velocity to below the speed of sound; 305 m/s (1,001 ft/s). The suppressor would heat up rapidly when the weapon was fired and a canvas cover was laced around the suppressor for some protection for the firer's supporting hand.

The Mk IIS was, as the name suggests, a suppressed version of the Mk II. Captured examples of the Sten Mk IIS in German service were designated MP.751(e).

The Mk VI was a suppressed version of the Mk V. The Mk VI was the heaviest version due to the added weight of the suppressor, as well as using a wooden pistol grip and wooden stock.

The suppressed models were produced at the request of the Special Operations Executive (SOE) for use on clandestine operations in occupied Europe, starting with the Mk IIS in 1943. Owing to their tendency to overheat, they were fired in short bursts or single shots.

In addition to its use in the European Theatre, the Mk IIS saw service with clandestine units in the Southwest Pacific Area (SWPA) such as the Services Reconnaissance Department and SOE's Force 136 on operations against Imperial Japanese forces. The Sten Mk IIS was used by the Operation Jaywick party during their raid into Japanese-occupied Singapore Harbour.

The Sten Mk IIS also saw service with the Australian Special Air Service (SAS) in Vietnam.

Foreign-built variants and post 1945 derivatives

Argentine Sten

Sten MkIIs were licence copied in Argentina by Pistola Hispano Argentino and can be recognised with a wooden handguard in front of the trigger group. It was known as the Modelo C.4. Another variant came with a pistol grip section based on the Ballester-Molina .45 pistol.

French Sten

The French "Gnome et Rhône" R5 Sten, manufactured by the Motorbike & Airplane Engine manufacturer Gnome et Rhone (SNECMA), came with a forward pistol grip and distinctive wooden stock, although its greatest improvement was a sliding bolt safety, added to secure the bolt in its forward position.

Norwegian Sten

In German-occupied Norway the resistance, under the leadership of Bror With, created a large number of Sten guns from scratch, mainly to equip members of the underground army Milorg. In his autobiography, Norwegian resistance fighter Max Manus frequently mentions the Sten as one of the weapons his groups of commandos and resistance fighters used effectively against German troops.

Danish Sten

Several groups in the Danish resistance movement manufactured Sten guns for their own use. BOPA produced around 200 in a bicycle repair shop on Gammel Køge landevej (Old Køge road), south of Copenhagen. Holger Danske produced about 150 in workshops in Copenhagen, while employees of the construction company Monberg & Thorsen built approximately 200 - 300 in what is now the municipality of Gladsaxe (a suburb of Copenhagen) for use by Holger Danske and others. The resistance groups 'Frit Danmark' and 'Ringen' also built significant numbers of Stens.

Polish Sten

See also: Błyskawica submachine gun

Błyskawica and Polish Sten on display in the Warsaw Uprising Museum

The Polish resistance was provided with numerous Stens of various models by the SOE and the Cichociemni. Between 1942 and 1944, approximately 11,000 Sten Mk IIs were delivered to the Armia Krajowa. Due to the simplicity of design, local production of Sten variants was started in at least 23 underground workshops in Poland. Some of them produced copies of Mark IIs, while others produced the so-called Polski Sten and KIS. The Polski Stens made in Warsaw under the command of Ryszard Białostocki were built from a number of "legal" elements made in official factories or acquired through other means. The main body of the machine pistol was made from hydraulic cylinders produced for hospital equipment. All the pistols were marked in English to disguise their origin. Stens' barrels were also used for SMGs produced in Poland under the name Błyskawica.

Gerät Potsdam

In late 1944, the Mauser works in Germany secretly started manufacturing copies of the Mk II Sten, apparently for deception and sabotage purposes. These weapons were intended to duplicate the British original as closely as possible, including the markings. The series was referred to as the Gerät Potsdam (Potsdam Device) and approximately 28,000 weapons were made – even though the Germans had ample stocks of captured original Stens available. The intended purpose of these copies is now uncertain.

MP 3008

In early 1945, Germany was seeking a cheap version of the MP40 machine pistol for the Volkssturm. For that purpose a modified Sten was designed by Mauser and named the MP 3008. The main difference was the magazine attached below the weapon. Altogether, roughly 10,000 pieces were produced before the end of World War II.

Austen Mk I

The Mark I Austen (from "Australian Sten") was a 9mm Australian submachine gun derived from the British Sten gun developed during the Second World War by the Lithgow Small Arms Factory. It externally resembled the Sten but had twin pistol grips and folding stock resembling those of the German MP40. A Mk 2 version was also produced which was of different appearance and which made more use of die-cast components. Although 20,000 were made, the Austen never achieved the success of the competing Australian-designed Owen submachine gun, known as the "Owen Gun".

Imperia submachine gun

After the Second World War the Belgian army was mainly equipped with a mixture of British and American submachine guns. The army, wanting to replace them with a modern and preferably native design, tested various designs with the Vigneron M2 and licence produced FN Uzi being selected. However, the Imperia was an improved Sten with a fire selector and retractable stock.

Sputter Gun

A short-lived American invention developed in the 1980s, the Sputter Gun was designed to circumvent the law that defined a machine gun as something that fired multiple rounds with one pull of the trigger. The Sputter Gun had no trigger, but fired continuously after loading and the pulling back of its bolt, firing until it ran out of ammunition. The gun was very short lived as the ATF quickly reclassified it.

Halcon ML-57

The Halcon ML-57 was a simpler derivative of the Sten gun of Argentine origin that was fed from a vertically inserted magazine.

International Ordnance MP2

During the 1970s-1980s, International Ordnance of San Antonio, Texas, USA released the MP2 machine pistol. It was intended as a more compact, simpler derivative of the British Sten gun to be used in urban guerrilla actions, to be manufactured cheaply and/or in less-than-well-equipped workshops and distributed to "friendly" undercover forces. Much like the FP-45 Liberator pistol of World War II, it could be discarded during an escape with no substantial loss for the force's arsenal. The MP2 is a blowback-operated weapon that fires from an open bolt with an extremely high rate of fire.

Cellini Dunn SM-9

The SM-9 is a machine pistol of Guatemalan origin and manufactured by Cellini-Dunn. It is blowback operated, firing from an open bolt and can use magazines from Ingram MAC-10 submachine guns inserted into a similar grip. The layout of the receiver is somewhat simpler than that of a Sten with its internal components light in weight enabling a very high rate of fire. Its forward pistol grip can hold a spare magazine as well as handling the weapon when firing.

Pleter 91

The Pleter submachine gun was created in 1991 when the breakup of Yugoslavia in the midst of emerging war left the newly-formed Republic of Croatia with small number of military firearms. Since the embargo prevented the Croatian military from legally buying them on open market (so they were mostly obtained on the world black market, but with significantly higher price and sometimes of questionable quality), to fulfill the immediate need for arms, they tried to resort on quick and simple locally made designs.

Despite having a vertical magazine well (designed to accept 32 round double feed direct copy of UZI magazine, rather than original single feed STEN type magazine), analogies with the Sten include a striking resemblance in the barrel assembly and in the bolt and recoil spring. In addition, this gun also fires from an open bolt, and is further simplified by removing fire mode selector or any safety.

SaskSten

SMG International in Canada manufactured reproductions of the Sten in six variants. They made copies of the Sten's Mk 1*, Mk II and Mk III, a "Rotary Magazine Sten" (a Mk II Sten with a drum magazine attached below the weapon and wooden horizontal forward grip on the left side of the weapon), a "New Zealand Sten" (a Mk II/ III Sten hybrid, with sights and a fixed magazine housing similar to the Mk III) and the "FRT Gun" (a long barrel Sten with a wooden or Mk 1* type butt stock, a drum magazine attached below the weapon and sliding ramp rear sights).

Service

The Sten, especially the Mark II, tended to attract affection and loathing in equal measure. Its peculiar appearance when compared to other firearms of the era, combined with sometimes questionable reliability made it unpopular with some front-line troops. It gained nicknames such as "Plumber's Nightmare", "Plumber's Abortion", or "Stench Gun". The Sten's advantage was its ease of mass-production manufacture in a time of shortage during a major conflict.

Made by a variety of manufacturers, often with subcontracted parts, some early Sten guns were made poorly and/or not made to specification, and could malfunction in operation, sometimes in combat. The double-column, single-feed magazine copied from the German MP28 was never completely satisfactory, and hasty manufacturing processes often exacerbated misfeed problems inherent in the design. A common statement heard from British forces at the time was that the Sten was made "by Marks and Spencer out of Woolworth." British and Commonwealth forces in the early years of the war often extensively test-fired their weapons in training to weed out bad examples; a last-minute issue of newly-manufactured Stens prior to going into action was not always welcomed.

The MK II and MK III Stens were regarded by many soldiers as very temperamental, and could accidentally discharge if dropped or even laid on the ground whilst the gun was cocked. Others would fire full-automatic when placed on 'single', or fire single shots when placed on 'automatic'. This was particularly true of early Stens using bronze bolts, where the sear projection underneath the bolt could wear down more easily than ones made of case-hardened steel.

Stens could jam at inopportune moments. One of the more notable instances of this was the assassination of SS-Obergruppenführer Reinhard Heydrich on 27 May 1942, when a Slovak soldier – Warrant Officer Jozef Gabčík – fired his Sten point blank at Heydrich, only to have it misfire. His Czech comrade Jan Kubiš then hastily tossed a grenade, which mortally wounded Heydrich. There are other accounts of the Sten's unreliability, some of them true, some exaggerated and some which are apocryphal. France manufactured (well-made) Sten copies postwar into the early 1950s, evidently believing in the basic reliability and durability of the design.

A well-maintained (and properly-functioning) Sten gun was a devastating close-range weapon for sections previously armed only with bolt-action rifles. In addition to regular British and Commonwealth military service, Stens were air-dropped in quantity to resistance fighters and partisans throughout occupied Europe. Due to their slim profile and ease of disassembly/reassembly, they were good for concealment and guerrilla warfare. Wrapping the barrel in wet rags would also cause the Sten to sound like a heavier weapon, with opposing troops believing they were faced with machine guns. Guerrilla fighters in Europe became adept at repairing, modifying and eventually scratch-building clones of the Sten (over 2,000 Stens and about 500 of the similar Błyskawica SMGs were manufactured in occupied Poland).

Staged photograph: A partisan armed with Sten Mk II smg, France, 1944.

Canadian infantry battalions in northwest Europe retained spare Sten guns for special missions and the Canadian Army reported a surplus of the weapons in 1944. The Sten was not used in Italy due to constraints on the shipping of ammunition; .45 ACP was already being used in that theatre by the US Army and a requirement for the 9 mm pistol round used by the Sten would have been in competition for limited shipping space.

The Sten saw use even after the economic crunch of World War II, replacing the Royal Navy's Lanchester submachine guns into the 1960s, and was used in the Korean War, including specialist versions for British Commandos. It was slowly withdrawn from British Army service in the 1960s and replaced by the Sterling SMG; Canada also phased out Sten, replacing it with the C1 SMG.

The Sten was one of the few weapons that the State of Israel could produce domestically during the 1948 Arab–Israeli War. Even before the declaration of the State of Israel, the Yishuv had been producing Stens for the Haganah; after the declaration, Israel continued making Stens for IDF use. The opposing side also used (mostly British-made) Stens, particularly the irregular and semi-regular Arab Liberation Army.

In the 1950s "L numbering" came into use in the British Army for weapons - Stens were then known as L50 (Mk II), L51 (Mk III) and L52 (Mk V).

One of the last times the Sten was used in combat during British service was with the RUC during the IRA border campaign of 1956 - 1962. In foreign service, the Sten was used in combat at least as recently as the Indo-Pakistani War of 1971.

In 1971 various marks of Stens were used by guerilla fighters during the Bangladesh Liberation War.

A number of suppressed Stens were in limited use by the US Special Forces during the Vietnam war, including c. 1971, by the United States Army Rangers.

In 1984, Indira Gandhi was assassinated by two of her Sikh bodyguards, one of whom emptied the entire magazine of his Sten into the Prime Minister at point-blank range.

In the Second Sino-Japanese War and the Chinese Civil War, both Nationalists and Communists used the Sten. Some Stens were converted by the Communists to 7.62x25mm by using the magazine housing from a PPS to accept curved PPS magazines. An example of such a conversion is on display at the Imperial War Museum, London

The Finnish Army acquired moderate amounts of Stens in the late 1950s, mainly Mk. III versions. Refurbishment at the Kuopio Arsenal included bluing of the arms. Stens in Finnish service saw limited usage by conscripts (notably combat swimmers) and were mostly stockpiled for use in a future mobilization.

During the Zapatista movement in 1994 some Zapatista soldiers were armed with Sten guns.

File:Jungle455656.jpg

A Zapatista rebel in Mexico armed with a Sten

Users

• Denmark: Used by danish the danish resistance movements like BOPA and Holger Danske
• Albania: Used by the Albanian National Liberation Army during WW2. The weapons were supplied by the British SOE
• Australia
• Bangladesh
• Belgium
• Canada
• Ceylon
• Cyprus
• People's Republic of China
• Republic of China
• Commonwealth of Nations
• Finland
• France: Used during WW2 by the Free French forces, the French Resistance and some captured from the Resistance were used by the pro-German French militia Milice française
• Greece
• India
• Indonesia : Used in the Indonesian War of Independence.
• Israel: Used in the Israeli War of Independence.
• Italy (Used by the resistance; fascist soldiers made use of captured exemplars).
• Jordan
• Kenya (Used by the Regular police paramilitary GSU, Army paratroopers replaced by G3A3/4,M4&HK416)
• Luxembourg
• Malaysia
• Malta
• Netherlands
• Nazi Germany: Used some captured Sten's during WW2. Later towards the end of the war used an almost identical copy for home defence—the MP 3008
• New Zealand
• Nigeria
• Norway: Used by the Norwegian resistance, 1940-1945. The guns came to the resistance groups by air (supply dropps). Mainly dropped by the British air force, in deep forests and wilderness.
• Pakistan
• Poland
• Portugal
• / Rhodesia
• South Africa
• North Vietnam: Used by North Vietnam soldiers in the First Indochina War
• South Vietnam
• Turkey
• United Kingdom
• United States: Suppressed Stens used during Vietnam War (used by American special forces).
• Kingdom of YugoslaviaYugoslavia (used by the Chetniks during World War II; In Yugoslav Armed Forces (Yugoslav People's Army) until late 1940s)

Gallery

• 
  Sten Mk II—bolt is not cocked
• 
  Sten Mk II—bolt is not cocked
• 
  Sten Mk II—dorsal view. Bolt is not cocked
• 
  Sten Mk II—detail of rear sight
• 
  Sten Mk II—detail of magazine well and foresight
• 
  Sten Mk IIS (suppressed)
• 
  Sten Mk VIS (suppressed)
• 
  British Paratroops with Sten Mk Vs on D-Day+1
• 
  Canadian soldier holding Sten Mk II guards German prisoners captured at Juno Beach on D-Day, 6 June 1944
• 
  Men of 'A' Company, 6th Durham Light Infantry, 50th Division, in the village of Douet (Grandcamp-Maisy), 11 June 1944
• 
  Close-up of a suppressed Sten (at the top of the photo) on display at the Imperial War Museum
• 
  French Resistance members captured by Milice in July 1944. The man on the left carries a captured Sten Mk II
• 
  Men of the 15th Scottish Division leave their assault craft after crossing the Rhine on 24March 1945
• 
  William Joyce following capture by British troops in 1945. A Sten Mk III is visible in the foreground
• 
  Malayan police submachinegunner (right) with Sten Mk V during Malayan Emergency
• 
  The Monumento al Partigiano in Parma (Italy)
• 
  Yugoslav partisan from Montenegro with Sten (march 1945)

External links

• "Sten Gun to be forerunner of invasion" September 1943 detailed article in Popular Science
• Various high-resolution photos of the Sten Mk II, III and V
• How to field-strip a Sten
• Complete machinist's plans to manufacture a Sten Mk II
• Sten at Modern Firearms
• REME Museum
• MP3008
• Imperia submachine gun